DIY DUAL HUB ELECTRIC SCOOTER WIRING NON-PARTNER UNMATCHED DIFFERENT CONTROLLER MR-100 SEALUP TF-100
HTML-код
- Опубликовано: 6 ноя 2022
- Need electric scooter spare parts in the Philippines? Check links below ⤵️⤵️⤵️
🧡 SHOPEE: shp.ee/6uq4b6t
💙 LAZADA: invol.co/cl74kpc
🤍 FB PAGE: www. mskgenmer/
RUSH ORDER? YES WE CAN DO!
Please contact us @ FB PAGE: www. mskgenmer/
📍 Pickup San Pedro Laguna
📍 Lalamove (Metro Manila and nearby cities)
Thank you! 👌🙏
TAGS: #mober #moberS10 #moberT10 #xtrack #panther #sealup #mobot #darknight #dd #ddva #dualtron #ecoride #inokim #kaabo #redline #rion #segway #tne #ucm #ultron #weped #xiaomi #m365 #xoom #xoomer #zero #evp #nami #maike #kuugo #lenovo #m2 #dyu #fiido #ecoride #romai #velicifero #kuickwheel #goboard #raze #genesis #viper #mijia #yume #eksph #electricscooter #tuovt #cst #donut #pleedo #owheels #moberX10 #S10 #S12 #T10 #X10 
Наука
I have another video using similar model of controller (NJAX-T) here > ruclips.net/video/SG7YQa6OUfY/видео.html
Please comment your questions / suggestions / feedback!!! Thanks to all!
I have two 72v 1500w controllers but my motors are 450w and 350w. Do both my motors have to be the same watts? Thanks for your help in advance 😊
best information video thank you
Most welcome :)
Good video, I have a jueshuai x750 need help with wiring everything can u help
can i put that controller in my urbanglide e-cross pro boost ?
My scooter has two motors , unfortunately one is not working at all my cod error is E07 and my voltage is exactly 52.8 v , is possible to exchange with another whill control that has 48V even the front whill has 52v ? Both(the new and the front one) have the same whats but different voltage
Hi i have inokim quick 3 48v but the battery is not working i wonder pls help me bcuz ii want to put the motor hub to my other scooter kugo also 48v my question is they have different controller is it okay ?
Muy bueno tu vídeo, me fue de mucha ayuda, gracias
Buenas dias senor
Thank you very much!
welcome po
Have you ever installed a throttle on a Yamaha pedal assist e-bike or any pedal assist e-bike made in Japan? Thanks for your time when you have time. 😅🙏
Hello, so the wires on my aftermarket controller only has the Green Black Red for throttle wires. But my QS S4 throttle has 6 wires: white, blue, red, green, black, and yellow. My problem is that I don't know what to connect the other 3 QS-S4 wires (white, Red, and blue) to because my aftermarket controller only has 3 throttle wire plug (Gr, Blk, Red). I do have a key ignition switch with volt meter display, which also has 3 wires (Gr, BLK and Red) jst plug. This was confusing me because the aftermarket controller does not have a three wire ignition key connection. I know that I need to modify this somehow. Could you please help? This controller is an aftermarket Kunray 48 to 72v 3000w controller and expensive. I don't want to return it, so i want to install it with help. I will be willing to pay you and venmo in U.S. currency or Zelle. Please consider helping me. Thanks
message me in fb page, thanks
can i ask if this method can be applied for inokim ox controller 60v 21ah to have one more motor in the front?
you need another controller and hub for front, controller must same as existing one.
Hi can you put a 1000w sinewave controller along side a generic 500w (kugoo m4) controller and run them both through a v889 sm connector display?
if the partner is the generic 500w and v889 throttle, then the 1000w will work on it, then should be fine, but I assume that the 1000w controller might only run on its 50% capacity, this is only my opinion as I have not done it personally
Is the orange cable on the second controller where the dual switch button is a positive wire?
yes right
is this the same method to follow for connecting dual motor with 2 YYK controllers?
I haven't tried specifically om YYK controllers, sorry not able to answer your question
hi, is it ok use two different controllers for an escooter ?
This is by chance. If they are compatible or not.
Should i modify my battery? Because my battery is 48V 21AH, current 25A, my single controller is 21A.. if i add another same specs motor and controller, should i have higher current? Please help..
your battery is 25A max, just nice for your controller, if you want to change the controller to 25A, that's absolutely fine
Sir tanung ko lng anung throtle ang pwedeng ipalit s zb-01 para sa t112 ko thanks
Dapat same lang. If wala ka mahanap, need to change both controller and throttle set, dapat kasi compatible.
Please can u do vidio for yyk controller 50A wiring diagram
I'd love to. However I only have 1 x 80A YKK controller here. I hope I can get another one.
hi po. request po sana ng tutorial vid kung paano gamitin ang yyk app for android at ios at kung anu ibig sabihin ng mga parameters na naka indicate doon. TIA!!
Yyk, malapit na ako magkaroon sir. Sige po 🙂
I am going to use 60v 1100 watt kaabo dual motors with kaabo controllers on ninebot mqx g30e ii..... i saw some RUclipsr use something called PCB box.... can you please explain it to me ,is it necessary or not?
you need to change the battery too. but in my opinion, placing a powerful controllers and motor in a entry level frame is not a good practice, Ninebot MQX G30e is designed for slow motor, I doubt it can withstand fast situation
ITS NOT SAFE AT ALL!!! My friend have ge30 ninebot and 10inc 850watt/1600wattt peak and bigger battery and controlers and it goes 55 to 60kmh and ITS nooooooot SAFE... It dont have any suspension and With this speed is very dangerous.... Its TOO MUCH FOR FRAME ...Just sayin
You maybe right.
Hey hey bro... already installed monorim suspensions and damper ... don't worry
My back already hurting me at the current speed without suspensions 🤣🤣
Am I right in thinking, if I did not want a on off switch for the seccond motor/ wanted it to just turn on with the other controller I’d just wire the two blue wires ( from both controllers) to the orange wire from the throttle?
I haven't finished the video but yes....also it could go the wires on the second controller that say something like "electric door lock" (so basically on/off , remote lock or unlock if you have a module, or whatever). The wise thing about his way is that this is now a very low voltage/low current switch. The other way would break the circuit at the controller and and probably more voltage rather than 1-4V which is at the throttle control....your preference. So 1)like in the video, no signal gets sent to the motor to spin, but the entire controller circuit is energized, 2)done how I described, the signal is sent to the controller, but the controller is not fully energized until the switch is flipped
@@Dlogreen i ended up just figuring out which wire powers it on and did a dual connector like that. Currently 20miles in now, through rain and sun and been working perfectly
Congrats on your project buddy!
You are right
Sir nagbbiuld b kayo ng battery Tesla or standar
yes sir
boss paano pag 5wires lang
One of my now former scooters as of last night has 2 controllers, one for each motor. None of them are labled and I couldn't get into contact with the manufacturer for over a year now. The battery ened up sending sparks and shorted out upon disconnecting it. I'm now selling the new motors i bought for it, in total ive spent around 2,600 on it.
Damn that’s unfortunate. You’ve metered the lines to check voltage from the battery cables? I’d start there maybe you just had a spark, that can happen when connecting and disconnecting. If there’s no voltage on the lines you might have just had a fuse blow on the bms for the battery. Some have a quick blow fuse that you can solder a new one in. I’ve had success with replacing a couple greenworks battery fuses before.
Very nice video dude I've found 3 wires that gives the signal for throttle how I do that now?
are you using the same type of controller?
@@mskgenmer yes same Typ now I found the 3 cables that gives me the throttle signal. Can u explain how to connect a switch button? I have to cut off the signal with the button but how?
Sir tong kung pde magsamahin un dlawangbkase ng ebike motor hub motor at un sa cargo motor?
pwede po sir, mas malakas yan
@@mskgenmer
May ebike kc ako un salikod is cargo motor tpos harapan lalagayn ko ng hub motor 1000watts un cargo motor ngaun ang ilalagay ko na hub motor 1000watts dinpde un dlawang controller pero iba un motor nila?pde kya pagsamahin un controller na un?
idol nagpalit kasi ako controller same lang din JP. kaya lang ung bago controller may BOX na error sa.LCD display ayaw mag run . pwede kaya hindi sila compatible?
Check wiring from throttle to controller. Baka nagkapalit yung communication. Or check din yung new controller if working talaga sya?
Boss tanong lang if ung mober x10 ko 1000W gawin kong dual Hub ung bago is 1200W with controller and throttle na compatible sa hub tapos ung 1000W hub ng mober ko gagawin kong 2nd hub na sya ano po sa tingin nyo?
Ung main hub is 48v 1200W na ksama ung orig na controller at throttle nya tapos 2nd hub kopo is 48V 1000W ung sa mismong mober ko galing and controller nya thanks in advance sir More Views 🫡
Better same all 🙂👍
Hello sir , I am working on a project consisting of dual motors , can I contact you ?
message me thank you
Idol pwede ba ang controller ng zero10x 60v sa 52v na 10x plan ko kc magpalit ng controller,salamat
pwede naman, gagana yan, kaso check mo yung battery, kung 52V battery nang 52V10X, meaning FC nun is 58.8, then pag ginamit mo yung 60V na controller, normally battery dapat non 60V na FC is 67.2V. so meaning, kaunting gamit mo palang maglowbatt ka na, magcutoff na BMS ng battery mo, or yung controller mo, normally 49V cutoff na rin yon.
@@mskgenmer salamat idol,hindi din pla ok kung ganon bibilis sya pero mabilis din malolobat,
Yes sir.
where can i buy the parallel throttle wire?
shopee lazada or can simply make it
Parallel throttle wire I need one. Where can I buy one??
Hi, check lazada or shopee. I just crimped mine. Bought wire and JST connector :)
Hello
My scooter is not working
I was driving it and it just turned off
I saw the voltage go down from 54 to 0 on the additional screen on my scooter I tried charging it and it only lets me use the scooter while it’s on the charger 🔌 and when I remove the charger the scooter dies
Can you please tell me what’s wrong with it
Or give me a solution??
Your battery pack is faulty. There maybe bad cells or your BMS is faulty. Get a tech to repair.
@@mskgenmer
I can’t find any repair guy who can fix it they keep recommending a new battery and it costs 115 dollars
@@abdelrahmanhassan8305 buy new or have yourself fix it :)
Good am bos pwede turuan mo ako sa scooter ko paano paganahin kaz naputol yung wire sa motor..bos
Ikabit lang ulit ng maayos, same color
I AM LOOKING FOR A VIDEO OF HOW TO CONNECT A NO HALL SENSOR MOTOR
if no hall sensor, just buy a controller with no hall sensor too, then the rest of the wirings are same
I HAVE A CONTROLLER WITH NO SENSORS 🇺🇸❤🛴
paano yan sir, pag nag break ka, ibig sabihin walang break sensor yung sa front motor?
Pwede mo rin iparallel yung brake sensor sa front controller.
Pde po magtanong
yes po
나는 6핀입니다 5핀말고 6핀버젼을 알려주세요
English please :)
@@mskgenmer I am 6 pin, please tell me the 6 pin version, not the 5 pin version
Buy a parallel throttle wire anywear
Wear
right