PS5 DualSense Controller Replacement Buttons Installation Guide - eXtremeRate
HTML-код
- Опубликовано: 29 сен 2024
- Finally! The first batch of PS5 controller customized solutions has come!
You have to take apart your DualSense controller to install the customized buttons, the installation difficulty is medium. You have to take good care of all the flex cables inside the controller.
Shop Links:
Amazon US: amzn.to/3T1Yj3q
Amazon CA: amzn.to/3frIuWn
Amazon MX: amzn.to/3DXJBGu
Amazon DE: amzn.to/3NzBCmg
Amazon UK: amzn.to/3zHdM24
Amazon FR: amzn.to/3E0YEzq
Amazon IT: amzn.to/3t4EhuB
Amazon ES: amzn.to/3NDEYVh
Amazon AU: amzn.to/3WuG0qI
Amazon JP: amzn.to/3UjIvec
eXtremeRate.com: extremerate.co...
Aliexpress: bit.ly/3thodG0
eBay: ebay.to/3NXPiaT
BGM Info:
Sage - Slenderbeats
Hi, just a recommendation for people. When opening the trigger mechanism you actually don't need to remove the black round gear since it does not obstruct the pin holding the trigger cap. Just leave it exactly in place and do not move its position, doing so will make sure you reassemble it correctly.
Thanks for this video it's really helpful
Thanks for your advice, will pin your comment! :)
@@ExtremeRate my r2 l2 didn't come with the thing you put the pin through
Do you go,😊
A
@@ExtremeRatehey please respond, can I get the names of the tools used in the video?
@@VectorM67small screwdriver 🪛 and prying tool that’s all you need
I was thinking about doing this before I watched this video. Glad I did, too much work going to leave controller as is. Thanks.
Holy cow! I almost crapped myself doing this! Don't get me wrong, the instructions are great, easy to follow, and over all the process was a lot simpler than I thought it would be.
My issue was at 13:47. I went to grab that pin for the trigger and... where did it go?... I laid it down with the rest of the items, but it was gone! I moved everything around even ended up cleaning my desk off thinking it may have rolled under something. I checked the floor, my pockets, and even my shoes. Couldn't find that sucker anywhere...! After 45 Minutes of searching I finally resigned myself to getting a new Controller, and began putting what I could back together and GUESS WHAT I FOUND STUCK TO THE HAPTIC MOTOR! That little sucker must have rolled a little and got picked up by the magnetic part of the motor. SO... Pay attention folks and check the magnets!
My controller is different than this one.. it doesn’t have a white piece at the top, only the clear plastic. Also no screws on the top portion where the mapping is for the buttons. The way the triggers are installed is way different on mine too. I have the BDM-020, can you please make an updated video
I'm having the same issue. I found this video. ruclips.net/video/W2OHOFgiASU/видео.html
my controller is the same one
I truly appreciate the detail you put in this video. New sub 💯
Thanks for the sub!
Thank you so much, everything was very clear! Finished in no time and correctly installed everything back 😁
Great to hear! :D
Is there any R1,R2/L1,L2 buttons for the bm-30 remote?
Just got mine and it looks nice really cool product thanks for making cool designs for the ps5 controller
Glad to know that and you are most welcome!
🔥 thanks bro!!! I just need to to the back buttons. I’m scared 😂 this was pretty easy and I always break stuff and this I’m I didn’t
Great video! I snapped on of the ribbon cables 😢 thankfully it only seems to be the light for the controller, everything else works fine
yea words would’ve helped explain you just need to remove ribbon and not entire mechanism, im hoping mine was just the light as well as i’ve likely fucked it up, can’t even find a video with someone explaining what they’re doing, shi stupid
Watching like yup I can totally do this until 5:54 and beyond😅 never mind just a face plate would do
oh... If you have big fingers, you need a tweezers to do that step
@@ExtremeRate it’s not that I don’t feel comfortable taking apart my controller like that maybe when I get a 2nd controller I’ll try it
@@KillaFormer9898 You should lol
Yeah I feel the same way. I’m iffy about taking apart my controller cuz my ass somehow would manage to fuck it up lol
@@officialrogueent6836 when you finish your first job you will love this work lol
Just bought off you guys from Amazon only needed a L1 because I dropped my remote off my desk and the freaking button just disappeared so hopefully it comes ASAP thanks guys y’all the only people that make buttons for the ps5
All of our items will be delivered by Amazon, which will fast! Great to know that we help!!! :D
this needs to be updated. My dualsense has different parts inside
I followed this tutorial and now I have the orange blinking lights after install what do I do?
The new shells coming next right?
RIGHT!!!
How can I be notified about new products from you guys?
Subscribe to our channel, normally we will upload the installation video when new products on sale.
I have a question are the ps5 controller buttons similar to a psp? they look quite similar but do they feel similar?
I have a bdm-020 and the triggers dont work i got it on ebay and the package says extremerate and i noticed the black piece that goes inside l2/r2 dont sit well and the button gets stuck when i click it hard any fix?
I have create my own one, ghx for this one, i have install my gold buttons (this video right here) plus the remap kit, looks good and so nice clean. but i got a quest ......What is the Song of This Tutorial??? please give me answers. Thx guys and ExtremeRate🇺🇲🔥
Glad to know you like our products! :D The music is Sage - Slenderbeats Thank you!
Purchased these buttons and the R1 button broke within 2 days because it somehow got stuck in my control, this company just ignored me asking if they are able to send a replacement, considering with the product they send you a card which tells you to contact them on social media, so I did, they ignored me, I highly doubt I will be giving these guys any more money
could you mold some triggers with trigger stops built in please
Thanks for your suggestion, we will look into that.
@@ExtremeRate can I get a pair as a tester for making the suggestion please? :P
using your grips and accents on my PS5 controller. really like your products. thank you
@@k_DEDb07 If we make out something finally, you can! But the triggers are too small to put a mechanism into them, so we are not sure when will this come or if it's possible to come lol
@@ExtremeRate ruclips.net/video/xXqOFDxry-U/видео.html
just after 1min into the video. a mold the same sort of shape. ty tc
@@k_DEDb07 But it does not switchable, I mean it will always be a short trip.
This is so cooooool!!!
Thanks!!!
was following to video well up until the L2 controller at abt 11:20, I don't believe I was sent the black pieces you attach them to
If we paint that insert part in gold, we can't even insert it in the L2/R2, because the paints will make it bigger.
why no gold face plate? instead of the original black one.
it's coming soon!
@@ExtremeRate This video tutorial really made it easy to do!!
@@DarthBreh ;)
10:10 I have to switch to another vid
All done but my left triggers don’t work
Please check the gears inside of the left trigger, you have to install them correctly.
Can't I just pop off the actual trigger from the piece inserted at 11:21like in this video ruclips.net/user/shortsP_2d6M-lw_s? Does doing this break it? Cuz it looked like it worked for him.
It just doesn't seem necessary to take apart the entire trigger mechanism. I just want to replace my l2 since it chipped. And I didn't really want to take apart the entire controller to do so.
Need to do a video on the triggers on their own at like we can tell what the fuck your pointing at
welp i failed when it came to this my black wires came undone
Which black wires? Do you know to solder?
Followed all the steps now the controller won't turn on
Please re-position the connection part of the conductive film under the buttons
@@ExtremeRate thank you very much yea I connected the r2 trigger wrong
@@eliozavaleta5940 Glad that you fix the issue! :)
Man fuck this lol. Goid video, but this is way more work than I'm willing to do for black buttons lol.
😲😲😲😲🤗😍👍👌👊
;)
Are you not supposed to put the tension springs back on the L2 and R2 buttons? I replaced mine and now the L2 and R2 buttons are kind of tight. When I press them down they hold in that position for a second or 2 before snapping back up to their normal position. Any advice or tips to correct this would be greatly appreciated.
On the video you can see them back on but guess it didn’t make it in the video 😒
Just installed and there is a dead spot now at the beginning of the press for the L2 and R2 buttons (adaptive triggers) now. It doesn't sense anything until I push maybe 10-15% of the way. (Before it would sense as soon as I push at about 3%. I double checked the gears and everything seems to be installed right. Any ideas?
Please check the rubber pad under the LR buttons if they stay in place or not. Also, what color have bought?
@@ExtremeRate It's a red color. Also I don't see what rubber pads you mean. Do they come with the buttons? Or are they on the controller? When I switch it back to the OEM trigger it works fine. But then when i put on the extreme rate trigger it doesn't work.
@@4K60 The rubber pads I mean are on the controller, right under the L1 R1 L2 R2 buttons. As we test, they work the same as the original ones (our original controller A triggered when about 5% and we put the red L2 R2 buttons on controller B it also 5%, and then we install the same buttons to the controller A, it triggered slightly longer like to the 6% or 7% of the distance.). So I assume that the difference caused by the different controllers.
I would have LOVED if you had actual closeups of the really detailed parts. Please do that if you ever make another video. I completed the controller, but not without a lot of hassle because these scenes were not zoomed in enough.
hey guys, just finished installing one of your kits. worked great. however you should update the video to work with the newer version of the dual sense. There are some differences in assembly I had to guestimate. All in all though, quality product, I purchased the translucent blue ones with the front cover as well for my light blue V2 DS5. Looks amazing now.
Same here. Struggling with the triggers
Common knowledge should let you get around most kinks in the differences. I installed the kit with the newer controller. I could help!
@@Brimoe18
^
@DaEngineer I slready did it, it didn't take long. I was only leaving a comment to mention they should have an updated guide
@@Spectrre_K31 I can’t figure it out🥲
Jesus fucking christ, I'm halfway thru and I don't have a pair of fancy flex wire tweezers, so I just stripped the coating off the tiny wire in the trigger housing. Man I regret this and if you're on the fence don't buy this shit, the installation is ridiculous
Do you guys have plans to release the actual housing for the dualsense I've been using your products for years now for both Xbox and ps4
Hi bro, the front and back shell of the DualSense is coming, please stay tuned!
@@ExtremeRate omg yes please im dying out here oem is never the answer
@@CobbInterscope :D
PLEASE RESPOND; so I did this with my faceplate like 5 times or more like that all day on online school, and the l2 button Is sticking and the adaptive works and it just sticks down snd the r2 button is clicking like tic Tic Tic. It’s annoying and i did this process and I have been watching this video a lot too and I commented a while ago on the other controller (touchpad) that’s fixed and I got new r2 and l2 shocks and that does not work. And whenever I close my controller (when I’m done,) the l2 button gets stuck when you press it snd you have to like pull it up. So please help me!
Please check the gears inside of the L2 R2, they must be messed up.
Holy crap this controller is like trying to disarm a damn trip mine. Had me sweating and shaking 😂 but I got it done both face plate and buttons
You are awesome bro!!!
Thank you. Looked intimidating at first. But I kept watching the video and got through it.
Yo I BOUGHT everything off you guys amazing keep doing what you doing everone watcging this video return thw buttons you got and get them from these people
great job but what about back buttons?
They're in the works
They told me March, but possibly April.
Please stay tuned!
Man that took a WHILE x_x but I followed the tutorial and I eventually got it done! ^^
Great! Good job!!
Not even exaggerating it just took me 24 hours to finish my controller. I kept getting pissed off and having to walk away lol
@@joshuajoel947 lol
@@joshuajoel947 Yeah best not to do that shit pissed off lol I’d fuck it up n then be more pissed lol
I purchased a couple of these kits months ago so i could color code my controllers. I purchased a new controller the other day and was wondering if there are any plans to make a kit like this for the new model. Thanks much and after 6 months of daily use the other kits are holding up great!
Oh theres lots
Swapped out my buttons and lower face plate with chrome blue ones from you guys today. All fit perfectly and it looks awesome 😁
It's great that you love them!!! :D
Soooo. After doing this my R2s “adaptive trigger” feature no longer works. Any idea why?
Please check the gears in the adaptive trigger part if they installed correctly. You can compare it with the left one (but don't mess up the left one..)
I just bought triggers buttons LED kit paddles clicky buttons a front shell a trim and clear interchangeable joystick and buttons all from extremerate I'm gonna show everybody the end result
Can't wait bro!
Moin, wo bekomme ich diese schwarzen Teile für die R2 & L2 Tasten her ??? Bei Minute 11 werden sie in die Tasten geschoben. Meine gekauften Tasten haben das alle nicht bei liegen, somit kann ich die R2 & L2 Taste nicht nutzen🤨 Bin für jede Hilfe dankbar
You just need to take it out from the old l2 r2. I just changed my buttons and i didnt get that thing too. So i just forced it out with a flat head and it came right off
My r1 button has some type of defect. When I press it down it gets stuck in place. I looked closely at the inside and it doesn't seem to be damaged or defective. But it isn't usable
Hate to say it but I’m getting a refund the r1 and L1 are just too big for my controller but if there is a way to fix this please drop a videos about it🙏
Do all your button kits come with the l2/r2 pieces? I heard you have to remove them from the OG controller which isnt easy
Our kit come with the L2 R2 pieces :)
Spent a fucking hour at this thing just replacing the silicone pads behind the buttons. Takes 5 mins with a ps4 pad. Nightmare! Thanks for the vid however OP.
Pure awesomesauce! 🤟🏻 Just put mine together using this and one of your other videos, thank you so much. 👍🏼
You are most welcome!!! :)
What other video ?
So I followed the video and I didn’t switch out my R2 cause I wanted to keep those ones black but for some reason my r2 isn’t working now. Are they any ideas why?
Instructional videos:
“ya know what we need to REALLY teach people? Obnoxious repetitive music.”
But nah tho. Solid video. I feel less scared about replacing my (already worn out!!!!) Left stick
lol Anyway we are glad that if we can help :D
I reassembled my controller with no problems however now the controller has a weird clicking sound that happens at random? Not from any of the buttons like the controller itself just makes a click sound
Honestly pissed that i nit only wasted my money on this and it not being the right one for my ps5 controller, now i have to buy a new to replace the new one i fucking bought for this. Complete bullshit.
Do you know what I’m supposed to do after I accidentally rip a flex cable
I did the same thing with the mic flex cable, ordered a replacement on amazon for $6
@@katherineashley6804 thank you
I don't like how complicated it is, because I'm too scared to break my controller or something cause I'm not good at taking electronics apart.
Dude I’m not blaming it on y’all but some wires got pulled out of my controller due to it just hanging I couldn’t really hold it in place either but please do update am installation video for the updated controllers
Just installed on my controller. Are the triggers (L2/R2) suppose to feel much different? Mine feel super slow and shorter actuation
If you are using the older BDM-010 controllers (CFI-ZCT1* not CFI-ZCT1*A). The issue could be the motor reassembly where the trigger arm wasn't line properly with the wheel. However, I doubt you would've messed up with both.
The more likely reason is you are using the newer model in which the trigger buttons are the only ones that don't work with the new Controllers. They do not fully extend by a tiny bit, and will not fully depress by almost a 1/4 inch.
same
can anyone help me...just did mine and for some reason everything but L1 works...any suggestions?
L2 and R2 are too big for the case, you push them down and they dont spring back up, they're stiff
What's the version of your controller? Please refer to this link to identify your controller version: gamingcobra.com/blogs/news/how-to-identify-bdm-010-bdm-020-version-of-ps5-controller
I’m so confused how to change my triggers, I don’t have the screws on the front of the controller under where the buttons go so idk what to do now
I did this now my l2 r2 and r1 doesn't work. But my l1 button still works please help !!
Will there be a version with button labels like x square triangle and circle
Will have something like that in the next few months
You guys should make a xbox elite series 2 see through case with led lights if that’s possible. I would def cop. Plz respond
Sorry, we did not make the mold for the bottom shell of Elite 2 :(
what if i re build the controller but when i try to switch it on a yellow light pops out and the controller can't work
Very nervous. Ordered buttons how difficult is it with the step by step? I’m nervous about breaking something
Samee
If you mod a PS4 controller before, this mod is easy for you. If this is the first time to mod a controller, then you have to watch the video carefully and follow it step by step, it won't be very difficult. Just put more attention on the L2 R2 triggers.
@@geroldwalker1981 If you mod a PS4 controller before, this mod is easy for you. If this is the first time to mod a controller, then you have to watch the video carefully and follow it step by step, it won't be very difficult. Just put more attention on the L2 R2 triggers.
Hello, this installation worked well, except I was sent two R1 buttons, how can I contact someone to get the missing L1 button I need?
We are sorry about that please contact us via email to info@extremerate.com, we will send you the replacement immediately.
After install, I have this constant clicking on the left side of the controller when I turn it on
ever since I put these on, my L2 is making a clicking sounds.
I'm getting the chrome gold replacements for the midnight black dualsense controller when it comes out
Would be a great match!
R2 button is now stuck and no matter how many times I fix it it won’t work smh
I dont understand the r2 and l2 part mine doesn't have screws on the from of it to get it off
They changed the insides of the controllers. Got a updated video?
My L2 and r2 dont fit it gets stuck when i click them all the way down
If you just want to do the back buttons (R1,R2 L1,L2) do you have go right down to the mother board or can you just flip and change them
You still have to do so.
@@ExtremeRate thank you
@@Luke121201 You are welcome
Hice todo como el tutorial y ahora mi control, cuando lo uso el personaje solo da vueltas y mira para el cielo.. Ayuda!!
En que juego?
Hi! I recently purchased your Lofty Remap Kit for my Xbox One controller, reading the manual and looking at all the circuits I see it has room for two extra K buttons (K3 and K4) but the back shell has no room for these, is there any backshell with 4 holes for the K buttons on this kit? Thanks in advance!
The K3 K4 on the PCB will work, but we don't have the bottom shell with 4 holes lol.
@@ExtremeRate I see, so I guess I'll have to make that mod myself... and that sounds exciting!
Thank you!
@@thagirion218 Yes, that must be an extra fun from the kit :D
Just wanted to point out that there is a new PS5 controller revision that is not fully compatible with these replacement buttons. I just got my hands on a PS5 and bought an additional controller. The internals of the controller that came with the PS5 are slightly different. In particular, R2 and L2 have a new internal shape, so the replacements do not fit properly (The trigger will not be able to press down all the way). I struggled with my first controller for about an hour and then decided to open the other one and compare. The replacement L2 and R2 fit right away into the "older" version of the controller.
The new revision has all silver screws instead of black, and does not have the white plastic bar shown at 6:55. If you have one of those I would recommend not even trying replacing the shoulder buttons. The face buttons come off exactly the same as shown in the video though.
Do you plan on updating your R2/L2 buttons to match the new PS5 controller revision? It's really a shame the buttons I got are not compatible with my controller.
@@patricionoyola6004 Thanks for the information! But unfortunately all of the controllers here are "old" versions. So where have you bought the new version controller? And could you please let me know the model number that is printed on the bottom case of it? And if possible, could you please take some photos of the differences inside the controller and send them to ray@extremerate.com? That would be a great help for us! Thank you!!
@@ExtremeRate sure thing. I'll send over an email later in the week
@@patricionoyola6004 Haven't got your email yet bro
I thought I got two L2 buttons because it only works on one side and they’re designed the same. The notch only fits properly on the left side but I guess this is because it’s a kit for older models? Based on the trigger and your images I have BDM-020 but I also have silver screws and no white plate. Really disappointing the triggers don’t work
Why no solid home button like you originally showed?
It's not looking good
The trigger add a whole new level of difficulty to this. I can did everything else except triggers. Requires more alot of patience
So the shell is not as hard to open as I thought. But everything else is much more complicated than the DS4
Correct, there are more components than the DS4.
DS4 is cool
I’m usually good with my hands but I’m a little worried about doing this even after watching this video should I be?i’m scared to start and not be able to finish it for any reason.
If you ever replaced the buttons or shell for PS4 controller, it's easy for you. If not, then you have to follow the video carefully.
@@ExtremeRate I have but I can’t remember which Generation controller maybe the PS4 I’m always changing something lol.thanks for the message bk what’s the worst can happen just buy another controller lol
@@craigjonsmith That's right lol
I messed up on my wife's controller and ended up snapping one of the wires that go to the rumble attachment. A quick soldering job, but probably the worse thing I've encountered. Just be patient and careful.
I was hoping to find a faster method, but I guess that's as fast as it gets. I hate how changing the R2/L2 buttons makes the process much longer and a bit trickier. The rest is pretty quick and easy.
I installed this on my ps5 controller and it have me drift and wouldn't work on any game
There must be some problems when you reassemble the controller. Please take everything out and do the installation again like exactly the video showed.
Ok thank you it started working agin
@@xillityfn_1939 That's great!
After getting mine in pink
Everything fit exdcpt the triggers
I literally had to sand them down in the back just to get then to fit in the housing
I discovered the paint was the problem
I thought the plastic was pink all the way through
But sanding down the back showed me that its white plastic with pink paint
Maybe go thinner when apply the coats please. Other then that the buttons work and everything fits
Sorry for the issue and thanks for your suggestion. We will report this to our factory!
I got some chrome buttons for my old ps4 controller a few years ago (not from you) and after a couple weeks the chrome finish started wearing off...I want the chrome now for my other ps5 controller but will that happen again with these?
Would the metal buttons from the ps4 controller fit on the ps5 controller?
The metal Dpad yes, but the Square-Cross-Circle-Triangle need modifying to fit
do thjese work with the new dualsense edge?
Just followed along with this video. Some of mine is different internally and the L/R buttons don't fit. So I wasn't able to use them but the rest fit.
Missing the inside buttons for the L2 and R2 buttons. Only found out when it was too late and was very sad 😥
Thank you I was able to swap my ps5 controller shell and buttons, and i even managed to end up with 2 extra screws 😅
Does this work for the nova pink controller?
Triggers didnt fit and i had to force it back out sense the metal bar was jammed in there i was able to fix it and put the old black ones back on but now my controller does a constant click on the right trigger mechanism at all times when the controller is on
What about the spring on the L2 and R2 ?
You don't need to take them off during the installation
Can anyone, ANYONE, please help me with my issue regarding my triggers not being able to fully side in on the contraptions that come with them? It would be much appreciated since I'm not getting any responses anywhere I go.
EDIT: I didn't push hard enough. 😂😞
Please contact our customer service via email at info@extremerate.com and also send with a picture to describe the issue, we will help you out or send you the replacement, thanks!
That is waaaaaay too much work. I'll pass lol