What a great helpful explanation. I have a similar problem with an old sewing machine. At least now I understand what to look for and how it should be timed.
I have the same exact model and color! Unfortunately is doesn't work! It will run but I think it's missing the lower looper but I'm gonna try and fix it!
Hi. I’m having a similar problem but with a BL4-736d. Turning the handwheel I have needle bar movement and upper and lower loopers moving but the feed dogs don’t move nor does the cam that you adjust stitch length with. It’s not rotating at all.
l was given a MAMYLOCK ML-4 same machine as your different color front plate, l have never seen these machines it runs like a Swiss watch, one needle is broken, l did a clean up inside, and oiled all the moving parts, l can't wait to use it, have to order some needles, my timing is right on the money but it's good to know how to retime it should it get out of timing. Thanks for the video.
I hope you can help me! Working on a Babylock 5260D(N) and the feed dogs do not move at all. Looks very clean in machine and screws as you showed in this video seem tight. Any other suggestions please?
Hi Gary, Many thanks for this video. We have a similar bl3-428 …would it be possible to run through how to adjust the stitch width on this machine ? We’re stuck at 2.5mmm. Cheers Andrew
dude i’m in need of this same thing! i have the 4 thread and i can only get the middle 2 nobs to stitch together. the first and the 4th won’t ever time right
Hi, I have a similar overlock machine, a Rimoldi 34df 4 thread, made by Juki. I'm needing to replace knives in it and struggling to find what to order as replacement parts. I'd be really grateful for advice. 🤞
Oldham Coupling I was surprised to see the drive in action, I learned about them 50y ago invented in 1821 ruclips.net/video/CRwCfuejWAQ/видео.html en.wikipedia.org/wiki/Coupling#Oldham_coupling One of my 1880 machines had blunt teeth, I used a saw file to give them a bit more bite, the material was bunching as the take up leaver was pulling back over the rounded teeth.
Best explanation so far. My friends is a Singer but I guess the principle is the same. Reckon this is her problem so I'm going to give it a go ;)
What a great helpful explanation. I have a similar problem with an old sewing machine. At least now I understand what to look for and how it should be timed.
I have the same exact model and color! Unfortunately is doesn't work! It will run but I think it's missing the lower looper but I'm gonna try and fix it!
Hi. I’m having a similar problem but with a BL4-736d. Turning the handwheel I have needle bar movement and upper and lower loopers moving but the feed dogs don’t move nor does the cam that you adjust stitch length with. It’s not rotating at all.
I'm having the same problem, same model. How did you fix it?
@@JackieRussel put it back the box and ignored it
I’ve got the same issue - have tried lubricating and running for a bit but still the feed dogs don’t move.
@@SewGurl58 I was able to completely fix mine. If you're interested in help, let me know.
@@nabeelah123 could be the feed eccentric is locked up. I know a guy that can help.
l was given a MAMYLOCK ML-4 same machine as your different color front plate, l have never seen these machines it runs like a Swiss watch, one needle is broken, l did a clean up inside, and oiled all the moving parts, l can't wait to use it, have to order some needles, my timing is right on the money but it's good to know how to retime it should it get out of timing. Thanks for the video.
I have problem with the cutter, where the cutter in ,thanks
I hope you can help me! Working on a Babylock 5260D(N) and the feed dogs do not move at all. Looks very clean in machine and screws as you showed in this video seem tight. Any other suggestions please?
I have the same issue - did you ever get it to work?
Hi Gary, Many thanks for this video. We have a similar bl3-428 …would it be possible to run through how to adjust the stitch width on this machine ? We’re stuck at 2.5mmm. Cheers Andrew
Hi Andrew. Sorry, I no longer have the machine with me but I may have one in storage and will do a video on that some time. Cheers.
I have a serger that's eating my fabric, any help would be appreciated.
Would you happen to have any information for a baby lock BL90 regarding the fabric not feeding as well?
dude i’m in need of this same thing!
i have the 4 thread and i can only get the middle 2 nobs to stitch together. the first and the 4th won’t ever time right
Hi, I have a similar overlock machine, a Rimoldi 34df 4 thread, made by Juki. I'm needing to replace knives in it and struggling to find what to order as replacement parts. I'd be really grateful for advice. 🤞
My feed dogs on my overlock machine are moving in reverse I've looked everywhere I can't find anything on this can you help
Hola cómo puedo embrarla no sé cómo
Hello there, I have same this machine but it is giving me a back ward please help 😢
あ
arigato
Oldham Coupling I was surprised to see the drive in action, I learned about them 50y ago invented in 1821
ruclips.net/video/CRwCfuejWAQ/видео.html
en.wikipedia.org/wiki/Coupling#Oldham_coupling
One of my 1880 machines had blunt teeth, I used a saw file to give them a bit more bite, the material was bunching as the take up leaver was pulling back over the rounded teeth.
I have problem with the cutter, where the cutter in ,thanks