Wjat if the batterie already blinks in a blue light even if i plug the battery off woth the power cable? My scooter turns on amd off from.itself or turn on and off the lights. Sometimes it doesnt work right with the power button.
@@Adrenalinmanijaci Easy if you're MacGyver, if u have all those 100 necessary tools then i guess it'll be easy, all i have is the electric screwdriver lol
Mine is green and when I do the bypass method where you put the wire in the black and does blue red and then it goes to red but the charger's green after a while
I have one where the red light flashes 3 times when the charger is plugged in, then nothing... Could this be a similar fault? The battery is showing a very low voltage on a multimeter too. Cheers!
I left my m365 unuse over a year n now not charging. I open the case, and there is no red or blue led. But upon plugin charger, it flashed red 4 times. Check BMS voltage output is 18.40v, but the battery before BMS is 36v. What can be wrong? Is the BMS board faulty after unuse for too long ? Update: problem fixed by replacing the BMS board. Blinking blue again n able to turn on.
There is a youtube video on how to replace the m365 scooter bms board n link to buy the board. Note: Need soldering skills to do it! And be extra careful of NOT shorting the live battery wire! Not for beginners! ruclips.net/video/bdlhvcMkFKA/видео.htmlsi=YCkCgQc-glZ54OWK
Same here, just resoldering a couple of the tabs in the battery fixed it. What a pile of s#%t these scooters. Poor design, flimsy, battery can’t take the vibrations. The tabs are very very flimsy. Note that I don’t think that just adding solder will work for long. The solder will be stressed. I soldered a wire with some flex in it. Kind of a U loop. I hope this will last until… something else breaks…
You're video fixed my problem (soldering the battery), many thnx!
you fixed my problem, thanks!!!
need to get a kit and will try to fix it at home thanks again :))) i was wondering how to fix this issue maybe it will help in my case :)
Thanks
When I plug in the charger the battery red light blinks 3 times then nothing else. I have no blinking blue light the charger light remains green
@@dannyflanery7466 I have the same problem
My xaomi scooter makes the sound and display starts up for like 1 second before impartially turning back off so you think this will work?
Same problem
Wjat if the batterie already blinks in a blue light even if i plug the battery off woth the power cable? My scooter turns on amd off from.itself or turn on and off the lights. Sometimes it doesnt work right with the power button.
Thank soo much it's just happened with me I open the betray the batry conact was broken soo I'm going to the shop to fix it
I will screw this up so badly i won't attempt!
You wont, just did mine, pretty easy
@@Adrenalinmanijaci Easy if you're MacGyver, if u have all those 100 necessary tools then i guess it'll be easy, all i have is the electric screwdriver lol
Because you using solid tires... then why the joint battery are disconected.
I checked and all of them are fine. What to do next? It just sometimes not turn on
Good video. Thanks
Mine is green and when I do the bypass method where you put the wire in the black and does blue red and then it goes to red but the charger's green after a while
I have one where the red light flashes 3 times when the charger is plugged in, then nothing... Could this be a similar fault? The battery is showing a very low voltage on a multimeter too.
Cheers!
Same thing for me, maybe batteries are dead
I left my m365 unuse over a year n now not charging. I open the case, and there is no red or blue led. But upon plugin charger, it flashed red 4 times. Check BMS voltage output is 18.40v, but the battery before BMS is 36v. What can be wrong? Is the BMS board faulty after unuse for too long ?
Update: problem fixed by replacing the BMS board. Blinking blue again n able to turn on.
Mine is doing the same where can I buy the other part from
There is a youtube video on how to replace the m365 scooter bms board n link to buy the board. Note: Need soldering skills to do it! And be extra careful of NOT shorting the live battery wire! Not for beginners! ruclips.net/video/bdlhvcMkFKA/видео.htmlsi=YCkCgQc-glZ54OWK
Same here, just resoldering a couple of the tabs in the battery fixed it.
What a pile of s#%t these scooters. Poor design, flimsy, battery can’t take the vibrations. The tabs are very very flimsy.
Note that I don’t think that just adding solder will work for long. The solder will be stressed. I soldered a wire with some flex in it. Kind of a U loop. I hope this will last until… something else breaks…
Hallo my step to not open how can I it fix have a nice day
I got water in my scooter and it will not turn off, what do i do
I guess I need a soldering kit ffs
they are so cheap compared to a new battery
What if the battery pings red?
Battery is dead green is full
@@Dylan079xis it dead dead or we can recharge??
These machines seem to have so many fatal points of failure.
This case shows unacceptable manufacturing quality.
So we have a factory reset button also😮
Hello dear. Can you give a scooter
go to work and buy one then
What if you use a glue gun on all of them ?
👍