How To Remove Plastic Push Rivets On Your Car
HTML-код
- Опубликовано: 28 янв 2022
- This specialty tool is cheap and will save you from breaking your plastic rivets
This is the link to the local store where I bought this: brantfordsurplus.com/products...
Amazon also Carries these
#diyautorepair 
Авто/Мото
Never underestimate the value of clear and concise instructions. Thank you.
You are welcome. Thanks for the great feedback. Please like and subscribe
Done this meany times before but ended up getting stoned before hand and completely forgot. Cheers dude.
All good. Thanks for watching. Please like and subscribe
Nicely done, precise and to the point! good job!
Glad it was helpful! Thanks for watching. Please like and subscribe
Oh nice the key is to put it in between that slot I had that tool and I was just putting it underneath it. Making it break. Saw your video and show you need to put it inside that gap. Thanks
No worries. I’m glad the video helped. To replace your broken ones Amazon has boxes of them for cheap if you are looking. Thanks for watching. Please like and subscribe
Nice and clear showing both tools. Thanks for explaining the advantage of the specialty tool even though it looks like a little more effort to snug it into the slot. It's clear why the specialty tool places less stress on the clip by not having a single pressure point.
You’re very welcome. And thanks for your feedback. I definitely try to use the cheapest or simplest tools but sometimes a specialty tool is required. I’ve also used this tool to pop many panels off the car, and also pop out some tight sensors. Very handy. Thanks for watching. Please like and subscribe
The battery, for a Chrysler Dodge Journey, is located inside the driver side wheel well. I broke 2 of those fasteners trying to remove the wheel well liner. Went to the Chrysler dealership to purchase replacements. Two small plastic clips cost me, with tax, just over $10.00.
So, my advice is put your money towards the purchase of the tool. You will always have it for future clip replacement.
Agreed. And you can buy replacement clips on Amazon or from most hardware stores for half the cost. Thanks for sharing. Please like and subscribe
Great direct-to-the-point video!
Glad you enjoyed it! Thanks for watching. Please like and subscribe
Thank you for this video, very clear instructions and easy to follow
Glad it was helpful! Thanks for watching. Please like and subscribe
Super helpful. Thank you!
You’re welcome. Thanks for watching. Please like and subscribe
Thanks for the tips! Make more!
Always posting more content. Any specific ideas you have in mind? Thanks for watching. Please like and subscribe
Thanks. Those clips come in various configurations. Not all of them have a slot to help with the removal. In that instance using two screwdrivers will facilitate easier removal. A properly sized removal tool is the best way to go to protect the integrity of the clips regardless of the type of clip.
Yes and there are also Philips head plastic fasteners. My vehicle only has these. That’s why I only showed them. Thanks for watching. Please like and subscribe
Thank you. Very helpful.
Glad it was helpful. Thanks for watching. Please like and subscribe
That's what I figured but I felt it best to confirm before I start snapping things!
Cheers.
Glad it helped. Always best to check. Thanks for watching. Please like and subscribe.
Ez-Pzy. The exact info I needed. Thank you!
No problem! Thanks for watching. Please like and subscribe
Great tip, thanks!
You’re welcome. Thanks for watching. Please like and subscribe
Thanks was about to yank it out but thought there must be a correct way to remove these without damaging the rivet
I’m glad you found my video first. Thanks for watching. Please like and subscribe
was wondering why this tool if flat head scew does the same. now i know why. thanks for that!
You’re welcome. Thanks for watching. Please like and subscribe
Thanks a lot!
You’re welcome. Thanks for watching. Please like and subscribe
Thank you!
You're welcome! Thanks for watching. Please like and subscribe
Thank you
You’re welcome. Thanks for watching. Please like and subscribe
Best video
Awesome. Thanks for the feedback. Please like and subscribe
excellent
Many many thanks. Glad you enjoyed. Please like and subscribe
Hmmm, you made the screwdriver look easier.
Because I got really good at using it before I bought this tool lol. Different people may prefer a different tool. Thanks for watching. Please like and subscribe
I watched actually for how to put it back properly since I broke two putting them back in the wrong way. The whole video was great though.
Thanks for watching. Glad it helped. Please like and subscribe
What size rivet do I need for a .25" hole? 🤔
I sense sarcasm lol but it’s hard to tell in a comment section. Thanks for watching. Please like and subscribe
6 mm is .24 inches, which is very close.
How do you remove small ones? I used a smaller flathead screwdriver but it just damages the rivet
Amazon has panel popper tools like this one but with a smaller opening for small rivets. Thanks for watching. Hope this helps. Please like and subscribe
How come it's not as easy on my 20 year old truck😂
These plastic clips get filled up with dirt depending on the location. 20 years of weather will make any fastener harder to remove. This video was filmed when my car was only 4 years old. Thanks for watching. Please like and subscribe
It’s never that easy with a flathead, get the pry tool !
The pry tool is definitely easiest. Thanks for watching. Please like and subscribe
I wreck these dam things all the time
Yes these are a nuisance. Too soft in summer. Brittle in winter. Even with the tool sometimes they won’t budge. Either way hopefully you found the video helpful or at least interesting. Please like and subscribe
@BillOfAllTrades2016 I did I had 1 out of 50 come out nice lol. So I have 200 replacements coming in the mail. Gotta love Amazon
i used a fork.
Strange choice but if it works… sure
There is something really cheap about car manufacturers using these things! For the money paid they could do better!
Agreed. But there is no going back now. Just gotta get the right tool and keep doing diy to prevent them from taking our hard earned money. Thanks for watching. Please like and subscribe
Will do. !Thanks!@@BillOfAllTrades2016
You’re welcome.
Thank you!
You're welcome! Thanks for watching. Please like and subscribe