Yes!!!! Oh I thought it was for marine one, Danny, you know that “air force one” is always treated with respect and always in tip top shape no matter what it goes through, that bike deserves a makeover bring it back to its glory my man.
Danny... this tour pack on your motorbike looks awesome!!! It really completes the whole look with that beautiful paint job!!! I'm very happy for you!!! Congratulations!!! John...
Looks good Danny. My personal experience with Advanblack is mixed. Bought 2 sets of speaker lids from them. Color was great , they looked good. But it’s over time where the issues popped up. First set of lids cracked and broke at the hinge after about 3 years. I found that compared to stock lids, these lids were much thinner and plastic instead of fiberglass. The weak point gave. For the cost I said screw it, let’s try again. Bought a second set. Perfect paint looked good. This time after we years the lids began to warp. Visually you could see the warping and they started to let water in. So, scrapped those too. Went back to stock lids and did the speaker lid cut in yourself kit. Went great, looks great, if HD lids which are much better materials. I also bought a rear fender extension and heat shields, all color matched and holding up great many years later. Just a little fyi.
Can’t go wrong with Advanblack. Their quality is top notch and parts always look and feel as if they came with the bike. I’ve had their chopped tour pack for my Low Rider ST for two riding seasons now, and absolutely love it.
That looks absolutely awesome Danny. I read a couple of other comments and my first thought is over time if someone is leaning on that and with vibration it's likely to shift or work lose even with locktite. It would do No Harm to have a couple of spare nuts bolts and washers in your repair kit? Looks awesome and great job with the install 👊
Looks fantastic Danny. But even more with your beautiful Candy on the pillon😻! I have mounted the AdvanBlack (muller clutch). Now the lever is operate with one finger on my RKS 2023
Hey danni love the setup. Currently on my way to canberra and once people have asked were I'm off to they ask my if I've seen million dollar bogan and I tell them I'm on the trip because you told me to get off the couch haha take care mate trips been amazing waiting for more content....
My only gripe is the mounting bracket should be gloss black to match all the other black parts. HD’s is gloss black from the MC. Good install Danny. Advanblack’s color match is spot on! 🤙🏼🇺🇸
Danny, You will love having the tour pack. I own an Ultra limited and the extra storage of the tour pack with the paniers is great. Love the interior of that one mate. looks good. Chab.
Good job Danny, you’re almost an engineer. Just a hint, add some blue loctite to the screw threads,so the nuts won’t vibrate off and you can always undo them if needed.
Danny nice tour pack it’s amazing how factory it looks,now give us some ride vids the public demands it just kidding always a enjoy your vids it does need flames on sides
I would of liked to see some black flames on the side of the tourpack with a darker fade to the lower portion of the pack....to match the rest of the side profile of the bike.... But it looks fantastic
Am sitting grinning at Danny being so happy with himself for managing to line up some holes and put through the bolts. Maybe I'd be the same if I managed to sell a house. 😂
I don’t think it’s a disassociation thing I think hd is throwing their weight around and out of respect for Colin and his dealership Danny is keeping it to himself. We all know Harley is being real stupid right now… at least the American division. EPA and the government are mandating all kinds of crap right now.
They should have matched the bags and not the fender, but it's not perfect yet .. go get them Danny, and please don't sell out on us i would get the plush black CVO insert from H.D that diamond stitch stuff looks cheep like ebay cheep crap and i use my rick rack on my king pac with 2 up trips longer then a week i use the air wing luggage rack to mount it and a hd bag with wheels and with the tail light folks see that better when turning in off the streets advan has a nice one hd has a upgrade one and customs dynamics has one and heated gear then you are set and it needs some makers smoked lights on the pac peace out danny
Really looks the nuts and sets the bike off - Tip when putting bolts through something like body work - put a small thin rubber washer to protect and allow for vibrations- hope ur nuts were nyloc - enjoy it Candy will moan the rear cushion is too hard till it wears in, softens up 👏🏻👏🏻👍🏻👍🏻
Danny the bike is looking sweet my brother cut a hole in the top of the box for meet ball he only come out side to see his new seat so he can come riding as well keep the vids coming brother Harley man Perth 👍🕺♥️🇦🇺
I'm betting that you didn't use any locktight on the hardware before installing it on the tourpack before putting it on the bike. You better pay attention to make sure none of the hardware comes loose over time from vibration.
Nylon nuts, no need for locktite
I’d still put some on the acorn nuts that hold the back rest on. They aren’t nylocks.
Nice box. Who knows what Col from Geelong Hd would have said when he seen it ? Bring back COL
Okay Danny, now you need the matching seat to match the stunning interior of the Tour Pak! Absolutely top-notch mate!
I like how enthusiastic you are Danny. You’re like a little kid at Christmas opening presents. Good for you . God bless.
A box in a box! The 'paint matching' is exceptional, and it looks like a quality bit of kit 🙂
Yes. OK. I'm impressed, Danny. It looks great.
Most people would open the box with a box cutter, but Danny borrowed a knife off crocodile Dundee!🤣
Yes!!!! Oh I thought it was for marine one, Danny, you know that “air force one” is always treated with respect and always in tip top shape no matter what it goes through, that bike deserves a makeover bring it back to its glory my man.
Omg 😮 that looks like it came on the bike, WOW what incredible quality job they've done ❤🎉
The aftermarket tour packs have come along way in quality…looks amazing!
Glad to see million dollar bogan back. The name is iconic!
With a passenger you'll want the tour pak all the way back. It's beautiful.
Congrats Danny!!
Danny... this tour pack on your motorbike looks awesome!!! It really completes the whole look with that beautiful paint job!!! I'm very happy for you!!! Congratulations!!! John...
Bravo Danny et merci pour cette vidéo.
Un vrai professionnel 🇫🇷
In a world of mass produced shit it’s so great to see a company producing such amazing quality products. Well done guys!
I didn't even know that you had that particular CVO..I can't keep up anymore! Very nice.. and the new tour pack is excellent 👍🏻👍🏻
Now you can deliver pizzas 🐊
With pineapple 🍍
@@robertholland7558 Cool 🦖
Love that saddle, oh and that new tour pack is on fire!
Tour Pack looks quality but IMO needs to follow the same flame pattern as the bike i.e black flames on both sides and dark fade at rear.
My God, that bike is Gorgeous...
Danny's DIY HD accessories fitting, it's a new beginning. Great job, stylish and practical. Load up and hit the road now.
Looks good Danny. My personal experience with Advanblack is mixed. Bought 2 sets of speaker lids from them. Color was great , they looked good. But it’s over time where the issues popped up. First set of lids cracked and broke at the hinge after about 3 years. I found that compared to stock lids, these lids were much thinner and plastic instead of fiberglass. The weak point gave. For the cost I said screw it, let’s try again. Bought a second set. Perfect paint looked good. This time after we years the lids began to warp. Visually you could see the warping and they started to let water in. So, scrapped those too. Went back to stock lids and did the speaker lid cut in yourself kit. Went great, looks great, if HD lids which are much better materials. I also bought a rear fender extension and heat shields, all color matched and holding up great many years later. Just a little fyi.
Loctite. Just saying. You should know this by now haha
Those nuts are nylock no loctite required
Was thinking the same. It must vibrate so bad that loosen every bolts without it.
Can’t go wrong with Advanblack. Their quality is top notch and parts always look and feel as if they came with the bike. I’ve had their chopped tour pack for my Low Rider ST for two riding seasons now, and absolutely love it.
That looks very cool mate ,enjoy it man 😊
Looks awesome, you are going to enjoy the extra room. The bike's paint is spot on!
Candy is gonna love it very nice Danny
Damn mate, climbing those stairs with that yuge box had me worried about ya.
Advan always comes through with magnificent parts. Enjoy it!
Never seen a topbox lined like that. Looks great Danny . Well done 👍
I think we can all feel your excitement Danny. I also have a 22 CVO road glide but in the blue steel and smoked chrome. Awesome bike 🤘🤘
Looks freaking amazing Danny, thanks for sharing
that bike looks so good and sounds so good, diggin it!
That looks absolutely awesome Danny. I read a couple of other comments and my first thought is over time if someone is leaning on that and with vibration it's likely to shift or work lose even with locktite. It would do No Harm to have a couple of spare nuts bolts and washers in your repair kit?
Looks awesome and great job with the install 👊
Looks fantastic Danny. But even more with your beautiful Candy on the pillon😻! I have mounted the AdvanBlack (muller clutch). Now the lever is operate with one finger on my RKS 2023
Hey danni love the setup. Currently on my way to canberra and once people have asked were I'm off to they ask my if I've seen million dollar bogan and I tell them I'm on the trip because you told me to get off the couch haha take care mate trips been amazing waiting for more content....
I live in Perth by the way haha
I made it in one piece but no content this last week dani? I wonder what your upto or have planned.
That's great Danny, enjoy and ride safely.. Love love love the colour of that bike..
Danny is like a kid on Christmas morning .
Beautiful, when is the next crazy adventure!??? lol
My only gripe is the mounting bracket should be gloss black to match all the other black parts. HD’s is gloss black from the MC. Good install Danny. Advanblack’s color match is spot on! 🤙🏼🇺🇸
Every thing Advanblack offers is high quality
dude nearly got sea sick watching that
Hey Danny,
Just the finishing touch the bike needed. Quality on the vid looks amazing, enjoy mate beautiful bike.
👊😎👊
Hey Danny you have your Bay City Roller slacks on again, lol
Needs flames on the sides…looks great tho…
Totally agree. The styling doesn''t match the rest of the bike.
Advan black make quality products, I’ve got the cvo style rear guard and the paint and the way it’s made is perfect 👌🏻
Danny, You will love having the tour pack. I own an Ultra limited and the extra storage of the tour pack with the paniers is great. Love the interior of that one mate. looks good.
Chab.
That's much easier to install if you do that right on the bike brotha
Very nice looking Tour Pack Danny, Really suits your bike... Make the bike look complete Brother Cheers...
SWEET!!!!!!! That bike is BEAUTIFUL.
Alan set you up very well Danny!!
I only got a good look at one of those nuts during that whole mounting procedure and, that was you Danny!
I need to have a lay down now, I'm feeling dizzy from that camera work.
Advan black has the best color match, quality stuff for sure!!
Looks great Dan, I might have to get them to do one for my CVO ST
That's my favourite bike of yours Danny... stunning... I'd never get off it.
Can’t wait to see the first roadie
Awesome thanks for the review. It eased my mind. I’m waiting for a set of lowers for my 21 cvo street glide from them. They are waiting to be painted.
Good job Danny, you’re almost an engineer. Just a hint, add some blue loctite to the screw threads,so the nuts won’t vibrate off and you can always undo them if needed.
Let the boy's over at RickRak know which luggage rack you put on the new tour pack and they have a luggage system to fit it.
Colin is going to want you to install parts at GHD if he watches this 🏍
😂😂😂😂 good call mate
ruclips.net/user/shortszAhx1TG5Y50?si=fRscyEGeMjbfPFce
Looks great on the bike. Well done.
Danny nice tour pack it’s amazing how factory it looks,now give us some ride vids the public demands it just kidding always a enjoy your vids it does need flames on sides
I would of liked to see some black flames on the side of the tourpack with a darker fade to the lower portion of the pack....to match the rest of the side profile of the bike.... But it looks fantastic
Love the colour looks really well made bit dizzy with the filming in parts but great addition to the bike
Nice! Great looking paint job!
Danny You must of Worked at *IKEA* Assembling Furniture 😂
Am sitting grinning at Danny being so happy with himself for managing to line up some holes and put through the bolts. Maybe I'd be the same if I managed to sell a house. 😂
So check it out, Danny borrows a phrase from Cycle Fanatix with “Holy Cow” and Cycle Fanatix has been using “Vast” from Million Dollar Bogan 🤙🏻🤙🏻🤣🤣
Yea cause nobody else uses those phrases😂😂😂 You watch way too much RUclips. Get out more!
Who cares,👍👍
Looks sweet mate ... Definitely a nice touch to the bike . I just put one on my bike before we went to Ocean City Maryland Bike week
Love the two headless dancing flame ladies either side, they match the front mudguard!!!
It’s only a few hundred dollars less than a Harley tour pack. I bought one when I bought my road glide earlier this yr.
Nice. ...perfect for some outback bush adventure😂
Looks beautiful Danny
Looks great
Meatball at the end, too good 😂
Hahahah 😂 hope it goes on ok and ya don't forget anything.
There is a an elephant in that box, Col.
LEGEND!! 👊
Beautiful motorcycle your a lucky man
Can we get answers about the obvious disassociation from G-HD
@@zachcartledge4812 looks like the only way to find out is to phone Col
I don’t think it’s a disassociation thing I think hd is throwing their weight around and out of respect for Colin and his dealership Danny is keeping it to himself. We all know Harley is being real stupid right now… at least the American division. EPA and the government are mandating all kinds of crap right now.
No, it's irrelevant so get over it!
@@Michael-n3o thanks didn’t realise you were a Harley Davidson or Daniel Hayes representative/ spokesperson
@@jpadv4157 bugger off, didn’t ask you
If those bolts don't have lock washers then you should use blue lock-tite on the threads of the screws to prevent them from coming loose.
There nylock nuts
lov'n the inside bling....
Looks fantastic Danny
Bravo mate, now you can fall down and scratch it up.
Spoiler alert, Perry is in the box
From the packaging to the details of the bags, I think the luxrul shop has made reproduction an art form.
Looks bloody good 👍
They should have matched the bags and not the fender, but it's not perfect yet .. go get them Danny, and please don't sell out on us i would get the plush black CVO insert from H.D that diamond stitch stuff looks cheep like ebay cheep crap and i use my rick rack on my king pac with 2 up trips longer then a week i use the air wing luggage rack to mount it and a hd bag with wheels and with the tail light folks see that better when turning in off the streets advan has a nice one hd has a upgrade one and customs dynamics has one and heated gear then you are set and it needs some makers smoked lights on the pac peace out danny
Ok im Gunnar say it after watching the bogan for years I missed you mate hope your well 👍
Really looks the nuts and sets the bike off - Tip when putting bolts through something like body work - put a small thin rubber washer to protect and allow for vibrations- hope ur nuts were nyloc - enjoy it Candy will moan the rear cushion is too hard till it wears in, softens up 👏🏻👏🏻👍🏻👍🏻
Looks amazing.
And the channel name changes back....
Glad it did
What was it?
@@MythicPon3 Danny Hayes
Danny Hayes Go Harder
I have two plastic milk crates on the back of my scooter, Danny, that is fkn beautiful.
Beautiful bike 👌
Nice box you got there
Danny the bike is looking sweet my brother cut a hole in the top of the box for meet ball he only come out side to see his new seat so he can come riding as well keep the vids coming brother Harley man Perth 👍🕺♥️🇦🇺
Very nice Danny!!
Looks great could have had a little more black on the side buts that's just me
I'm betting that you didn't use any locktight on the hardware before installing it on the tourpack before putting it on the bike. You better pay attention to make sure none of the hardware comes loose over time from vibration.
Beautiful paint
Great stuff - why don’t AB provide a cushion that more matches the CVO styling. - only thing that lets it down a bit. Ride safe 🙏👊🏻