eXtremeRate PS5 DualSense Controller DTF LED Kit V3 Installation Guide - On/Off Sync with Controller
HTML-код
- Опубликовано: 16 сен 2024
- The eXtremeRate PS5 controller DTF LED kit V3 upgraded function:
1. The LED sync with the controller on/off
2. Optimize the thumbsticks parts, side lights from the main FPC board, no more circle board
Installation Tutorial (with commentary): • eXtremerate DTF LED v3...
Shop Links:
Amazon US: amzn.to/3T0oYOj
Amazon CA: amzn.to/3SZJoH9
Amazon MX: amzn.to/3DXJBpY
Amazon DE: amzn.to/3FJry8g
Amazon UK: amzn.to/3fzKyeQ
Amazon FR: amzn.to/3SZ71zC
Amazon IT: amzn.to/3DDfcvI
Amazon ES: amzn.to/3NH5XQ0
Amazon AU: amzn.to/3WwMOnW
Amazon JP: amzn.to/3UehPv5
eXtremeRate.com: extremerate.co...
Aliexpress: bit.ly/3tgxf6i
eBay: ebay.to/3TqTKjn
The rest of the world:
eXtremeRate.com: extremerate.co...
Aliexpress: www.aliexpress...
First things first: Incredible product.
I just received mine today for the BDM-020 (thankfully both of my controllers are this model), as well as my Canada themed front shell and black pebble-textured back shell (yep, I went all out. Merry Christmas to me!).
The shell replacements were super easy. The key thing to remember (and I'll mention this again) is that you GO SLOW and TAKE YOUR TIME. Do NOT rush anything, despite thinking you know what the next step is. Even if you're right, just follow the instructions because the BDM-010 and 020 have different internal placement for some minor components that can make for a major headache if you skip steps or jump ahead.
The LED kit was, thank the electronic gods above (and ExtremeRate) that there was NO soldering whatsoever and they even supplied the PVC tape to keep the one end from shorting out (merely as a precaution) and to keep some of the other circuit strips from getting bend or tangled. Very thoughtful of them!
The placement of the circuit strips/wiring was spot on and not wild amounts of extra length to contend with. The ease of which the parts went it (again TAKE YOUR TIME and PAY ATTENTION), was like a breath of fresh air. Directions on each of the videos that I watched for all three pieces (front shell, back shell, LED kit) were perfectly paced, very precise, and even included moments of pause to highlight where each screw would come out/go in, and even had little arrows to show you which direction to turn them so they wouldn't get stripped.
Included in the package was a small screwdriver designed for the screws, a small baggie of extra screws, and a plastic pry tool/spudger. They indeed placed everything in the box that you would need so you wouldn't have to scramble looking for something to use. Again, a very contentious and thoughtful company that wants to make sure you and your product succeed.
The instructions for using the LED kit once fully assembled was great and straight forward.
In the future, I will definitely be purchasing one for my second controller as well as an additional new front and back shell replacement.
Thank you once again, ExtremeRate, for making not just my controller level up... but everyone else who gets one.
How can u tell which model the controller?
@@jose33315 there’s a chart on the website the difference when u push the trigger down or you take the controller about and look on the motherboard
What’s the battery life like on your controller now? Has it changed at all?
@@TsuniigamingI heard there’s mabye like an hour less, which isn’t a lot
Finally an led kit without these rings which have these adhesive. Thanks for this extremerate. Maybe I buy one of these.
Thank you bro!!
Nice you guys finally made it so the LEDs don't go over the thumbsticks! I'll be making an install video and review on my channel
Thank you bro! Looking forward to your voice on it!
@@ExtremeRate can the back button kit still be used on it?
@@JMAGG yes it is. The answered the question in the FAQ at the end of the video. 21:31
@@JMAGGI have the led kit, clicky buttons and back paddles all in one controller
Bro did it all right here wym💀💀💀
This is so much easier and more complicated at the same time. Definitely a step up though. I'll be buying these in bulk real soon
Do these work with a scuf PS5 controller?
Can't wait to do this along with adding the back buttons. Finally has the LED Sync feature.
:D
Does this mod works with the back paddles kit?
@@foxhoundz3 Have the same question!
@@foxhoundz3 Yes it can. just install the r1r2 ribbon kit to the rgb one and not the back paddles
I have a different ps5 controller
Very helpful. I used to do this with PS4 remotes but those were hell with soldering. Jesus Christ this is 10x better! thanks for this easy process
Glad that you like it! :D
@@ExtremeRate I did the install but when i charge my controller the yellow charge colors come on but the controller won't turn on for me to play it
Just installed this on my controller...a few hairy situations with a cable or two and not pressing the joysticks on hard enough but all worked out in the end has worked perfectly so far. 👍
Good to know that!
This was easier than I thought and worked out nicely. My only complaint is that I installed your buttons on 2 separate controllers, and the share and start buttons seem short and don't protrude out as far as on a stock controller. It still all works, however. Other than that, this and the clear blue shell are solid products. Thanks!
ruclips.net/video/w2LK7gSJB6M/видео.html
i know this comment was a year ago but im having the same problem with mine and im just wondering how did you fix it? or did you just deal with it?
Same issue, why don't they respond??
If only there was a way to have the face buttons light up in their original colours.
🔺️ = green
○ = red
X = blue
□ = pink
I wonder if it'd be easier getting four sets of buttons in the right colors, then just use the matching one for each? 🤔🫡
Thanks for video I watched twice and installed my LED RGB kit v3. Also great music 🎶. I will be building another one.
I installed this all correct no pinched wires or anything I've modded a few of my sons ps5 controllers....I press the PlayStation button it all lights up then shuts off??? Any feedback would be rad
Would love the bdm 020 version
habe es mir gerade bestellt bin ja mal gespant und ich finde es cool das es da zu ein video giebt wie man es zusammen bauen soll
😀
I accidentally bought this kit without knowing it wasn’t for the 030 🤦♂️ you guys should make one for the 030 a lot would definitely buy
Can the LED button colors be set to always match the touchpad LED?
Idk if it’s me but this thing didn’t work and I followed all of the steps
Yeah
Mine don’t work either
I really wish I had a controller compatible with your products 😭 when will you guys come out with 3rd gen stuff?
How do you know if your controller is a 3rd gen
The lights turn on but won’t turn on by doing the command
I'm so confused. My controller can't turn and the led turns red when I plug it with the battery. I can't use my controller or turn on the led
Will you be able to implement the non circle joystick led process on the Switch Pro Controller boards? This is truly revolutionary!
Non circle for the Switch Pro is not possible because the lights will be blocked by the middle frame of the controller. So we are working on the possibility of stick the light board on the middle frame.
@@ExtremeRate I just saw this reply, I am so happy to hear you are working on a solution! If the lightboard is on the middle frame, would it be bright through your translucent Shells? I have the blue see through shell now. I will definitely buy whatever replacement kit you make for the pro on day 1! You guys are my go to place for mods
Followed this video as best as I could got excited but no luck
Thank you extremerate today got me From Amazon And i Installed to my controller ps5 BDM-020 and everything Is good without any problem ❤
How u know it was bdm020?
@@jamiebill1503 There is an explanation of the product and how to identify the model on Amazon before purchasing
Do one for Dualsense edge + video
Do you know why my controller isn’t Changeing colors after I installed all of it
So for these led kits, do you have to use the buttons they give you?? And can you put this on a scuf controller?
Any chance you can release this with normal/original looking buttons in the future? Would totally get it but the weird buttons are a deal breaker for me rn
A bit late here but
You can just use different buttons, they're not a part of the LEDs so just use the original buttons or buy new ones
i installed this on my controller, and the lights, and buttons all work fine. EXCEPT. the combination to turn the lights on/off or switch the colors does not work for me. any ideas on what to do?
Did u ever figure this out? I’m having the same problem where I can’t turn the colors on after the initial red light
had to tweak it a little but it works fine! would recommend
Can't turn on or off and change coloros?
I bought it but there was a problem
It looks like I have a different version of the joystick and it didn't fit 😕😕
Can I purchase a pre-made from your company directly? Cool kit but I'm lazy and am willing to pay extra 🖤
Mine isn't turning off and it's not changing colors
Started watching and didn’t even wanna buy the LEDs way too much
12:50 wanted to ask how hot the part was and wanted to buy it from amazon
I build the kit in the controller . Led's working, but now R2 is always in on , cant stop IT. Did someone know what was my mistake?
I don’t understand the point of taping one end to the back of the battery. Why is it even there if it’s not plugged into anything?
Would love to see this for the Bdm-030 series controllers. I just picked up my Ps5 for Christmas. And both of my controllers are bdm-030 🤷♂️
I unfortunately purchased this and learned the hard way after taking the controller apart
How do you know if your controller is a bdm 30
Please make an installation video for installing hall effect triggers on a PS5 Controller THAT WOULD BE LEGENDARY THANK YOU!
It's extremely difficult bro!
Do you have a video for this kit and the rear buttons for installation?
Not now, but it's not difficult if you watch both of the 2 videos
My controller doesn’t have a rubber pad.. 17:28
Nice. I understand cleaner. Good😊😊
U got any new wiring for the new bdm controllers? Bought ur product but the orange connector doesn’t align and is to short, also the second wiring doesn’t have a place to connect the big one n bending the R2 button.
I'm having the same problem
Same issue here idk what to do
@@Blvck-Jxss it’s cuz there’s different models on the controllers. But they recently released the new kit for the new version controller. So look for the led kit that says like 030 in the description. If it says 010-020 it’s not that one
Please make a Video how to install this kit with the remapping kit. Thanks :)
How do I get into the settings to select the different lighting modes?
The description says:
7 different colors, red, green, yellow, cyan, blue, pink, purple. And with slow blink and fast blink, there are 9 different modes.
Anyone else have an issue where the LED is stuck on red and you can’t control it at all?
Bruh same
✋🏼
In my case, the power connection for the battery is too thick for the housing,Now all the buttons don't work because they're squashed
Is there another tutorial for the other Battery connection
The connector was too short for my controller 😒
I can't get it to change color, seems like a popular comment here, any advice??
I have 1 questions do i cut the same you cut on my controller 🎮? BDM_020 short and BDM_020 long strip ?
My controller says BDM_30 but the strips is BDM_010 AND BDM_020 can i cut off both BDM_10 AND INSTALL WITH BDM_020 LONG/SHORT ?
I installed this on my controller and it works. However, it is not allowing me to change the color despite following the instructions at the end. can someone help me with this?
My ps5 controllers don't have them plugs on the sides of the motherboard. This didn't work for me. A little upset but I'll do some more research to see why this ain't working on my controllers
did you ever figure it out? I'm having the same problem
The lights work and I can navigate the PS5 home screen with no problem. Access settings and all. The controller acts normal but when I go into any app or attempt to play a game the controller is unresponsive unless i plug it in directly to the console via USB. Can someone tell me what I did wrong. I even reset the controller with the small hole 🕳 in the back of the dual sense and I get the same result....
🗣️ PLEASE HELP ME 😭
did you ever figure out what went wrong? I have the same problem
@@nadir5644did you figure it out? I’m having the same issue
I hade this issue mine was I put the screws to tight inside I hade to back em off a bit and then it worked fine
Is there a way or product you have that will change the blue led lights on the sides of the controller?
I lm stuck at red led. I cant change the colors. Can’t turn off.
I did what you said perfectly. I did not mess up at and still my controller is fucked
Would be awesome if LED colors would be synchronized with dualsense touchpad LED color.
Yes! But just this is kind of impossible.
@@ExtremeRate Ok( You know better of course. Can't wait my rise4 arrive))
Looks good!
Thanks!
LED won't power off, and I can't change colors (stuck on Red). I double checked the DTF LED Flex Cable connection and it is aligned to the columns of middle frame bracket (as per the FAQ section of this video). The Gamepad Tester (PC) shows B6 stuck at 1.00 and the L2 button is Black on the screen. How can I fix this? Thank you in advance.
I tore the little hole at the end of the led ribbon cabble😢
I were perfect at installing but I accidentally cut off the FPC cable 😢 It with be amazing if I can get the free one
Got the Rise Remap installed and the LED Kit on its way :D Wich wires should be used?
I bought one but after taking apart my controller my circuit board and wiring is different much thiner white straps and this video go fat brown strips could still use this or have purchase something different
The installer of the led does not fit how can I fix it
im having a problem where once i screw in the back plate, the joysticks dont move back to the center
I have installed the LEDs and everything and when I try to turn them on, nothing and this is the 2nd board I’ve gotten. Any suggestions?
I followed everything, but I’m having an issue of the buttons working in apps/games. In the Home Screen everything works fine just buttons stop working once in game
did you ever figure out what went wrong? I have the same problem
@@nadir5644 yeah I’d recommend downloading or going on game pad tester. Check and make sure all the buttons are working my issue was actually I forgot to connect the whole right controllers button ribbon connection in correctly. Once I figured that out it was smooth sailing. So what I learned is if any of the buttons don’t work on the controller the game/app won’t register or let you use that controller. I assume it’s an anti cheat protocol.
@@MiguelAXFlo hey bro I’m having similar issues everything connected but my L1 isn’t working
Hello, is this compatible with the RISE4 Remap Kit?
Hey who can I put on a back paddle and this on this video I’m confused because they’re supposed to connect on the same part
What do you do if you cut the wrong piece I cut 20 instead of 10.
I know it's been 8 months but it says in the video you can get another free one if you cut the wrong piece
Looking to build a controller following this video i have 2 questions if you can help please 1 whats your ebay name 2 how do you know what model your controller is
I got it for the ps4 controller end up great but did not last... It killed my controller 🎮 battery 🔋 in 1 month only... I'm have ordered new battery from AliExpress hopefully it will make it work again
I can enter the colour change mode and the LEDs are flashing, but I cannot change any colour. The right arrow does not accept the action. In the menu, however, the right button works. Please help
I ordered from amazon, the cables are already cut, screws, screwdriver and the paper guide are missing. The cables are bend and dont stick anymore because they are used. Why are you guys sending used and incomplete packages?
I ordered the rise 2 remap kit, and also its plastic not metal.
Sorry for the issue bro, someone must be returned the kit to Amazon warehouse as "new" condition. Please contact our customer service via email at info(at)extremerate.com with your order number and describe the issue, we will fix the problem for you. Sorry again.
@@ExtremeRate i refundet it and bought a new one that works perfectly fine. Really good product 10/10
How can I change the colors to just white?
I feel like white only exists in the colorchanging mode…
Well I destroyed my controller it was a fun and challenging experience opening it up though
I do not have insulated tape. Will that be a problem? None came in the packaging.
Hi eXtremeRate
Is this compatible after adding the following modules :
eXtremeRate Face Clicky Kit
eXtremeRate Clicky Hair Trigger Kit
eXtremeRate RISE4 Remap Kit ?
I have already installed these 3 modules on my controller.
I did everything exactly I believe and even checked the connection part of DTF LED flex cable if its aligned with the columns of middle frame bracket and i still cant change the lights or turn it off. I can only use red lights. This is incredibly annoying and I would love to see a solution. Thanks in advance.
For those hold up and right on Dpad with square 😅
I thought i was the only one
Same here
Did everything and for to change the start and menu button 😂 I am not taking it all off again
So the custom flex cable is literally just for the rise kit?
Completed the mod last year and worked great for many months. However now the controller doesn't come on, it doesn't even charge anymore, any tips for a fix?
you battry is killed
Nice ... I have one Problem my L2 tast is Stuck
Is there a way to make these work with bd-040 model controller? If not this sucks and i just wasted money on either the controller or on this set....
This kit is compatible with the BDM 040
I had the older Version to this and it would drain my battery even if I didn't have the lights on I wonder if the fixed this problem with this version
I just done mine and now my L2 dont work.
I put everything in order lights work but for some odd reason I can't start anything with the X button on ps5 any ideas?
Please re-arrange the connection parts at 8:25 to make every pins connect correctly
If I did this I would probably break my controller so I have to find a person to do it for ms
can i instal the rgb and clicky button together at the same time
Hey I can’t play any games when I press x to start the game it doesn’t work
so I can't mod it to led v3 + back button 2.0 at the same time right?
I followed all the steps and i chant get it to turn on
Its working together with your Paddle Set?
My lights come on but the controller won’t connect to the ps5. The LEDs also only stay on if the controller is plugged in. The ps button or anything doesn’t work and I’m not sure where I went wrong.
It will be your ribon cable i had the same problem it was off by a mill i used paer thin double sided tape to pull it up in place
My R1 doesn't work after all this. So redoing now to see what's wrong
I’m having the same problem too. Did you ever fix your controller?
@@bigrcarreon6ift603 yep yep! I had my input still not put in (the one connected by a cable) or something akin to that. Just need to retry and take it slower if it's your first time like mine was
@@randallholloway8686 ok I’ll try that now.thank you for a response
@@randallholloway8686 did you fix ? I have 2 inputs and one output one for lights and one for R1 😅
i installed and tried this and my middle touch pad doesn’t register
My speaker does not work, I already checked the correct position 13:23 and it does not work. no funciona mi altavoz, ya cheque la posición correcta 13:23 y no funciona.
The instructions are great, however I have a problem. The Leds light up but the buttons do not work, then I have removed the Leeds again and installed everything as it was before. the controller works. I have a BMD-010 and so I also trimmed the felx cables. So everything that is BDM-020 I have cut.
Same issue with the 020 my L1 isn’t working
im going through the same thing
@@jamesmadedareel3166 I got a replacement kit and this one did not work either. The controller is the right one.
@@NL1488 yea this kit doesn't work for ever controller
If the light was dimmable, would also be nice
Will you ever release a version for the BDM-030? thnx
What I do if I can’t get my lights to change colors ?