I used to say 'PIN number' too, but I learned that 'PIN' already means 'Personal Identification Number,' so it's a bit like saying 'Personal Identification Number number.' It's a small thing, but it sounds a little cleaner just to say 'PIN.' I thought I’d share that in case it helps!
Why i couldn't speedup your videos? Some videos have slower speakers and to not get bored we try to speed him up to be able to listen and watch the video.
you mentioned here at 18:34 that a custom number can be added and this is not the case. I am on the same firmware version as yourself and that option to type a number doesn't work and in turn call diversion unconditional and follow me don't work. we need to use enable filter on source caller id and call forwarding never works
Hello, I'm using VIOP trunks with google voice. I'm trying to setup a pattern to prepend the 1 so I can do 10 digit dialing. I have follow what you did in this video but I keep getting an error when I dial and have to dial 11 digits. Any tips I should check for so I can get this to work.
Hi I have 6204. When dialing out using analog trunk /PRI; this PBX doesn't give PRI dial tone. In my earlier experience on analog PBX was when we use code 0 to dial outside network we used to get different dial tone (which confirms that PRI line is up & running). Can we have similar function in this PBX?
Hello, you can find more information on finding the default IP for the HT701 via the manual for the device. You can find that here: www.grandstream.com/support/resources/?title=HandyTone%20701
I used to say 'PIN number' too, but I learned that 'PIN' already means 'Personal Identification Number,' so it's a bit like saying 'Personal Identification Number number.' It's a small thing, but it sounds a little cleaner just to say 'PIN.' I thought I’d share that in case it helps!
Why i couldn't speedup your videos? Some videos have slower speakers and to not get bored we try to speed him up to be able to listen and watch the video.
Hello. My reciever isn’t showing caller id. It shows anonymous call. Can you please help me in this?
you mentioned here at 18:34 that a custom number can be added and this is not the case. I am on the same firmware version as yourself and that option to type a number doesn't work and in turn call diversion unconditional and follow me don't work. we need to use enable filter on source caller id and call forwarding never works
what that feature of +x. in pattern for what purpose to use. if X. means all number can be called
Hello, I'm using VIOP trunks with google voice. I'm trying to setup a pattern to prepend the 1 so I can do 10 digit dialing. I have follow what you did in this video but I keep getting an error when I dial and have to dial 11 digits. Any tips I should check for so I can get this to work.
Hi
I have 6204.
When dialing out using analog trunk /PRI; this PBX doesn't give PRI dial tone.
In my earlier experience on analog PBX was when we use code 0 to dial outside network we used to get different dial tone (which confirms that PRI line is up & running).
Can we have similar function in this PBX?
for ucm6204 for outbound kindly explain this pattern _0[1-9].
Hi. I have grandstream HT701. What is the default IP for this?
Hello, you can find more information on finding the default IP for the HT701 via the manual for the device. You can find that here: www.grandstream.com/support/resources/?title=HandyTone%20701
Thank you