DIY Ultimate Cornhole Boards with lights and speakers
HTML-код
- Опубликовано: 8 сен 2024
- Easy Cornhole Board Plans:
www.oxinthesho...
This is the Ultimate tailgater sport fan cornhole boards with a little added bonus. I have wanted to make these for a while now and I finally got around to them. I think they turned out awesome. Since the boards are engaved we had to use a selfleveling countertop epoxy so they would still work like they are supposed to. I hope you enjoy the video and think about subscribing and clicking that like button.
/ oxintheshop
www.oxinthesho...
/ oxintheshop
/ oxintheshop
Javi’s Woodshop
/ @javiunboxed
Part Time Cameraman
/ therealgoatpro
CornHole Board stuff
Lights amzn.to/2wtlpGd
Countertop Epoxy amzn.to/2wt0jHZ
V bit amzn.to/2wsMN7e
Bags: amzn.to/2Dw2weK
Lights: amzn.to/32qLI3x
Scoretower: amzn.to/3epw0ru
Tools:
Sawstop: amzn.to/3a47quW
Irwin Clamps: amzn.to/3ftBy5y
Dewalt Drill combo: amzn.to/3aLieOt
Grizzly Bandsaw: amzn.to/34Nl5oz
Dewalt Miter Saw: amzn.to/385xe81
Festool Dust Collector: amzn.to/3dzfbLu
Kreg Jig: amzn.to/2SylbKS
Small Kreg Screw box: amzn.to/2Hjoe4c
Bulk Kreg Screws: amzn.to/2P1DZkX
Ryobi Jigsaw: amzn.to/3cGt89B
Music:
1st song
Rock Angel by Joakim Karud / joakimkarud Creative Commons - Attribution-ShareAlike 3.0 Unported- CC BY-SA 3.0 creativecommons....
Music provided by Audio Library • Video
2nd song
JPB - High [NCS Release] • JPB - High | Trap | NC...
SoundCloud / anis-jay
Facebook / jayprodbeatz
Twitter / gtaanis
Instagram / gtaanis
3rd song
Life Is by Cosimo Fogg (201) / cosimo-fogg
Creative Commons - Attribution 3.0 Unported- CC BY 3.0 creativecommons....
Music provided by Audio Library • Life Is - Cosimo Fogg ...
4th song
We Are One by Vexento / vexento / vexento
Music provided by Audio Library • We Are One - Vexento (...
Tools and Video Equipment
Easy Wood Tool Rougher amzn.to/2sJWCAr
Easy Wood Tool Finisher amzn.to/2uO9qm4
Easy Wood Tool Detailer amzn.to/2utVKx0
Nova Lathe Chuck amzn.to/2stp8lO
Dewalt Miter Saw amzn.to/2nVIi4Q
Grizzly Bandsaw amzn.to/2nVA5h5
Dewalt Planer amzn.to/2mGloOS
Grizzly Drill Press amzn.to/2nYnV7m
Dust Deputy Cyclone amzn.to/2mGfCgh
Bosch Router amzn.to/2nlO3Wz
Dewalt Drill Combo amzn.to/2n7pdYS
Delta Table Saw amzn.to/2n7sLdD
Ryobi Brad Nailer amzn.to/2nqWbGV
Irwin Clamp amzn.to/2nYs2QZ
DJI Phantom 3 amzn.to/2n7qzTx
GoPro Hero LCD amzn.to/2n7EKrx
Disclaimer: This video contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. Thank you for your support
Incredible workmanship! I just made two boards with UGA laminates, lights for the holes and 2 Altec Lansing paired Bluetooth built in speakers.
I’m throwing both boards away after seeing your two boards…
Probably one of the nicest sets of boards I hace ever seen
Thanks and that is awesome I’m glad you think that. I was trying to just make some no one has seen and I think/hope that’s what I did.
Just one word.................Beautiful!!! Awesome Job!!
Thank you tony
Everybodys like yea I can build that......then he whips out the cnc machine.
yea had to step it up a notch
a notch???..like 100 notches!!!..lol
toolman101476 right 😂 I was thinking the same thing.
You can get small shop CNC machines for like $6k.
They are not that expensive.
Ox In The Shop....a notch? that kind of work is not in the ordinary guy's orbit...
Just stumbled on this video. Being a Georgia boy myself I had to check it out. Gotta say those are the most well thought out and most insanely awesome set I’ve ever seen!.... GO DAWGS!
Thanks Chris I’m glad you like them. Go dawgs sic em
That's a nice Green Bay packers board ;)
Lol your funny go dawgs
Dang that's the nicest set of cornhole boards I've seen so far, excellent job bud!
Thanks so much ray thanks for watching
that CNC design/operation was pretty amazing. As a DIY guy...got to admit those CNC machines take projects to a whole different level. I haven't really looked into the cost of them, but i such a idiot with computers (yes, I'm a bit older) I have doubts I could ever get the graphics/design part of it down well enough to actually make something cool with it. Awesome boards though !
Drew, you should have.....just kidding. Honestly, the coolest set of corn hole boards I've seen yet. I love the video! But kind of hate it at the same time....it adds a project to my ever growing list of projects. When I make mine, I'm hoping they look half as good as these do. Awesome job!
thanks Devin, I am glad you liked the video and i look forward to seeing the ones you build. thanks for your support as always
The best design I’ve seen yet. Better than my cornhole board builds. Great job!
lol Im sorry. Im sure yours are awesome too. thanks for watching
I didn’t know any Georgia fans had the brain capacity to do something like this. Good to see
if those were my boards they would be hanging on the living room wall! great work!
Lol thanks
LOVIT ! Better then the few I’ve made with LED LIGHTS but the CNC just went over the Top Dude !
Thx’s for Sharing from St Joseph, MO.
The cnc was intended to be over the top. Thanks for watching
Awesome boards and the CNC machine really finished them off nicely! Subscribed!
Thanks glad to have you
Pretty sweet cornhole boards. Love the storage compartment and the led/music upgrade. The design wether you're a UGA fan or not should be appreciated. That style could be made with any team.
ManCraftingTM thanks chad I always enjoy reading your comments because they are unbiased and read in a way that is appreciating the work as well as helping others appreciating it as well.
Everyone always has something to say, no matter what team you do!!!
#RTR🐘🐘🐘. lol 😂
Sweet Drew!! Lots of fun with Cornhole as it is but with the way you made them , the look the light and the music, just adds to the excitement. Great job Bro.....
OVER THE TOP
Great job! Now it is wide open to other team designs.
JK's Timber Scraps thanks and yes that is true
Those boards are sick! YOU took that to "anubba lebbal "!
haha no sure what that means exactly but thanks
Those boards are freaking awesome!!! Gotta step my game up now!!! Great job!!!
thanks let me know what you come up with
Was going to ask same thing..need to find them anyway
Those are amazing. Great job.
Thanks glad you like them go Dawgs
Great design and build.
thanks chris. they are awesome
One of The nicest sets I’ve ever seen
Thanks
Amazing job!!! I wish I could have a CNC machine like yours…
Looking great man. Just to jump on the impending bandwagon: would have looked better with
That epoxy top looks immaculate.
42Fab - Metalworking and Multi-Medium Fabrication thanks Richard yes they turned out awesome
What a a beautiful set! You could make a nice side business. I would definitely buy a Tennessee set.
Tenn....... im sorry. but yes I do sell them let me know if you want one
@@oxintheshop how much do you sell them for? Thx
All the cnc, epoxy stuff and speakers and then plywood legs. Pop for the $8 for solid wood legs.
Great Job Drew! Nice to see you using Jimmy's Ice Pick! I like the epoxy top, and the playing music when you score is an awesome idea!
Bear Creek Woodworking thanks and yes I use my diresta ice pick all the time
Holy pocket holes Batman!!
Lol yup
Outstanding.
Thanks glad u like it
Awesome build and video! Best cornhole boards I've ever seen! Go Dawgs!
thanks that is awesome. share the video to all your fellow DAWG friends GOOOOO DAWGS!!!!! SIC EM!!!!! WOOOOF WOOOOOF WOOOOOF
Good job Drew They turned out great
Nealons Wooden Treasures thanks Steve I think so as well
That's awesome Cornhole board. Where you get sound box? And was it motion activated when bag went in hole? I'm definitely going have try make a Cornhole board similar to yours. Great job 👍
What sensor was that for the music?
Dude - awesome.
Thanks glad you like it
Good job Drew! That CNC is an awesome tool to have!
thanks and yes it does come in handy
So sick
Nice job Drew! Cool project and outcome.
Mike Kapotsy thanks
Hell yea! Nice build! Best part though, eye of the tiger followed by huge miss 😂😂😂
Lol that is a good part thank for watching
That's SWEET except the PACKERS don't have a bulldog logo. LOL
Lol it is their new logo for the season
Where did you get the speaker? I'd love to add it to my boards
????? Any update?? I would love to know what’re you got the sensor!
Ditto would love to know where to get sensor music box
Go Dawgs!!
Sic em
Amazing
Thanks mason
Very nice work Drew. would you please share where you got the speaker and fight song from.
So the speaker didn’t work that much so I didn’t post where to get
Go Dawgs!
Go Dawgs
Amazing work! Where did you get the sound module? I didn't see the link in the description. Thanks.
I can’t remember but it didn’t work that great
Beautiful boards. What did you think of the epoxy finish as far as play is concerned? Some people say it’s too fast and I’m curious what you think
It fast at all. At first it doesn’t slide one bit but after you play and it gets powder from the bags it works great
Awesome on so many levels! GO DAWGS
thanks so much Ross and yes GOOOOO DAWGSSS!!!!!
I Agree ........ GO DAWGS !!!!!!!!
Glory glory to ol Georgia!!
Go dawgs
Great job, very professional and creative...except...no eye protection???
Neat IDEA except it should be BLUE AND GOLD with a big ND and a Fighting Leprechaun
Lol ND we have had their number the last couple times
Nice boards . But you could put handles to carry them but awesome also.
That would be a good idea
daaayyyyuuummmm...those are badass!!! good job!!
thank you and thanks for watching the video
where did you get the motion sensor and sound machine? Did not see that listed
nice work brother with the cnc work!
Thanks
Nice editing. Love your choice of music. This compliment from 60+ old man.
thanks Dale thats awesome
WOW that's the best I have seen so far.🔥💯👌👍✔🙏
Thanks as far as I know it is the first of its kind
I need a Notre Dame pair.
Email me through my website and we can talk about design and price
Where did you get the sound box from? I’d like to get something like that.
Congratulation for your beautiful job
thanks for the comment and for watching
These are so cool! What a great idea to use the CNC machine! Just curious though how heavy are these!?
Lol Jen they are not light at all. Not sure on the weight exactly but they are a good bit heavier than the regular boards
Hell yeah that's cool! Nice job! You might end up a very busy man, making these.
Paul Granger that and yea idk about being busy because the price of these are a little crazy for corn hole boards
Ox In The Shop what would be the price for these?
Where do you find the cheer sound for when the bag goes in the hole
Can’t remember I think I downloaded it off RUclips maybe
Nice work..
Thanks CAP!
Is it also possible to purchase the cnc laser/router file?
Go dawgs just got you a new subscriber!!!
Thanks Alexander glad to have you🐶
very nice looking set of boards. im wondering how you dealt with all the rough edges after the cnc machine finished? i do alot of routing and always struggle with that. thanks
The v bit cleaned everything up pretty good. But for the couple little spot I hit them with 220 just to knock off the bur. where the arches were a little more rough due to the bit not being the sharpest i used a razor to clean it up. Hope this help but when router a good quality bit goes a long way. thanks for the comment and for watching
Is the speaker actually triggered by the bag going in or is that just computer editing? If it's the former I would love to know how you did that
It is triggered by the bag but only worked half/ quarter of the time
Do you have the link to where you got the hole sound system?
I do not have it but you can find it or something similar with google search. these were a little tricky to get working right tho.
@@oxintheshop You don't have the link to ware you got the sound system? But you have it and installed it?
duuuude those are awesome!! go dawgs!!
Thanks
Great build. Thanks for the video!
The Hamlin Woodshop thanks for watching
That is really, really cool.
thanks
Is the epoxy to slick when playing? Does the bags slide back down the boards?
Actually not slick enough. You would think it would be but poly is more slick
what brand cnc is that??? Awesome job!
Garageworx cnc but I don’t think he makes them anymore
Where did you find that sensor for the music. Thats an amazing touch.
Do u still do cornhole boards? Would like to c how much u would charge to make me a set!
Turned out great dude!!
Southern Ginger Workshop thanks Zach
Any chance you would do a video on how you did the design with your cnc, or share the g code?
yes I could do a video on that
Great looking top but you skimmped on the underneath side. Finish sanding all of it and treat the underneath side with paint or a single coat of poly, just to protect the wood. With the CNC machine you can definitely take cornhole tops to the next level. Beautiful....finish it out tho.
Yea I understand but it was so much work I was ready to get them done lol
@@oxintheshop lol......I understand that. It's a beautiful set tho, you did a great job with it. I'd love one but being on disability, there's no way I could afford something so customized as that. What's something like that run cost wise? I'm sure how detailed of the top is and how much the CNC has to be ran affects the price allot. Again, not busting your chops, its just such a beautiful top that if finished completely, would be the Rolls Royce of cornhole sets. Great job !!! I love to play, just dont get to as much as I'd like to with all the medical issues I got going on right now. Any who, again, beautiful set.
Turned out great man!
thanks and thanks for watching
How did you clamp cow hole boards down on CNC?
With wedges
Best cornhole boards EVER! GO DAWGS! ❤️🖤
Kellie Bevans thanks and go dawgs
Love your videos. Can you tell me what kind of CNC router you have ?
Garageworx cnc
Nice work
Mike Fulton thanks
How can I get a set? GO DAWGS!!!
I do sell them. Contact me thru my website there are not cheap tho
Still sick! I won’t be doing the same. Damn
Thanks I guess??? Not sure I understand
Just sent in a request. Looking forward to hearing back!
What is the PIR sensor that plays the song?
Would not use it again
What is the name of the tool that did the cut out?
Garageworx cnc
Immediate subscribe! Great channel, man!
thank you thats awesome
Awesome boards! Where do you find the motion activated audio box that plays the fight song?
I would not recommend the ones I used because it doesn't work everytime like it should
Curious, do you have to have any special licensing agreement with NCAA or SEC, NFL, etc. to resale?? how does that work exactly? I feel like when you buy the decal you've paid your part, but I've also heard the argument when you do resale they still may want a piece of the pie. thanks
Where did you get the speaker for the board
Online somewhere but it doesn’t work great
May I have info on your engraver? What is the model and specs to fit a 24"x48" board?
Garageworx it is 48x48
how deep did you carve into the plywood? .1 or so? also what plywood is this Birch?
.125 and for those I think I used purebond lol but I can’t remember for sure
I looked on Home Depot’s website they have the 1/2” maple and red oak with the holes already cut but u have to special order... well Atleast in Virginia... bunt with this depth of cut I’d rather have 3/4”
Did you do 2 epoxy pours or a single pour? Looks great!
I did a pour for each board and I think I had to pour a little on each after than to raise it up enough. Thanks
@@oxintheshopDid you pour the vcarved sections first, let it cure, then pour/brush on the top or was it all one pour?
great job!,go dawgs!
thanks go dawgs
Where did you get the speaker that plays the fight song?? That’s awesome!
From an online tailgating website that I had to record the sound too. But I wouldn’t use it again big it didn’t work well and took a while to get the sounds to work for the video
Ox In The Shop thanks for the quick reply and honesty, great video!
How bout them Dawgs!?!?!?!Super sweet build!!! Love the "Glory to Old Georgia" feature. Go Dawgs!!!
thanks Jacob graded you like the build
These are absolutely great cornhole boards. However, I was wondering why you might not have used red epoxy to fill in the design and then just sand/plane/chisel all of the excess off of the black?
That is an idea but I just want the wood to show didn’t want to fill that up with red. That would have been a lot of red. The gs yes could be red but I didn’t want the stadium dawg or arch to be red. If you make one and do that I would look to see it tho.