Thank you!!! I dropped my friend’s card and I looked for it for hours! Even tore off some skin on my hands trying to look up under the seats and force my hands into the small places. Finally realized that there was a crack and it fell in there, so I came to RUclips and here you are! You’re a life saver 💜
I had dropped a souvenir poker chip I wanted out of there. Took longer to watch the video than to do the work. None of the others I saw got to the point as quick as this did
Thank you so much! I dropped my single key right by the E brake into the console you saved me so much money and time with this video!! Thank you so much!!
I dropped a vital key that I did not have a copy of into the slot by the emergency brake. No idea how to get it. Found your instructions and retrieved it easily. Thank you so much, you saved the day!
Do you have a video on how to replace the emergency brake button in the 2009 Ford fusion. Mine broke, the plastic cracked so it won't screw on again and the spring keeps popping it out. Thank you.
I have to retrieve a driver's license that has fallen in the gap between the left side of the hand brake and the center console wall. Will I have to go through the entire removal process or can I just undo the four 7mm screws to get more wiggle room?
You'll be able to lift it up quite a bit with just taking the 4-7 mmmm screws out and then maybe the Chrome bezel around the shifter but you probably don't even have to do that
What size are of screws to take of big part bro you say is 7 mm and 8 mm Are the screws 7 mm and 8 mm or is it the head of the screws? Help I need to buy screws 😊
Great job guy, I appreciate it. I have a manual with a sticky shifter. I need to know if I can get inside the box under the console and service it? The parts actually attached to the trans move free, cables and all. EDIT: Got it done, thanks to you. The first two center pieces came out just the same as the auto you showed. Lubed what needed and we're good to go. Thanks Again.
Yeah once you get the center console off you can pull the shifter cable off of the ball it just pops off and then there's 4 x 13 mm nuts that hold the shift assembly down and then you have maybe one or two electrical connectors that's it and then you can pull that whole Center shift mechanism out of there and then the cable just lays there until you pop it back on
God bless you bro great job really... but when I tried to but it back i... there was a peace of metal like a washer! (my English not that good sorry) it's comes between the two rear screws idw how... im stuck there sir!
I’m having trouble with finding out how to remove the stupid clip that took you two seconds to do. The one that goes to the charging port in the console. 😭 I’m struggling
This is gunna help me with replacing the handbrake assembly on my 07, wouldn't happen to have any how-to information on how to swap out that entire assembly would ya?
Hi. Mine has a screw on the side of the console at drivers seat. It’s fairly close to the ground. I didn’t see where u had to remove it? Mines a 2011 and squeaky like crazy so I’m trying to figure it out. Just got the car. It’s about 1-2inches from floor board
Hey I have a little blue wire that come lose while I was cleaning the gear shift it’s by the charger port and there are two holes the blue wire could go…… some help would be very appreciated
Just curious could this be turned into a column shift with a bench seat like the older Tauruses this car replaced? Looks of this id say yeah but wasn't sure LOL
I just need the first half of the video my credit card slid right next to my parking brake ugh... Thx for the video going to try when I get home
Amazing video. Took approximately 5 minutes to do what stubbornly took me 1 hour to do😂
Thanks for the video. Saved many hours of headaches and broken plastics.
Thank you!!! I dropped my friend’s card and I looked for it for hours! Even tore off some skin on my hands trying to look up under the seats and force my hands into the small places. Finally realized that there was a crack and it fell in there, so I came to RUclips and here you are! You’re a life saver 💜
That's what I do I'm glad you got it
I had dropped a souvenir poker chip I wanted out of there. Took longer to watch the video than to do the work. None of the others I saw got to the point as quick as this did
2.7k views and this video is highly underliked. I followed along step by step and got it done, exactly how he did it.
Maybe I should re-upload it?
Heck, do it with tabs maybe? Seems like a lot of us just need access to retrieve items. I know I have seen tabbed videos before. Thanks for this one.
Great video! Excellent commentary.
Thank you so much! I dropped my single key right by the E brake into the console you saved me so much money and time with this video!! Thank you so much!!
I dropped a vital key that I did not have a copy of into the slot by the emergency brake. No idea how to get it. Found your instructions and retrieved it easily. Thank you so much, you saved the day!
Make sure you subscribe to the channel please it helps me out
Hell yeah.. now I can change my shift indicator buld... thanks man
Great video, now I can clean my car in detail
Thank you so much good sir. This helped my brother clean his car properly
Do you have a video on how to replace the emergency brake button in the 2009 Ford fusion. Mine broke, the plastic cracked so it won't screw on again and the spring keeps popping it out. Thank you.
I'm installing a USB outlet for the rear passangers and need to drill and run wires to it. Thanks for sharing!!!
It's been awhile, where you been?
I have to retrieve a driver's license that has fallen in the gap between the left side of the hand brake and the center console wall. Will I have to go through the entire removal process or can I just undo the four 7mm screws to get more wiggle room?
You'll be able to lift it up quite a bit with just taking the 4-7 mmmm screws out and then maybe the Chrome bezel around the shifter but you probably don't even have to do that
What size are of screws to take of big part bro you say is 7 mm and 8 mm Are the screws 7 mm and 8 mm or is it the head of the screws? Help I need to buy screws 😊
Would you happen to know if the carpet from the 10-12 fusion would fit in the 06-09 ??
Someone sharted in the drivers seat for sure.
Great job guy, I appreciate it.
I have a manual with a sticky shifter.
I need to know if I can get inside the box under the console and service it?
The parts actually attached to the trans move free, cables and all.
EDIT: Got it done, thanks to you.
The first two center pieces came out just the same as the auto you showed.
Lubed what needed and we're good to go.
Thanks Again.
Yeah once you get the center console off you can pull the shifter cable off of the ball it just pops off and then there's 4 x 13 mm nuts that hold the shift assembly down and then you have maybe one or two electrical connectors that's it and then you can pull that whole Center shift mechanism out of there and then the cable just lays there until you pop it back on
Thank you much appreciation.
not a problem
Have you done a video on removing or replacing the center dash compartment?
Thanks, in replacing the e-brake cable, guessing this console would have to b e removed - ? would like to see how the e-brake cable is done.
Yes the center console has to be removed for that and I don't have a video on the E brake cable
Should be self explanatory when you get the cable off, let me know when you get there if it's to hard and I'll try and make time and look it up
Poissorichard.rp@gmail.com
@@FordBossMe Thanks so much, not sure when i will get to it.. have my daughters cars to work on first...
God bless you bro great job really... but when I tried to but it back i... there was a peace of metal like a washer! (my English not that good sorry) it's comes between the two rear screws idw how... im stuck there sir!
Ahhh the screw clip
Sometimes it falls down under the carpet and it's gone lol and it won't return without pulling the carpet
amzn.to/2ZZj7mw
I’m having trouble with finding out how to remove the stupid clip that took you two seconds to do. The one that goes to the charging port in the console. 😭 I’m struggling
Thank you sir! 🧐
This is gunna help me with replacing the handbrake assembly on my 07, wouldn't happen to have any how-to information on how to swap out that entire assembly would ya?
Never done a hand brake but shouldn't be that hard
Hi. Mine has a screw on the side of the console at drivers seat. It’s fairly close to the ground. I didn’t see where u had to remove it? Mines a 2011 and squeaky like crazy so I’m trying to figure it out. Just got the car. It’s about 1-2inches from floor board
Never mind I must of not been at beginning of video. Thank u
Yes it was in the video you missed it take it out if you need any further help email me
Poissorichard.rp@gmail.com
Is just the top lid part a pain to take apart?
I don't know that I have ever done that
Will I be able to adjust the handbrake tension with the center console removed?
I d9nt remember, I thought the tension adjust was underneath the car
Hey I have a little blue wire that come lose while I was cleaning the gear shift it’s by the charger port and there are two holes the blue wire could go…… some help would be very appreciated
Email me a pic poissorichard.rp@gmail.com
Thank You!
I guess my car can have them half blunts
Are those crack rocks in the change tray
Idk
Do you have a video on how to replace the center console lid on a 2015 Fusion? Would I need to remove the whole console to replace just the lid?
Email me and remind me I'll make it for you before I get off work today
Poissorichard.rp@gmail.com
Just curious could this be turned into a column shift with a bench seat like the older Tauruses this car replaced? Looks of this id say yeah but wasn't sure LOL
My center console in my 2011 squeaks real bad. If I remove the console, any suggestions on how to fix the squeak before I re-assemble?
No really you'll see if something isn't right
Hut me up if you need further help
@@FordBossMe Thanks!
Will this work on an ‘06?
Same concept
Still having a very hard time disconnecting the cigarette lighter connector in console. Very hard...
Yeah it's sometimes it is a pain in the butt
@@FordBossMe got it tho. Thank you for the info.
@@sullyman7097 how’d you get it? I’ve tried squeezing it together and everything and cannot seem to get it out
If you can control yourself 😂
Why make me listen to the chime.
Because that's just how it is