yes and that too at wopping 30fps at 1440p or 4k. performance mode would provide 60 at 1440p or 1080. pretty sure gta6 it will set one of the biggest benchmark in gaming industry@@MachinimaCommentary1
I hope you realize you're supporting actual slavery by buying from TEMU. Look into the Uyghur people, Someordinarygamers, and the people from The China Show have both covered this fact pretty well.
Real talk though, even if it does help, I don’t think it’s worth anyone intentionally trying to buy faceplates with holes on the side. There have been so few overheating issues with the ps5, I don’t think there’s anything wrong with sticking to the oem setup. Especially these, because the build quality is terrible lol
@24lunaticasylum Shouldn't. But full disclosure, I don't own a ps5, and am only basing my assertion on the design of the fan as it is essentially the same mechanical layout as a blower fan on a graphics card which pulls air in from the bottom of the card and pushes it out the rear.
8:34 I like how we can see Jacob's set up of the two monitors off the reflection from the gold PS5. Also it reveals the monitor behind Jacob is just a green screen.
I guy already did a video on vented face plates if anything the vented face plates help by 1 degree they do not interrupt the airflow go watch the video. It's like an hour long
That's reasonable paranoia though. I heard enough stories about faulty 360 ventilation fan accessories that bricked the console. I don't trust accessories that are intended on being powered from the console's USB ports because of that.
@@jrob0021yea but there pretty good quality the plastic is a nice quality and the fan cut outs have dust covers that are removable so easy to clean. My console runs cooler about 3 degrees cooler.
@@PepsiManX360 oh yeah I don't doubt that they're nice plates, I just don't think anyone should buy them for the sole purpose of reducing thermals by 3 degrees. But here's my thing - if the dbrand plates, which were probably designed with lower temps in mind, only lower the temp by 2-3 degrees, I can't imagine these cheapo plates from temu are improving thermals at all. If you compare the design side-by-side, it looks like the dbrand plates have more open ventilation than the temu plates. The vents on the temu plates also jut out a bit - not sure how that would affect airflow. And then you throw on RGB lights under those vents, which take up even more airflow space, and you're definitely not getting better thermals. So I'd wager that these temu plates plus rgb lights are probably making your ps5 3 degrees hotter. I say all of this, but I honestly don't think it's a big deal either way. I don't think +/-3 degrees is going to be the difference in your console overheating or not in the vast majority of cases. I think most people should just buy the plates they think look cool. My ps5 personally still just has the og plates
Nah them dust filters are good, my pc front has the same mesh and it catches dust and my pc isnt as dusty inside since using it. Definitely worth getting for ps5
Temu is not worth it. billionaires dont shop there. That " dust cover " is obstructing air flow. Open a window and leave the screen down youll feel air but not as much as you would if the screen were open. It also looks like someone took some scissors to a screen mesh without measuring it.
That faceplate, you have a tool that tests for over heating, why not test it to see if it over heats then everyone will know if that plate is OK to use or not
There was a test with thr holes in the plate for the fans and it is cooler than without. I had a PS5 which keep overheating. Cleaned it all out but still. After the fan holes in the cover, the problem was gone.
Not to get into the science of aerodynamics too much but the vent would not interrupt airflow, depending on angle of design it could actually improve it. However I still think it’s not a good idea to make a habit of buying faceplates with holes or vents because they could be pointless, and adding the RGB and junk is what really interrupts the heating/cooling of the system.
I have the DBrand 2.0 dark plates and my console runs perfectly fine I think it runs better because before I got those plates the fan was a little noisy and after with the new plates it’s more silent. Plus DBrand offers dust covers so it keeps the fan from getting all dusty lots of other plates I noticed don’t.
According to the PS engineers the ps5 cools on vacuum, så the intakes on the side could actually remove some cooling flow from the SSD you can put in yourself, so if you upgrade your storage you need to block the sidevents on that side of the SSD so the flow of air comes over the cooling sink or else you shorten the lifetime and could end up damaging internal components :)
I put the leds on mine a long time ago love them you just need to take your time on the install. Also their skins are great if you TAKE YOUR TIME lol (not an affiliate lol) they have goven me lots of free stuff though.
Companies have been doing it for years. Creating 3rd party accessories with more holes and fans trying to solve something that’s largely a non issue. I think the holes are interesting in this case since you can see the lights through them
Yeah I'm sure they are lol. Darkplates were the first to put side grills for fans I believe. A tad expensive but I've heard good things about them, they even have clear retro atomic colors.@@jrob0021
@@jrob0021I have the original dbrand darkplates before Sony sued them.they are actually surprisingly better than the official ps5 plates.they are a darker black better texture.they are a little thicker and way more sturdy then the Sony plates
08:00 why not put it in the USB port on the fan? 😂 And it should pull air out of the console not blow air in. The back vents is where the hot air is pushed out so why put something that blocks the flow?
The accessories are okay I guess. I wouldn't under any circumstances purchase the "cooling" fan. I'm a fan of the Black and White aesthetics of the PS5 so I wouldn't get that either. Hm, come to think of it, I probably wouldn't get any of this stuff in this video, except maybe the PS5 logo stickers.
I plugged mine in and it feel apart in my hands no lie I love shopping with this place but the stuff is cheap made knock off shh that makes my head hurt sometimes anyways my lights still work ordered them months ago 😊
Don't just throw out those lights! Make up a good reason to "return" them, and there is a high chance they will refund you and you can do whatever you want with it then. Also check as often as possible (once daily) for a price adjustment for each order you make! Every time the prices drop they will refund you!!! And if you care, play farmland and fish land daily. Ignore the other games, they are mostly scams. But those 2 games are legit, if you want to put in the work daily for nearly 3 months.
I have a faceplate set for my ps5 with vents and has dust fillers on it for over a year and my ps5 works just fine if anything it runs more quietly because it has direct access to fresh air so the fans don’t have to work as hard my model of ps5 is the first edition with the big heatsink so can’t speak for the other models but like I said mines running just fine
Looks like new metallic alloy paste revalutionary most expensive exclusive thenlike akobe transformative transformer most ever in front of the orca exhibite best opener opened
Yeah I’ve seen some other people say that as well. Although tbh, I don’t think these can be compared to dbrand. The ventilation holes are completely different and the ventilation portion juts out a little bit compared to dbrand. Given that the dbrand plates only improve cooling by a small amount, would these changes give the same results? I have no idea, but I’d guess if they do help cooling, it’s probably not as much as dbrand. Dbrand was probably designed with extra cooling in mind, I can guarantee you these were not. Either way I don’t think it’s worth spending a bunch of money for a few degrees of extra cooling. Just buy the plates if u think they look cool
Walking around with a PS5 sized backpack with a PS5 logo.......hmmmmm try walking around the rough areas of LA or London with that.... you're sure to be in the news.....
I think the gold ps5 over heated the console for one.Two there are way too many wires.Three that is what damages it faster like my old Super Nintendo….
I can’t wait for the PS5 edition TEMU
PREINSTALLED TRACKER TO BE TRACKED WHEN YOU TURN IT ON
Will the ps6 run gta 6?
yes and that too at wopping 30fps at 1440p or 4k. performance mode would provide 60 at 1440p or 1080. pretty sure gta6 it will set one of the biggest benchmark in gaming industry@@MachinimaCommentary1
I hope you realize you're supporting actual slavery by buying from TEMU. Look into the Uyghur people, Someordinarygamers, and the people from The China Show have both covered this fact pretty well.
Just an opinion, the gold plates look cheap like the cheap chrome colored toys made from _________
4 ads in 2 seconds you really suck RUclips I miss the old RUclips.
this is NOT the appstore/playstore lil bro.
There's ways to get around that
@cryptosapien8420 On PC and phone, yeah, but not on Xbox/PS5 RUclips app (that I know of). Most common way I watch RUclips (because big screen TV).
You bought the temu ps5 face plates not temu ps5 console.false thumbnail.
Saved me the watch 👌
@@itzandylee4397but if you watch you become 20% more sigma
@@PurpleMonkVR4you're so cringey nobody says sigma it's unfunny
@@PurpleMonkVR4 my bad luh bro it just sounded like you were fr😔🙏
Fr. Bro
found this channel during the DK oldies videos, stayed because I enjoy all of his content. Keep putting out the content Jacob!
Me too😂
Me too
That image of the swagged out PS5 is the best thing I've seen all day.
"If Goldmember owned a PS5."
Bc he like gold
Shhhhmoke and a pancake
Let play playshation 5 awshtin powers and Fahja LOL my console it's nothing you ever seen. It's made of GOOOOOOLD (GOLD)
What about lclc
@@donnellcoleman7784”fake gold” right?
The fan is a blower style, so having that vent on the side should provide significantly better intake flow to the fan.
Not once you throw on 2 sets of rgb lights 😂😂
Real talk though, even if it does help, I don’t think it’s worth anyone intentionally trying to buy faceplates with holes on the side. There have been so few overheating issues with the ps5, I don’t think there’s anything wrong with sticking to the oem setup. Especially these, because the build quality is terrible lol
@jrob0021 so if I wanted the fan vent holes on the side just for the aesthetic would that be ok? Doesn't interfere with cooling?
@24lunaticasylum Shouldn't. But full disclosure, I don't own a ps5, and am only basing my assertion on the design of the fan as it is essentially the same mechanical layout as a blower fan on a graphics card which pulls air in from the bottom of the card and pushes it out the rear.
@@24lunaticasylum the lateral vents improve . See Gamer Nexus
This is the PS5 you would get if you won the Taco Bell contest
Haven't seen your videos on my yt for a while now, glad to check this one out.
Ngl, the led lights with the gold face plate looks sick. This edition looks cool.
8:34 I like how we can see Jacob's set up of the two monitors off the reflection from the gold PS5. Also it reveals the monitor behind Jacob is just a green screen.
inception
I really like that gold PS5 with the LED lights, pretty cool, tacky, but cool. BTW those fans tend to make more damage than any good.
Probably introduces dust
I guy already did a video on vented face plates if anything the vented face plates help by 1 degree they do not interrupt the airflow go watch the video. It's like an hour long
I'm always paranoid about breaking my stuff and feel like if I got those LED lights, I'll destroy my PS5, lol.
That's reasonable paranoia though. I heard enough stories about faulty 360 ventilation fan accessories that bricked the console. I don't trust accessories that are intended on being powered from the console's USB ports because of that.
Those vents on the sides are helpful.
DBrand uses them for the Dark Plates 2.0 and other have ran tests and it lowers the temperature by around 2-3°F
$70 for 3 degrees? Come on now lol
you buy them to make it not white anymore. why theyre called DARK plates. you dont buy them for the holes. @@jrob0021
$70… Yes, but they’re a nicer set of plates than the Seto Kaiba OG plates. Just pointing out that it isn’t going to damage your system.
@@jrob0021yea but there pretty good quality the plastic is a nice quality and the fan cut outs have dust covers that are removable so easy to clean. My console runs cooler about 3 degrees cooler.
@@PepsiManX360 oh yeah I don't doubt that they're nice plates, I just don't think anyone should buy them for the sole purpose of reducing thermals by 3 degrees.
But here's my thing - if the dbrand plates, which were probably designed with lower temps in mind, only lower the temp by 2-3 degrees, I can't imagine these cheapo plates from temu are improving thermals at all. If you compare the design side-by-side, it looks like the dbrand plates have more open ventilation than the temu plates. The vents on the temu plates also jut out a bit - not sure how that would affect airflow. And then you throw on RGB lights under those vents, which take up even more airflow space, and you're definitely not getting better thermals. So I'd wager that these temu plates plus rgb lights are probably making your ps5 3 degrees hotter.
I say all of this, but I honestly don't think it's a big deal either way. I don't think +/-3 degrees is going to be the difference in your console overheating or not in the vast majority of cases. I think most people should just buy the plates they think look cool. My ps5 personally still just has the og plates
Nah them dust filters are good, my pc front has the same mesh and it catches dust and my pc isnt as dusty inside since using it. Definitely worth getting for ps5
Yeah it wasn’t as bad as I thought it’d be, but this thing was ugly lol
@@jrob0021 ha yeah definitely not the best looking ps5 ive seen 😅
your pc probably has more than 1 fan in the front tho to counteract the restriction of the dust filter. this ps5 literally only has 1 fan
@@C0mmanderXgood point
Temu is not worth it. billionaires dont shop there. That " dust cover " is obstructing air flow. Open a window and leave the screen down youll feel air but not as much as you would if the screen were open. It also looks like someone took some scissors to a screen mesh without measuring it.
9:10 bro bought an 8th from the dispensary 😭😂
😂😂
I think those LEDs need to be screwed below the fan metal plates
That faceplate, you have a tool that tests for over heating, why not test it to see if it over heats then everyone will know if that plate is OK to use or not
For the fan led you need to take the cover and then take off then take ps5 fan cover off then you stick the led in then screw it back
There was a test with thr holes in the plate for the fans and it is cooler than without.
I had a PS5 which keep overheating. Cleaned it all out but still.
After the fan holes in the cover, the problem was gone.
What kind of Frankenstein monster have you done?! 😂
Not to get into the science of aerodynamics too much but the vent would not interrupt airflow, depending on angle of design it could actually improve it. However I still think it’s not a good idea to make a habit of buying faceplates with holes or vents because they could be pointless, and adding the RGB and junk is what really interrupts the heating/cooling of the system.
I have the DBrand 2.0 dark plates and my console runs perfectly fine I think it runs better because before I got those plates the fan was a little noisy and after with the new plates it’s more silent. Plus DBrand offers dust covers so it keeps the fan from getting all dusty lots of other plates I noticed don’t.
According to the PS engineers the ps5 cools on vacuum, så the intakes on the side could actually remove some cooling flow from the SSD you can put in yourself, so if you upgrade your storage you need to block the sidevents on that side of the SSD so the flow of air comes over the cooling sink or else you shorten the lifetime and could end up damaging internal components :)
Pimp my ps5
The airvents on the aide makes it alot cooler my ps5 was cooking with the revular plates now it never gets hot i got gold plates to but sleeker design
8:35 u can use notebook paper for air blow/suction test
Oh good idea
I put the leds on mine a long time ago love them you just need to take your time on the install. Also their skins are great if you TAKE YOUR TIME lol (not an affiliate lol) they have goven me lots of free stuff though.
i think those gold plates will actuly improve airflow!!! its not like the psp you modded that u destryed the internal housing...
How fitting that I got an ad for Temu before watching this.
Maybe a PS5 slim or digital would fit better in the PS5 backpack and you can still carry a few games and your controller.
This guy is goated bro buys weird stuff/ accessories and then tries it on his ps5
"Actually kinda cool" tuff ah bro fr I had a good time watching this 😂
1:34 The Rich Man's PS5
I have had no issues from temu yet , been using them from day one.
I like the stickers but only want the original PS1 logo colors. I hate that they come with other colors for $3
I get almost the same rgb effect when i leave my skylanders portal plugged in
1:25) I see an Xbox 360 in the bottom left corner
2:16) Jacobr is a blob in the reflection
The good faceplates are a huge win it’s like getting the xbox Star Wars edition console for dumb cheap
bro when i got my new ps4 controller for xmas (i lost my old one) the manual said wireless controller for P4
😂 temi orders look like 👍 when you got something from a crackhouse 😂 or from the dark web 😂 😂
I think it's hilarious that third-party is flooding the market with faceplates that have ventilation holes lol.
Companies have been doing it for years. Creating 3rd party accessories with more holes and fans trying to solve something that’s largely a non issue. I think the holes are interesting in this case since you can see the lights through them
Go overboard more LED lights More more power Make it the brightest PlayStation 5 So bright you can see it from space
The faceplates reminded me of C-3PO and R2-D2 Xbox’s they came out with
We can all take our PS5s to school now. Been waiting for the right backpack.
They could have at least added a side pocket on the outside of the backpack to put the controller lol..
Even TEMU is taking notes from the dbrand darkplates
I’ve never used the dbrand plates, but these are absolute junk lol
Yeah I'm sure they are lol. Darkplates were the first to put side grills for fans I believe. A tad expensive but I've heard good things about them, they even have clear retro atomic colors.@@jrob0021
@@jrob0021I have the original dbrand darkplates before Sony sued them.they are actually surprisingly better than the official ps5 plates.they are a darker black better texture.they are a little thicker and way more sturdy then the Sony plates
And there you have it, the PS5 solid gold, pimp edition coming to a hood near you!
Gold PS5 looks sick! Hate white faceplates on og.
No. There are good tests that indicate that the lateral vents improve the temperature
Here’s the TL;DR for this video
“This thing is actually pretty cool, the only downside is, it sucks”
The RGB lights is cool!
08:00 why not put it in the USB port on the fan? 😂 And it should pull air out of the console not blow air in. The back vents is where the hot air is pushed out so why put something that blocks the flow?
The accessories are okay I guess. I wouldn't under any circumstances purchase the "cooling" fan. I'm a fan of the Black and White aesthetics of the PS5 so I wouldn't get that either. Hm, come to think of it, I probably wouldn't get any of this stuff in this video, except maybe the PS5 logo stickers.
Maybe the classic logo sticker with gray faceplates to mimic the classic playstation
"Dr. Evil, can I paint his (PS5) GOLD?"
I used to have the gold sticker thing for my PS4 slim.
Well no wonder i didn't know those faceplates existed, I never use temu.
I plugged mine in and it feel apart in my hands no lie I love shopping with this place but the stuff is cheap made knock off shh that makes my head hurt sometimes anyways my lights still work ordered them months ago 😊
Why did I think that the “8K” on the thumbnail said “EPK”
Dust cover makes it look trailer…like a PS5 with a crappy screen door 😂
Don't just throw out those lights!
Make up a good reason to "return" them, and there is a high chance they will refund you and you can do whatever you want with it then.
Also check as often as possible (once daily) for a price adjustment for each order you make! Every time the prices drop they will refund you!!!
And if you care, play farmland and fish land daily. Ignore the other games, they are mostly scams. But those 2 games are legit, if you want to put in the work daily for nearly 3 months.
I just watched this whole video just for him to not even plug it up and show us what it looks like when you try to play it ...
I'm trying to work out the level of sarcasm in this
It was a extra usb port on the fan thing
PS5 looks like its on life support equipment.
really good video love the gold and the rgb fans so cool
I have a faceplate set for my ps5 with vents and has dust fillers on it for over a year and my ps5 works just fine if anything it runs more quietly because it has direct access to fresh air so the fans don’t have to work as hard my model of ps5 is the first edition with the big heatsink so can’t speak for the other models but like I said mines running just fine
It looks INSANE nice
Love the video man ❤
Looks like new metallic alloy paste revalutionary most expensive exclusive thenlike akobe transformative transformer most ever in front of the orca exhibite best opener opened
So I'm confused. The video says you bought ps5. The pic shows a ps5 console. But it's accessories... Don't get it.... Nice video though
Wrap a towel around the ps5 to protect it
Next upload is more Hampton Haul where you test the consoles you just shown previously right? I wanted to see how those 360s are doing
the ps5: im tired boss
Can you do xbox accessories next? Love the content
Crazy prices tho
have you connect the PS 5 portable to the PS 4
The LEDs were the only useful item there. The gold covers do change the look if it is what you like.
bro temu ad showed up when i click on this video
Er uit doen en weer er in doen kan helpen
He keeps assuring us he’s not gonna lie. Do we have reason to believe he will? Makes you wonder
man just got the goldmember ps5
How to make a £600 console look like a quality street sweet. That gold makes it look sooooo tacky.
The faceplates actually seem to be quite good. (They even seem less of a fingerprint magnet than I thought!). The rest though, not really worthwhile.🔰
3:20 more like handcuffs 💀
Dbrand fPS5 plates have the vents on the side also with filters. It has shown to actually improve airflow.
Yeah I’ve seen some other people say that as well. Although tbh, I don’t think these can be compared to dbrand. The ventilation holes are completely different and the ventilation portion juts out a little bit compared to dbrand. Given that the dbrand plates only improve cooling by a small amount, would these changes give the same results? I have no idea, but I’d guess if they do help cooling, it’s probably not as much as dbrand. Dbrand was probably designed with extra cooling in mind, I can guarantee you these were not. Either way I don’t think it’s worth spending a bunch of money for a few degrees of extra cooling. Just buy the plates if u think they look cool
The dualsense controller in the tumbnail wth
Walking around with a PS5 sized backpack with a PS5 logo.......hmmmmm try walking around the rough areas of LA or London with that.... you're sure to be in the news.....
Funny how Sony went from making crappy rice cookers to having crappy PS5 accessories
I'm surprised that TEMU isn't receiving a MASSIVE, MASSIVE LAWSUIT by Sony?!
$11 for 30 LEDs. Bruh that’s a rip off
You can mimic the Taco Bell Gold PS5.
those lights gonna go crazy for COD players
You’re right 😂
Dust cover more like fish nets for the ps5 😭
AH yes those faceplates... "more holes means cooler right?"
Not if the console was designed a certain way!
With the gold it looks like it belongs to iron man 😂
I wonder if it really work though
More dust going in too but still good
I think the gold ps5 over heated the console for one.Two there are way too many wires.Three that is what damages it faster like my old Super Nintendo….
more like rgb blinding lights coming out of the system