This worked thank you. (hd0,1) needs to replace with your hard drive partition. it might be sound like (hd0, gpt2) etc. (hd0....) (hd1...) means your hard drives. Hope that helps in future. Don't be scared. Good luck. :)
This method is effective; however, ensure to locate the correct partition. For instance, in my case, the partition was in a different location (hd0,gpt1). So, be certain to identify the correct partition that contains the Efi folder.
Thank you so much bro, its work for me And guys if try to (hd1,1) like video it doesn't work maybe, but you can find your root and try one to one (to find your EFI) using command ls if you want to see your root
Omg I can’t thank you enough. I got a new ssd for my laptop. After migrating os and inserting the disk in, I stuck on this GRUB screen. I googled for 3 days for solutions. There was a lot of good videos/advices (honestly I’ve learned a lot of new info lol). But nothing helped me. Today I ran into this video. Short. To the point. Thank you very much! PS. In my case I had to use hd0 instead on hd1. Just in cases someone else get „hd1 doesn’t exist“ problem.
I see mang tutorial, but I still don't understand why I can access Bios or boot menu when stuck here, although other can access this. Finally I get out by using command
At first it shown error the mentioned root directory didn't work for me , so listing the root folders and executing for each directory worked perfectly.. Thanks man
Yep I have the same problem on a gen8 HP DL560 server - I’ve configured the logical drive from the ROM-based array setup utility, and trying to install windows server off a Ventoy 64gb USB, and it boots into this Grub mode and then can’t find this efi file. Stuck!
you gotta find the linux image in your system. If that doesn't work do you still have the usb you used to install linux? Put that in and try reinstalling. Also if you use arch (btw) run archinstall after boot to auto-install arch.
'exit' and click enter ,then choose Microsoft boot from the menu this will boot you to Windows later we have to change default boot method to windows via boot menu
hello please help me about this. I try this also but not work File not found for Insmod part_gpt No such command: chian grub4dos 0.4.6a 2018-11-05, root is (0x80,0)
After following these steps i got this massage : /EndEntite File path: /ACPI(a0341d0, 0) /PCI(0, e) /Sata(1, ffff, 0) /HD(1, 800,32000,3b98a43fae930c49, 2,2) /File(\efi\microsoft\boot) /file(bootmgfw.efi) /EndEntite
Hola.buen videos ,ya lo intentado pero no me funciona,noseporque En el comando : Grub>chainloader /EFI/Microsoft/Boot/bootmgfe.efi (no me funciona me sigue poniendo not found ) Aún lo puse bien puse Microsoft Chainloader EFI/Microsoft LO PUSE ASI Y AÚN ASÍ NO ME FUNCIONA .
I get the same problem. “File … not found”. Doesn’t say anything about the hd/partition/filesystem - so I think i selected and set the right root hd/partition.
Wow it worked! This was the best solution! U are so underrated, you’ve earner a sub:)
Can you help me with the commands, I can't see it very well
Its in the description too u can copy and paste
thank you man , you & guy named bruce both helped thank you so much i had pain in ass while recovering from this ❤
You're welcome please support here afterwards we're going to upload weekly videos stay tuned 🩵.
This worked thank you.
(hd0,1) needs to replace with your hard drive partition. it might be sound like (hd0, gpt2) etc. (hd0....) (hd1...) means your hard drives. Hope that helps in future. Don't be scared. Good luck. :)
You're welcome please support here afterwards we're going to upload weekly videos stay tuned 🩵.
This method is effective; however, ensure to locate the correct partition. For instance, in my case, the partition was in a different location (hd0,gpt1). So, be certain to identify the correct partition that contains the Efi folder.
thank you bro
Thank you so much bro, its work for me
And guys if try to (hd1,1) like video it doesn't work maybe, but you can find your root and try one to one (to find your EFI)
using command ls if you want to see your root
Ily
It is my life saver thank you
If "hd1,1" does not work try "hd1,gpt1"
Omg
I can’t thank you enough. I got a new ssd for my laptop. After migrating os and inserting the disk in, I stuck on this GRUB screen.
I googled for 3 days for solutions. There was a lot of good videos/advices (honestly I’ve learned a lot of new info lol). But nothing helped me.
Today I ran into this video. Short. To the point. Thank you very much!
PS. In my case I had to use hd0 instead on hd1.
Just in cases someone else get „hd1 doesn’t exist“ problem.
thank you man you're a lifesaver!!
Thank you, friend!! It worked!! But, what was written in the description like someone said, not the video.
THANK YOU!!! YOU ARE A LIFE SAVER
Stuck in Gru for so long.
Thanks it worked❤️
This worked🎉 best video straight to point no bs. Thanks bro
You're welcome please support here afterwards we're going to upload weekly videos stay tuned 🩵.
LIFESAVER, thank you my friend 🗿🍷
You're welcome!
The hero I never knew I needed in my life.
How did you put the equal sign please?
@@Elsinnombre1a Hi I just type it out like the video
You're welcome please support here afterwards we're going to upload weekly videos stay tuned 🩵.
DUDE, THANK YOU SO MUCH!
(Be sure to follow steps written in the description, the video ones didn’t work for me)
VOCE É UM DEUS CARALHO MERECE TUDO E MAIS UM POUCO
Esse bixu é uma lenda
Cês dois sabe como digita a barra pq no meu teclado n vai
Not working, got Window bootloader is missing or invalid, can you please help in this
Find part where EFI is
Thanks a lot man. You turned out the saviour 😅
thanks is working my pc ( hd0,1)
Thanks thanks thanks thanks thanks thanks thanks thanks thanks thanks...... Brother merko 8 ghante se baitha hua hun..........or Teri video aayi mere kaam..... Dhnyabaad bda bda aapka bhai ji 🔥🔥🌟🔥🔥🔥🌟...... 🌟🌟
I see mang tutorial, but I still don't understand why I can access Bios or boot menu when stuck here, although other can access this. Finally I get out by using command
It helped me big time! Thanks! Also if you have multiple hard drives it may not be (hd1,1) ... for me it was (hd2,1).
for me (hd0,1)
@@user-sf5mx1ib3eyou saved my life there 💕
OMG THANK YOU SO MUCH I HAVE BEEN LOOKING FOR A WAY TO FIX THIS FOR WEEKS!!
Is it worked?
@@ismoilxojaoloviddinov7846 yes it works
Please give permanent solution
It is coming every time
Sir it works but when restart again it happen .kindly fix this .
Great Job !
Thankyou so much ❣️
You got a new subscriber.
I want to thank you. You revived my dead laptop
You're welcome please support here afterwards we're going to upload weekly videos stay tuned 🩵.
Error :unknown filesystem
And error:file /efi .... Not found
No space
Man i swear you are the best on the earth
Thanks man ❤
Really appreciate it 🎉
You're welcome please support here afterwards we're going to upload weekly videos stay tuned 🩵.
It's say
You need to load kernel first
What I do
Man what the hell man you are genius you saved my day going back to windows with deleted partition hahaha thanks alot subbed !!
It's working but when I restart it came again. How can I get rid of it
Thank you so muchhh, i also have lenovo and tutorial worked for grub 2,06
You're welcome please support here afterwards we're going to upload weekly videos stay tuned 🩵.
At first it shown error the mentioned root directory didn't work for me , so listing the root folders and executing for each directory worked perfectly..
Thanks man
THANK YOU SO MUCH IT WAS EASY AND IT WORKED
But this again strikes whenever laptop reboots.How to remove this permanently?
Same here
Please help me if you solved id
Thanks bro...worked just perfectly
'/EFI/Microsoft/Boot/bootmgfw.efi not' found what to do??
Yep I have the same problem on a gen8 HP DL560 server - I’ve configured the logical drive from the ROM-based array setup utility, and trying to install windows server off a Ventoy 64gb USB, and it boots into this Grub mode and then can’t find this efi file. Stuck!
it always says error file i did all the steps
You are life savior❤
You're welcome!
Thanks man I rebooted to the windows...
Huge thumps up
You're welcome please support here afterwards we're going to upload weekly videos stay tuned 🩵.
Bro it says “invalid signature” someone please help me I have been trying to fix this all day
Thanks for solution ❤
MERECES EL CIELO SI ES QUE EXISTE. ME SALVASTE LUEGO DE HORAS DE FRUSTRACIÓN
This didn't really help me but I tryed using the command ls and try hp0,gpt1 to 12 in the second one it worked
Tysm
Its Saying Not Found. I checked the command so many times and i wrote it right. But its says not found
The same is here, what did you do?
Thanks man, really stucked for 2 hours!!!
Thanks bro you saved my money, really talks aren't your reward 🙏
Really Thankful to you🥺 you saved me!
Dewachikali iweh cheers ma guy
You save my life bro, new subscriber 🫡
You're welcome!
From KENYA, highly recommended video
Thanks dudeee ❤
It worked once but now its saying i need kernel
Did you solved that?
After completing the all commands it says "You need to load the kernal first" now what ?
you gotta find the linux image in your system. If that doesn't work do you still have the usb you used to install linux? Put that in and try reinstalling.
Also if you use arch (btw) run archinstall after boot to auto-install arch.
Thank you you saved me
It is saying you need to load kernel first. Pls help me.
Same here
Same
Wow it worked you’ve saved my life👍👍
Thanks dude. You saved my device😅
You're welcome please support here afterwards we're going to upload weekly videos stay tuned 🩵.
What if they say that EFI /microsoft/boot/bootmgfw.efi not fount
مع العلم اني كتبتها مثلك بالضبط
'exit' and click enter ,then choose Microsoft boot from the menu
this will boot you to Windows
later we have to change default boot method to windows via boot menu
Thank man
OH MY GOD MAN IF YOU WERE HERE I WOULD DEFINITELY GIVE YOU A KISS YOU HAVE NO IDEA HOW MUCH YOU SAVED!
I want to type this commad every time please help to fix
hello please help me about this. I try this also but not work
File not found for Insmod part_gpt
No such command: chian
grub4dos 0.4.6a 2018-11-05, root is (0x80,0)
The 4th command not working
THANKS MAN YOU HELPED ME A LOT
Sir.... thank you 3000
You're welcome please support here afterwards we're going to upload weekly videos stay tuned 🩵.
Thanks a lot man....ILY❤❤😭
You're welcome please support here afterwards we're going to upload weekly videos stay tuned 🩵.
Thank you are are life savers ❤
it's working!!! thank you very much sir
But it is coming every time is there permanent solution for this?
Y si es para linux?
After a Combination of videos..this worked for me
After following these steps i got this massage : /EndEntite
File path: /ACPI(a0341d0, 0) /PCI(0, e) /Sata(1, ffff, 0) /HD(1, 800,32000,3b98a43fae930c49, 2,2) /File(\efi\microsoft\boot) /file(bootmgfw.efi) /EndEntite
Help how to solve issue
I think something wrong with you disk path.
It said that the first,second,fourth command wasn't work. It says: "File not found"
Man plz reply hw to enter windows through gnu grub version 2.06
Thanks a lot, it worked for me :)
I found my windows partition, but /efi has no Microsoft. And there's no bootmgft.eft. what should i do?
Bro is a faking genius
Thank you man , you are true legend
DAMN!!!! ITS WORK...
thanks bro..
tysm may the lord bless you my friend I was doo stressed out 💗 tysm lord bless you you are a life saver I don't know how to thank you
you need to load kernel first
Plz reply
Same
Same
Thanks bro it helped me a lot
Ok, saved my ass as well. God bless you.
yep! worked, even put in the same partiton, the harddrive was different but it booted into windows
Its fixed but whenever i boot it's running again and again
Thanks, this fix my problem
Thank you bro... you are life saver ❤❤
Pls marry my daughter
Hola.buen videos ,ya lo intentado pero no me funciona,noseporque
En el comando :
Grub>chainloader /EFI/Microsoft/Boot/bootmgfe.efi
(no me funciona me sigue poniendo not found )
Aún lo puse bien puse Microsoft
Chainloader EFI/Microsoft
LO PUSE ASI Y AÚN ASÍ NO ME FUNCIONA .
Does it say something like „hd1 doesn’t exist“?
I get the same problem. “File … not found”. Doesn’t say anything about the hd/partition/filesystem - so I think i selected and set the right root hd/partition.
I was this close👌🏾 to giving up
Error can't find the command
You need to load kernel first.
Thnk u so much I literally trying for 4 hours but solved
Это было то, что мне помогло. Благодарю.
Excelent, ready!
Gracias Man, me salvaste la vida
I'm getting error when i typed the chainloader syntax.. also i got my Is as hd0,gpt2
Worked but on restarting, grub was back
Err
thanks bro, my is hd0,gpt1 👍