How to change your fuel filters on a 2018 Ram 2500
HTML-код
- Опубликовано: 29 сен 2024
- How to change your fuel filters
Fuel Filter Cartridge
amzn.to/3HM3TBY
Fuel Filter Spin-On
amzn.to/33dXr7N
Step Ladder For Tire
amzn.to/32Fp7SB
Fuel/Oil Filter Wrench
amzn.to/331JDxt
Fuel Filter Wrench
amzn.to/3JUvQt3
Craftsmen 28mm Socket
amzn.to/3JUwc2R
Craftsmen Swivel
amzn.to/3qYEpL2
Craftsmen Extensions
amzn.to/3HOHeoB
Craftsmen 1/2in Ratchet
amzn.to/3HPoQMe
Tag Bungee Cord
amzn.to/3PvIn7V
"As an Amazon Associate I earn a small
commission from qualifying purchases.
mr.tennessee1977@gmail.com
Definitely not Necessary but if you would like to support my channel.
cash.app/$mrten... 
Авто/Мото
Very helpful! I just bought everything I need to do this oil change and after watching your video it definitely gives me more confidence!
Good deal. You got this.
I like the wrench you use to change the sensor what size is that
If you go to any of my videos, go to the description hit More I got a storefront with it in there. If you need me to send it to you just let me know. Thanks for watching.
Wish your camera picked up that clip! Mine is mounded on top of whatever it is and I can't get to that clip. Yep, pisses me off. And the drain isn't draining. Got the hood filter changed fine. Maybe needle nose will get that rear clamp, but it sure is difficult laying on the driveway.
I'll reply to myself!! I'm 74, left shoulder replacement 2 months ago, and I'm crawling under my Ram 2500. Ha cha!! Needle nose got that sucker clamp! Just pinched it and it slid off. As for the draining, when I broke the filter loose and some air got in, it drained down the canister, but also oit of the drain. I'd already taken the tube off so it drained to the driveshaft and I caught most in a big rubber drain pan. I got the sensor off easily, new rubber seals oiled, I found to get it to screw on needed a good push and screw it on. To have this on a rack to reach it easier, the dealers charging $200 for labor is way out of reason. Thanks for your video, and others making these videos, to show just try and hopefully take your time and you can do this. I ache, but the front filter was easy, once I wiggled in and figured out the rear latch, and the drain needed the canister seal cracked, it wasn't hard. Just a fat old man doesn't wiggle on the driveway. Test drive showed no leaks. 2018 RAM 2500 has 11,262 miles- my drive way princess..
Hi, How is it that with a 2018 you don't have a push button start?
@noneya61 That was a work edition, so it did not have push to start
Another great video and helpful tips for anyone with a Ram truck, it doesn’t get any easier then that. $300 vs $700, man that’s a savings. As always God bless and safe travels
Thank you sir. That’s what it’s about saving money. Thanks for watching
👍
Hi again, not that I need it but where did you find the separator cover? I think it might be a good idea to have a spare as well. Not having much luck searching it out.
@@noneya61 I'm not really for sure. I get most of my stuff on Amazon.
Yea I’m getting ready to buy my dads 2018 gmc 2500. So I can rv transport, and so far I’ve ordered a front skid plate and lower tie rod end. There’s a leak coming from the oil filter I’ll find out what’s going on there as soon as I can get new oil and filters. My dad would just take it anywhere to get serviced so I don’t know WHO busted the boot for the tie rod end. Or what happened to the skid plate looks like the front bolts holding it on got over tightened bout idk
Man. That why when someone works on your truck you have to watch them. Hope to see you out here rolling soon
@@mr.tennessee yes sir, There’s only one guy I trust to work on my vehicles besides myself he does good work and has a small shop here in the town that I live in. But I do most work myself. Thanks for the reply, and I’m sure I’ll catch up with you at some point. Safe travels
@@TheBogart2013 yes sir that’s the way to go. Appreciate you watch in my videos and I’m sure we will run into each other one day
Very helpful video. I went with Docs Diesel filters and think I spent under 150 bucks for everything. Took me 15 minutes and saved 300 dollars vs having a shop do it. I do have a question though...where the heck did you find a 28mm swivel socket? I can't find one anywhere. Even online. Thanks!
I got it at my local shop. They should have them on Amazon.
Thank you changing my fuel filters today got mine yesterday. I had the choice of Baldwin or fleet guard. I went with the fleet guards cause I got them through my work and got a nice discount on them.
No problem
Thanks for watching
Simple filter changes on the Cummins. On the 07.5 duramax you have to remove the fender liner. What a PITA to change a filter.
Never done one on a Duramax. You could put a lift pump that would make it easier. Thanks for watching and be safe
Much Appreciated. I bought a bunch off your associate list. You could add the water Seperator sensor to your list for extra associate coinage. ~ Thx again
😂 thanks and that would be a great idea.
I have a 2012 duramax with the same style water sensor. The wires going to it are so small I think they only last a few filter changes before they break.
Have you considered filling the bottom filter before installing it and rubbing diesel on the O rings. I'm lucky I have diesel on hand so I always fill the filter first.
Your truck looks great with those rims and tires.
Thanks I like the look a lot. I don’t because I prime it. But it might help to put some in it next time. I’ll try it out. My water sensor has lasted. I got 260,000 on the truck and only had to put one on. Thanks for watching and the information. Be safe
K&N American made not china junk
I am kicking around just buying oil by the drum and set up a drum rack to do my own oil and fuel filter changes. Hopefully save some money buying in bulk.
Yes sir I think it will if you can find it. I am thinking of doing the same thing. Be safe and thanks for watching
Just changed the oil and fuel filters in my dodge 2500 I just got. This video was spot on and super helpful. Thank you!
Thank you for watching
Thanks alot of good info, your using good USA parts that's great
Thank you and thank you for watching
great info, doing my first fuel filters this weekend
Thanks. It will save you some money.
Great video! Good info
Thanks bud
thank you! followed step by step with you and got'er done
Good deal. It saves a lot of money
Great video Mr. Tennessee. I watch a lot of C. Farmers videos and have seen a lot of roadside repairs that he’s had to do to his Silverado. Would you say that you’ve had to deal with an equal number of roadside repairs, and what kind of scan tool do you recommend keeping with you to do your own repairs? Like when those trucks give you the limp mode DEF or DPF warning, is there a scan tool or tuner that can clear it or force a regen and keep you moving? I’m just trying to figure out which make Chevy/Ram is going to be easier to fix when it comes to the diagnostic/bidirectional (coding fuel injectors) and Changing out control modules that require programming? Thanks in advance for any and all your knowledge sir!
I have the scan tool in the electronic video and what you need to get starting RV transport. That is the one I have and cfarmer has. Sorry took so long to get back been under the weather and on vacation. And I have had good luck out of my truck so far The only thing I have done to it is change the water sensor and The front end line up. Thanks for watching
@@mr.tennessee thank you for the reply. I look forward to more videos.
@@richardpreston6078 thanks for watching. Hope it helps been under the weather brain not working right 😂
My truck is identical to yours and im having issues getting my fuel filter that in back off. What kind of oil filter wrench do you use? Im currently running for Indiana Transport as well. Thanks for the help.
Sorry it took a minute to answer... just now saw it... I use a swivel gripper and a water sensor/ fuel filter wrench There is a link to both of them in the description. I believe I have seen you out rolling.
Great video mr ténsese thanks.
Thank you.
Joey wish my ‘07 had two filters….
You could put a lift pump on. 😂. Thanks for watching and be safe
@@mr.tennessee yes sir, my ‘99 had a FASS and did me well, this ‘07 is soon to get one too. I’ve also got a cool secret for our fuel tank issues too, I’ll keep you posted!!!!
@@priusrepellent heck yeah keep us posted.
Thank ypu sir!
Thank you for watching.
Thank you!
No problem!!! Thanks for watching
Another good video bud
Thanks man. How is it going? Thanks for watching
Doing good. Down for the night in Alabama headed home from Baton Rouge. Picking up a boat in Lenoir city probably stay home tomorrow night then taking it to Michigan then grab another camper we’re going somewhere. Did you boys get hit with much weather earlier in the week
You were very good
Thank you