I built the Ultimate Switch OLED 😅
HTML-код
- Опубликовано: 19 июн 2024
- Nintendo Switch OLED on Amazon: austin.tech/switcholed
1TB SanDisk MicroSD on Amazon: austin.tech/1tbmicrosd
Clear Switch OLED & Joycon Shell on Amazon: austin.tech/clearoled
GuliKit Switch Joycon Hall Sensor Replacement on Amazon: austin.tech/halljoycon
Retroflag Switch Controller on Amazon: austin.tech/retroflagswitch
Retroflag Joycon Charger on Amazon: austin.tech/retroflagjoycon
mClassic HDMI Upscaler on Amazon: austin.tech/mclassic
Switch Gaming Station on Amazon: austin.tech/switchstation
By using our Amazon affiliate links we may receive compensation for purchases through those links.
Subscribe for more! / austinevans
TikTok: / austintechtips
Instagram: / austinnotduncan
Twitter: / austinnotduncan
Chapter Titles:
0:00 The Ultimate Switch OLED
0:50 Clear Switch Mod
1:37 Hall Sensor Joycons
2:52 Installing the Clear Shell
4:29 Clear Joycons
6:41 The "Ultimate" Switch Controller
8:09 This Was a Mistake
9:01 Nintendo Switch "Graphics Card"
11:10 Switch Gaming Station 
Наука
what a throwback to the old ultimates
i miss the old days
Fr
I loved those times
@@adamdageek nothing wrong with the newer time you guys just only think about the older times and never try to make fun now
I'm glad you covered the hall effect sticks! I've been using them ever since that company had their initial test batch a year ago. They've gotten a lot better and I personally can't stand using pot based sticks anymore. Nearing 800 hours without drift.
Woahhh, me happy that my 16$ controller isnt' drifting on 40 hours.
Would you say they’re in their most usable now? Highly considering buying them as my left joycon slowly starts to drift
@@Ali.F Absolutely! My controller from them (KingKong 2 pro) didn’t drift in over 800 hours. The switch lite replacement I did hasn’t drifted in over 100 compared to under 100 I used to get.
@@TimidSylveon i swear drift is either you get it or no
Nice effort, and the transitions are amazing. Truly a person that dedicates time to its job.
what probably happened to the joycon was that one of the 2 ribbon cables either shorted the board due to a bad connection or the cable got jammed. either way, it won't work if it's docked, but it SHOULD work if you can somehow power the joycon on wirelessly.
@@M4r10h it would help if nintendo didn't make the insides more fragile than a pringle, but after a bit of practice, u eventually get it right every time.. but my god have I broken a lot of joycons because of this. 😂😂
I had the same thing happen to my right joy on board. Whole joy on to shite bc Nintendo insists on making fragile components
As soon as he said he wasn't following instructions I knew he was going to brick that poor joycon.
B
I honestly thought this setup would be a lot jankier for April Fools 🤣
Ikr
It is 💀
the april fools joke of this video is the meaning of ultimate.
I did that same extreme rate shell swap. I did use the piece for the bottom that you chose to skip, it added like an hour to the time it took me to do it all due to how much you have to disassemble and it being my first ever shell swap. But the clear glacier blue color wound up looking great and all my buttons worked perfectly. Took me forever to do it but I'm happy I did. Also I swapped out the joycon slide locks for metal ones to prevent wear and keep them from breaking. I will eventually swap out the new 3d analogue joysticks I put in for the hall sensing ones tho. Good video guys.
Glad you mentioned the Mclassic again, been a long time since i've heard anyone talk about it. It still is a viable option for people who do not have nvidia 30 gpus to use vsr with.
I've had something very similar to that "ultimate Switch controller" for a few years now. It's by far the best way to play the Switch in handheld mode, if you're willing to tolerate the additional bulk.
"Switch 2 right around the corner"🤣🤣🤣💀
1 year later nintendo just announced a switch 2 in a tweet at 3 am 🤣🤣
I just love Matt’s and Ken’s commentary
I get Gulikit hall effect that was awesome. So, a few better accessories first: hori split pad compact /pro . 2nd: 8bitdo ultimate controller. 3rd: Buying the Mcable, not the dongle , is so much better, and finally, a neio grip I think 🤔
True, screwing while it's soft is challenging. Nice that that included a solid replacement ;) !
Oh my god! is that an ultimate system video where he actually builds the ultimate version of a system?
Took my oled apart for the extreme rate case. No experience butt took me a couple days being realll gentle. Love the turn out of it
i loved the clear switch mod and the joy cons.
This is so EPIC Austin!
Actually just installed the atomic purple version of the Extremerate shell last week. Getting the bottom piece switched out took a solid couple hours but it definitely looks better with it.
Finally! 🎉! Been waiting since I got mine! 😂 this is why I wait for Austin first 👑
Finally broooo there hasn’t been an ULTIMATE episode in forever austin😂😂!!
Yes no on to the port of a PCs I am looking at you AYN ann Ayaneo
We need the ultimate sega Saturn
That actually turned out pretty darn sick bro!
Austin is like the kid presenting a class project while also trying to sound professional and holding the urge to not join the laughter that ken and matt started lol
“What’s the biggest problem with the joycons” ‘they’re too small’ “what’s the second biggest problem” this killed me😭
Did the atomic purple oled switch myself a day ago. I love the way it turned out
the official OLED kickstand is made of metal (some sort of magnesium alloy). That's how it's able to be strong and also low profile.
6:23 and that, my friends, is why when you're disassembling complex small electronics you make sure to do it slowly and delicately.
I think if there is a next gen switch it should share the joycon attachments and should include new joycons with no drift and so that you can use your old switch accessories
This was the Austin we all missed
Love the content Austin, keep it up.
You guys are hilarious! I love this channel!
This is the most off the rails Austin Evans video I've seen
Good ole Austin Turing two joycons into one joycon with a new shell
RUclipsr’s ultimate is a synonym for “make it as impractical as possible”
What train game are they playing at the end???
I WAS WAITING FOR THIS!!!!!!
I really like these vids pls continue to post them
The old Steve damage taken sound effect hit me with too much nostalgia
I'd argue NSO is way better now especially with a family plan. GBA and GB games are emulating the best they ever have.
What a legendary trainwreck of a video. I love it.
this team is a lot of fun
Great vid Austin
I bought an mClassic a while back and it's great for use with the docked Switch. Just keep in mind that it will only upscale by one step. That means it takes 720p and makes it 1080p, it will take 1080p and make it 1440p, and take 1440p and make it 4K. The higher the input resolution the better the upscaled image looks.
Are you able to get 1440p working on the Switch with a 4k TV? My TV (TCL 646) supports 1440p but the Switch will only do 1080p with my mClassic. I've read something about it being because the Switch outputs 1080p/60hz and the mClassic will only upscale to 1440p if the input is 1080p/30hz. I saw something about needing a frame rate limiter or something but never looked into it further.
I can still notice a difference in the the jagged edges when flipping the mClassic off and on but I'd really like to see it at 1440p.
@@l_burn Only some games are even capable of 1080p @ 30/60FPS output in docked mode, and most of those just use a dynamic resolution setting that drops back to 720p when the FPS drops below 30/60. If the mClassic sees the source drop to 720p it will default to upscaling 1080p until you restart the input source. Because of this I just force 720p output in the settings to maintain 60 FPS.
@@TheZoenGaming awesome info, thank you. I'll have to switch between a few games and see if any of them actually hit 1440p, I only really tested it with BotW. I've actually had it for a year or so and left it on because, even without 1440p, there's a recognizable improvement to lines/edges. Also seems to make colors a little more vibrant on my TV.
@@l_burn According to reddit, a few games are locked in to 1080p in docked mode, but people have reported that their FPS is wonky as heck and never stable.
Just remember that for the Switch you want the green light lit up on the mClassic slider.
@@l_burn If 4K is really important to you, you can try adding the 4K Gamer Pro to the mClassic. It's supposed to take any 1080p source and upscale it straight to 4K.
POV: when Austin’s instructions for replacing the joy stick is 1hr long LOL😂😂😂😂😂😂
Pretty funny this came out about 2 weeks after I put that same clear shell on my switch and joy con with the same hall sensor joysticks
Problem is with some of the physical games for the switch is they only put some of the game on the cartridge and you have to download the rest. So some physical games will be useless in the future too if need to download them when the servers are gone.
Now all u need to do is hard mode this baby and u really have every game on ur fingertips + homebrew!
That's why when I did my joycons (boxypixel shells), I tested the buttons before I screwed it back together.
I love the episodes with a Lollipop with two stick hands touching technology telling me how stupid I am. I love it. I’m not even kidding. It’s great 😂
I love my switch! Can't wait for the new one!
In the year of our lord 2023, I am listening to technocumbias on a switch mod video. Thank you to the editors.
Why do you have a picture with an extra side screen on the picture of the video come on? That’s why I watched it stuff like this. This is why I’m subscribing fake.
random ass chicano music during the joystick switch killed me
would the mclassic work for steam deck when docked?
Its crazy how much storage you can fit in such a small form factor nowadays.
Right I got a terabyte for my oled
This is what building the ultimate console is. Unlike another company that sells old games/consoles.
What’s the little screen besides the main switch screen in this video’s cover?
11:45 imagine bringing this on a plane 😂
3:54
im at minute 1. but since you dont want to buy Eshop games you can "dump" ur cartridge games into the 1Tera sd card and the cartride its :read ony: so its not gonna damage it.
The games won’t disappear though. You can even copy the micro SD card to your computer or copy it over multiple times across multiple cards to save your digital games after the shop shuts down. But also it’s Nintendo, most Nintendo games retain their value so you’re better off buying them physically.
This video was a fun dumpster fire kinda ultimate experience and the “Swtich” gave it away 😂
Im new to tech could you tell me your screwdriver set.I want to do something like this but I don't have the money or the tools.
Bro made the ultimate switch even more ultimate
"I DID A THING! I DID A THING!" - Austin Evans
What's the game they'er playing at the end?
My joycons are charging whatever shall I do, charge them on your switch XD
Can you do a video for a pc build for sim gamers and vr gamers. I’m about to build my first pc but don’t have a clue what I do and don’t need and don’t want to overspend on performance if it’s going to be wasted on me
Before I watch the video you got me with the WW on it.
...You should get another one of those upscalers...And plug it into the upscaler so you can have like 420k resolution.
"With the Switch 2 right around the corner"
*citation needed
Man, didn'T know that Nintendo had a Console called the "Swtich". Awesome!
Plenbo g-case would be perfect for this.
Normal joycon: drifts, but it works.
Ultimate joycon: doesn't drift, doesn't work 💀
april fools
I have forgotten this day, now I feel dumb
Fool me once shame on me, fool me twice subscribe to THIS IS, 😅
Right back at ya, Switch still selling pretty good no switch 2 around the corner friendo
abril tools
Thanks wont watch
to sum it up, he switched the joycon and switch shell, the rest was just accessories and a SD card.
the trick to preventing joycon drift is to decide that joycons are too damn small and then only ever use them for fitness boxing.
They missed the chance to check out the nyxi game pad controller 😢
You can try Gulikit KingKong 2 Pro controller. It is a great controller too!
"with a switch 2 right around the corner"
Sure Austin, whatever you say 😂
Plural JoyCon is still JoyCon 😉
Thnx for the amazing video, love the struggle bus
Add the homebrew modchip to the switch please so it can be modded.
Personally, I think every Austin video is an April Fools joke.
7:35 is what the average Switch owner sounds like. :^)
This was my first video from you. I was semi focused on something else, but by the end my brain went "what the fuck did I just watch‽" So glad it was April Fools. 😂🤣
I am fixing joycons for a while at this point and that video was kinda painful to watch 🤣
You should honestly get all your "ultimate" console builds and put them behind you in the background
This is the first time that I leave a comment on one of your videos, but I wonder if you could explain why a Switch would constantly have the games corrupting so often?
can't wait for the ULTIMATE STEAM DECK BUILD!!
I forgot April fools and I couldn’t prank anyone.
Now I’m sad.
The horrible memories of missing it this year….
It sends me in tears.
Let's upgrade: ( *brings up 3 joy cons 1 controller* ) !
I'm glad to hear I'm not the only one who has no trust in the system, for the future usability lol 😅
I was expecting him to extend the screen using the joycon slot like in the icon now I'm sad
I can repair a Nintendo Switch JoyCon in under 45 minutes, and yes that also includes adding a new battery to them and such
"I don't trust you to open a jar of pickles right now"
5:00 nice background theme.
1:28 that got me 😂
Yo Austin, can you make a video about a ultimate new 3ds xl
Yeah I almost bought one of those clear shell kits… then I saw the instructions. Decided nah I’m good.
Ngl the only thing that would fuck me up is that using a white transparent cover will get yellowed. i know there is probably other coloured covers but it would fuck me up so much too
It cool that ur job is to play with toys and tech
Whoever had the Latin music in background, keep it up!😂
How meny graphics cards can you stack for that switch. asking for a friend.