Sorry it took me so long. Unfortunately I don't have a video of this, it would have been a good idea to show the install part. I'll have to remember that if I ever do a video again!
I was breaking my head wondering how you managed to get it out with just one hand and i was struggling getting out with two until I noticed my parking brake handle was not all the way up lol Thanks
I wish I would have kept filming, but it was getting difficult trying to do everything one handed. In my situation, just removing the bulb and replacing it wasn't enough. I ended up doing some rewiring to another fuse to have it come on. Not sure if this is your situation though.
@@arichester846 I actually finally got to the bulb from underneath, replaced it , and had a happy ending but your first part was helpful so thanks a million.
I'm not sure, I didn't have the need to go that far. From experience with other cars, there are usually small setscrews at the base of the knob that need to be loosened and the knob can slide straight up. There might a plastic ring around the base that has to be slid down to expose the screws. Hopefully that helps some!
I accidentally spilled a vitamin water onto my console & it went down around the gear shift. My question is, could the spill possibly damage the components (I have the model w/ accent lights)? Should I remove the console & wipe it out?
Butterfly Angel, I'm sorry I didn't get back with you sooner. I don't think you've caused any damage. By now if you're not seeing anything wrong, I would say you are in the clear. You might take all of it apart and try to clean up any residual mess. Just to get rid of any stickiness caused by the vitamin water. If you do this, obviously look to see if anything looks damaged, but other then that I think you're good.
There is no way on God's green earth that boot over that ebrake wasn't already off when this was filmed. I reached a complete impass trying to get that off, broke the tabs that claim to hold it on to the panel, and the boot still would not come off and I couldn't unplug the accent light wire with the boot in the way.
True, since I was trying to film and show the procedure with one hand I went ahead and got the ebrake boot loose beforehand. It was definitely a pain, but I was able to get it loose.
I remember it being kind of a pain to remove. Lol. What I did was loosen the entire console first and stuck hand underneath to pry the tab loose. You'll need to pry the tab inwards towards the emergency brake. I pried the tab and pulled on the top of the boot with my other hand at the same time and it finally broke free. Once you get one side of the boot out you will be able to pop it out of the console. You could try using the trim tools like I showed in the video and try to slide it under the plastic edge of the boot and pry up. (I'm not sure if it will work or not as I didn't try that)
C the G, that whole panel might pop off if you use trim tools around it. But I've never personally removed it before. So I'm not entirely sure. Have you tried looking at other videos to see about removal?
Are you trying to access the bulb that lights up which gear you're in? If so, I didn't have to remove the shift knob to do so. You just need to do everything I showed in the video, and then remove the black bezel trim piece I pointed to at the end of the video. Once that's out of the way you should see where the bulb is located. If I remember right, you have to twist the bulb housing to remove it. I can't fully remember since this almost 4 years ago.
I'm not sure, I didn't have the need to take it off. From my experience with other cars, I would imagine that around the lower part of the shift knob, there should be small screws holding it in place. I think there is a plastic cover towards the base of the knob that has to be pryed downward to expose the screws.
Mostly helpful. Installed a radio in my 2011 Ford focus. Wondering what that plug at the top right of the shifter assembly is, mine was unplugged? Didn't have a cable to plug into it either, wasn't one hanging there... Any ideas what that plug is for? Anybody?
Kyle, sorry I didn't see this when you posted. Unfortunately I don't know what that plug is for. Assuming you have the same model in the video, I would check and see if all of your ambient lights are on, cigarette lighter works, etc. The plug might control some of those item.
I purchased my kit off of eBay. They're pretty cheap online. I would say autozone, advanced auto or other local parts store... Any of those places should carry them, but I don't know for sure though.
I'm replacing the shift indicator light for my teenage new driver. Thanks for the vid sir
You're welcome, glad I could help!
Thanks for sharing. Needed to get under my console to check the ambient lighting harness. I found it easier to start from the front though.
This video helped me a lot today. Thank you.
Awesome! Glad it helped out!
Could you post a video or give advice on reinstalling the center console? Having trouble with that part. Thanks!
Sorry it took me so long. Unfortunately I don't have a video of this, it would have been a good idea to show the install part. I'll have to remember that if I ever do a video again!
I was breaking my head wondering how you managed to get it out with just one hand and i was struggling getting out with two until I noticed my parking brake handle was not all the way up lol Thanks
You're welcome! I found out the hard way too prior to making this video. Lol
Great on opening the console but really needed to know the trick to replace the gear shift light.
I wish I would have kept filming, but it was getting difficult trying to do everything one handed. In my situation, just removing the bulb and replacing it wasn't enough. I ended up doing some rewiring to another fuse to have it come on. Not sure if this is your situation though.
@@arichester846 I actually finally got to the bulb from underneath, replaced it , and had a happy ending but your first part was helpful so thanks a million.
@@johnwallacemcclure1143 That's great, glad you managed to get it fixed! Glad I could help!
Thank you! Just managed to find like $30 worth of change in this car I bought from someone else 😂😂😂😂😂😂
Haha, that's great! Glad I could be of assistance. 😆
Great video thanks!
You're welcome!
Thank you for this!
You're welcome!
How do you remove the shift lever to put an aftermarket one on ? 2011 ford focus se 4 cy.....thanks in advance
I'm not sure, I didn't have the need to go that far. From experience with other cars, there are usually small setscrews at the base of the knob that need to be loosened and the knob can slide straight up. There might a plastic ring around the base that has to be slid down to expose the screws. Hopefully that helps some!
I’m looking for it as well it’s really irritating
Did you end up figuring it out? I’m trying to do the same thing as well
So who was successful….. this is my current situation
Anyone got it ?
I appreciate this, thanks!
You're welcome, glad it was helpful!
Does ANYONE know how to replace the shift knob !?!??
I accidentally spilled a vitamin water onto my console & it went down around the gear shift. My question is, could the spill possibly damage the components (I have the model w/ accent lights)? Should I remove the console & wipe it out?
Butterfly Angel, I'm sorry I didn't get back with you sooner. I don't think you've caused any damage. By now if you're not seeing anything wrong, I would say you are in the clear. You might take all of it apart and try to clean up any residual mess. Just to get rid of any stickiness caused by the vitamin water. If you do this, obviously look to see if anything looks damaged, but other then that I think you're good.
There is no way on God's green earth that boot over that ebrake wasn't already off when this was filmed. I reached a complete impass trying to get that off, broke the tabs that claim to hold it on to the panel, and the boot still would not come off and I couldn't unplug the accent light wire with the boot in the way.
True, since I was trying to film and show the procedure with one hand I went ahead and got the ebrake boot loose beforehand. It was definitely a pain, but I was able to get it loose.
How tf did you get that black tab out of the boot lol
I remember it being kind of a pain to remove. Lol. What I did was loosen the entire console first and stuck hand underneath to pry the tab loose. You'll need to pry the tab inwards towards the emergency brake. I pried the tab and pulled on the top of the boot with my other hand at the same time and it finally broke free. Once you get one side of the boot out you will be able to pop it out of the console. You could try using the trim tools like I showed in the video and try to slide it under the plastic edge of the boot and pry up. (I'm not sure if it will work or not as I didn't try that)
I'm gonna paint that part but i want to do the silver part on the dash around the volume knob, does it remove the same way?
C the G, that whole panel might pop off if you use trim tools around it. But I've never personally removed it before. So I'm not entirely sure. Have you tried looking at other videos to see about removal?
Yup, thats exactly what i did and it seems pretty easy, gonna give it a go tommorw and see how it turns out. Thanks for replying 🖒🖒
@@CtheG420 Awesome, glad you found how to get it off. Best of luck during removal!
You don’t have to paint it. They make wraps different colors. Just remove it trace it cut it out and put it on
@@tommytec7607 ohh shit, I'm gonna do that to my new car. Thanks for telling me about that stuff, I had no idea!
How to pull the handle of the shifter to change the bulb . I tried it and there is no access unless you pull the shifter hansle !!!!
Are you trying to access the bulb that lights up which gear you're in? If so, I didn't have to remove the shift knob to do so. You just need to do everything I showed in the video, and then remove the black bezel trim piece I pointed to at the end of the video. Once that's out of the way you should see where the bulb is located. If I remember right, you have to twist the bulb housing to remove it. I can't fully remember since this almost 4 years ago.
How do I take off the shift knob to replace it with a different one ?
I'm not sure, I didn't have the need to take it off. From my experience with other cars, I would imagine that around the lower part of the shift knob, there should be small screws holding it in place. I think there is a plastic cover towards the base of the knob that has to be pryed downward to expose the screws.
I’m looking for it as well
Thanks brooo
how the hell did you get it off so easily. i’m struggling so badly lol
Lol, I prepped before filming. What you're seeing is after I struggled myself to get it all off. 🤣 What part is hanging you up?
Mostly helpful. Installed a radio in my 2011 Ford focus. Wondering what that plug at the top right of the shifter assembly is, mine was unplugged? Didn't have a cable to plug into it either, wasn't one hanging there... Any ideas what that plug is for? Anybody?
Kyle, sorry I didn't see this when you posted. Unfortunately I don't know what that plug is for. Assuming you have the same model in the video, I would check and see if all of your ambient lights are on, cigarette lighter works, etc. The plug might control some of those item.
What auto store can I get one of those panel removers?
I purchased my kit off of eBay. They're pretty cheap online. I would say autozone, advanced auto or other local parts store... Any of those places should carry them, but I don't know for sure though.
Great video!!!!
Thanks! I'm glad you liked it.