Dude…your channel is like the only one out there pretty much exclusively focused on the xrs and 2zz. Many props to you. You should draw up a written step by step treatise on: A- in car timing chain gasket. B- complete removal and install of engine/tranny like this video. Fk…I’d pay you like a hundo for that. Kinda like a getting a coffee mug with a $100 donation to pbs lol. (No I don’t need a 2zzlow coffee mug lol). Sure, I can watch the videos but it’d be nice to have it all written down.
And….I have the factory shop manual…but that’s kind of useless for real world shadetree mechanic. And some of the odd translations and misspellings…somewhere they actually spelled flywheel “frywheel”. I shit you not. Lmao.
I saw another video where a guy used that fork you put in the transmission as a tool to pop the cv axle out of Celica. It fit in perfect and he tapped the end and the axle popped right out. It is a pain in the ass to get those out. Great video, I appreciate the step by step approach.
Hey, new to your channel. I’m going to look at a 170k miles xrs matrix. I’m completely new to the platform. Is 170k too high? What should I look for when I go look at it? He’s asking 5.5k seems high to me, am I right?
Hello i love your videos was wondering if you knew where of if you had a 1mz trd supercharger i really want one for my car but there impossible to find
Hello, I have a matrix xrs 2003 2zz-ge, I have problems with the idle, I have thought that it is the vacuum system, but I do not understand the diagram. Could you help me with some pictures of the throttle body hoses, and the vacuum system? thanks for your time
thanks for always spreading knowledge with these videos! did the brown axle seal have a spring o-ring in it? i was just cleaning a c60 i picked up and a circle o-ring popped out so I am assuming it is part of the axle seal. I didn't see one in yours so thought it was worth asking.
Hey bro I just got the c60 for my corolla, I was just asking if you have or know where to get the shifter shaft for the corolla because the one I got is off a Celica
Hi mate question having problem I have Toyota celica vvti mrk7 have original exhaust pipe having problem getting o2 sensor off its rounded so normal o2 sensor wont grip it tried heat and spanner. Havnt got right size bolt extractor...
Can’t adjust the valves. I believe you need to install thicker shim buckets for the valve caps? I haven’t really dug deep into those areas with the 2zz.
Dude…your channel is like the only one out there pretty much exclusively focused on the xrs and 2zz. Many props to you.
You should draw up a written step by step treatise on:
A- in car timing chain gasket.
B- complete removal and install of engine/tranny like this video.
Fk…I’d pay you like a hundo for that. Kinda like a getting a coffee mug with a $100 donation to pbs lol. (No I don’t need a 2zzlow coffee mug lol). Sure, I can watch the videos but it’d be nice to have it all written down.
will give it a thought thanks again fam
And….I have the factory shop manual…but that’s kind of useless for real world shadetree mechanic. And some of the odd translations and misspellings…somewhere they actually spelled flywheel “frywheel”. I shit you not. Lmao.
that 2zz engine sound never gets old :D
indeed my friend
I saw another video where a guy used that fork you put in the transmission as a tool to pop the cv axle out of Celica. It fit in perfect and he tapped the end and the axle popped right out. It is a pain in the ass to get those out. Great video, I appreciate the step by step approach.
Lol watch my corolla xrs c60 video, I use the same item to remove the driver axle
Beautiful work
Thank you! Cheers!
Of course, it will start & run as fast and furious
lol just solid bro
Did you end up using the same slave cylinder? In you’re removal vid of this engine you mentioned replacing it
I ended up leaving it alone. didnt want to mess with the screw.
Great job! What an awesome car. I'd buy it from you if I lived stateside! ;)
going to make it better
Hey, new to your channel. I’m going to look at a 170k miles xrs matrix. I’m completely new to the platform. Is 170k too high? What should I look for when I go look at it? He’s asking 5.5k seems high to me, am I right?
170k is high for 5.5k, maybe 4500
check for timing chain cover leak and see if vehicle hits lift
Hello i love your videos was wondering if you knew where of if you had a 1mz trd supercharger i really want one for my car but there impossible to find
craigslist or facebook marketplace
Great videos dude...
Glad you like them!
Hello, I have a matrix xrs 2003 2zz-ge, I have problems with the idle, I have thought that it is the vacuum system, but I do not understand the diagram. Could you help me with some pictures of the throttle body hoses, and the vacuum system?
thanks for your time
thanks for always spreading knowledge with these videos! did the brown axle seal have a spring o-ring in it? i was just cleaning a c60 i picked up and a circle o-ring popped out so I am assuming it is part of the axle seal. I didn't see one in yours so thought it was worth asking.
Ya both axle seals are made with those springs.
@@brinho109 thank you!
Yes it does and thank you @nunu nana for the quick response
Hey bro I just got the c60 for my corolla, I was just asking if you have or know where to get the shifter shaft for the corolla because the one I got is off a Celica
junk yard or i guess when i find one at the junk yard
Hi mate question having problem I have Toyota celica vvti mrk7 have original exhaust pipe having problem getting o2 sensor off its rounded so normal o2 sensor wont grip it tried heat and spanner. Havnt got right size bolt extractor...
id maybe try some locking pliers and get it off
my 05 matrix xrs has no compression or very low on 3 cylinders. i found an engine for 2k online, i really want to do the swap! what u think?
Exelente trabajo donde en que parte de California estas
central
@@2zzlow aproximadamente cuanto millaje aguanta un motor 2zz
You’re a legend! 🔥
just a back yard mechanic bro
💯👍
thanks fam!
Do you know the pilot bearing part number?
I don't, it came with the kit.
that boi joseph a real one ☝️ lol
he truly is
Hey cbass. Where can I get the hooks and bolts for the hoist to grab on the motor
1998-2002 Corolla from the junk yard, they have them pre installed from the factory
Planning to mod it? Exterior/performance
Just finished recording TRD muffler install…stay tunned
@@2zzlow aye I got a trd muffler too, can't wait to hear what it'll sound like compared to stock, love the vid man can't wait to see the matrix grow❤
Can I put a 2zz in my 05 matrix xr
This noise in idle is healthy and normal? Sounds like mine (2zzge) maybe need valve adjustment? Is nessecery or not?
these engines are loud, mine sounds the same with over 250k miles
@@2zzlow OK thank you mate for reply! Generally have issues with intake wear cam?
The vvti sprocket wears out over time and you will get a rattle for like 1-3 seconds on start up. Easy fix but very common honestly
@@2zzlowunderstand, and something else mate need valve adjustment this engine or not?
Can’t adjust the valves. I believe you need to install thicker shim buckets for the valve caps? I haven’t really dug deep into those areas with the 2zz.
Wait isn’t it expected to not drive the car harsh after installing as new clutch ?😂
Lol 😂 just wanted to verify that lift works but you are 200% correct
@@2zzlow shit, LIFT works anyways so fuck itttttt 🤞🏻