@@landonsparks5632 Hey bro! Honestly I tune based on trial and error. the goal is to get a low enough RPM to keep engine temps low and to have a good amount of smoke from the pipe. Normally I begin by richening the Low Speed Needle until the idle settles down, then you can rev it some and see how it responds. IF its super bogged down then you gotta lean the high speed needle.
Beautiful run on the Super RS4. How often does one see a vintage Super Nitro RS4 running with a perfect tune! This is tone of the richness of this channel
hey bro! Happy nitro Sunday! You'r right, it's pretty rare, im looking for the correct side exhaust header and will try out a proper pipe for this model, I think it'll get even better!!!
Picco, Rossi, Webra my favorites. Sickening. I picked up the Kyosho from your links a few weeks ago. Its now a hugger orange with black stripes, '69 Camaro w blown faux engine.
thanks man! Im still on the hunt for a proper header for a tuned pipe to replace this stock can muffler, I think then this thing will certainly get even better.
hey my dude!! I did some research and you'r right!! The 4-tec 3.0, the larger model has almost the same height and width wheels and tires. Could be something I'll try to pick up and run this when I get a proper tuned pipe for it. thanks again!
you said it bro! lol. The rubber tires are tryin to revert back to the dinosaurs they came from lol. Depends on if you believe in accepted evolution or not and stuff, but yes. Tires suck. Trouble is they are a very unique larger size and no other model today exists that uses this size.
@nitrogang4416 as long as they're 12 mm hex's I would use them on my slash That's basically what I use it for now is to drift old tires that are bald that I get from the hobby shop I don't get rid of the tires until you can see the insides of them all the way around it's a lot of fun
@@nomusicrc you're totally right, these would be great on a slash for drifting! BTW I'll tell you man, its not easy to respond to comments on both channels, but it's a priority to me nonetheless. Right now im cleaning up the Sportwerks buggy in the sink, tel DAN the MAN that's the update, lol! Prob this or next week I'll be ready for a fireup!
@@nomusicrc 90% is highly efficient bro!! and dont forget I do it on two channels! lol.. Like I always said, it's good enough to be a straight A- student, which I was, and thats a solid 90% right there.> !aha Happy new year man!
hey buddy! thanks for checking out this video, not sure if im interested in trading at this point to bye honest with ya. Im pretty addicted to the RCs I have, lol.
Can't kill a nitro on this channel!
Sounds Beautiful man make nitro great again 💯💯💯💯💯💯💯💯💯💯💯🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥
thanks my dude! Just ding my part you know! Making sure people seek out the nitros and make them great again for us all!! maybe HPI will get the hint!
@ for sure man
How do you tune a 3.3 engine because i was tune the Traxxas way and I’m confused
And I was trying to break it in
@@landonsparks5632 Hey bro! Honestly I tune based on trial and error. the goal is to get a low enough RPM to keep engine temps low and to have a good amount of smoke from the pipe. Normally I begin by richening the Low Speed Needle until the idle settles down, then you can rev it some and see how it responds. IF its super bogged down then you gotta lean the high speed needle.
Beautiful run on the Super RS4. How often does one see a vintage Super Nitro RS4 running with a perfect tune! This is tone of the richness of this channel
hey bro! Happy nitro Sunday! You'r right, it's pretty rare, im looking for the correct side exhaust header and will try out a proper pipe for this model, I think it'll get even better!!!
Picco, Rossi, Webra my favorites. Sickening. I picked up the Kyosho from your links a few weeks ago. Its now a hugger orange with black stripes, '69 Camaro w blown faux engine.
hey brother! glad to hear you picked up a new sickening kyosho from my recommendations! Hope you're out there running rich and loud bro!! NitroGang!.
Great video bro
hey bro!! Hope you're well, I'll be giving you a shut out for the channel in the next video bro, working on it right now.
Great video 👍
thanks man! Im still on the hunt for a proper header for a tuned pipe to replace this stock can muffler, I think then this thing will certainly get even better.
The tires from the Traxxas 4Tec Supra are a perfect option for the “super” series nitro cars like the RS4, TGX/R and the FW
hey my dude!! I did some research and you'r right!! The 4-tec 3.0, the larger model has almost the same height and width wheels and tires. Could be something I'll try to pick up and run this when I get a proper tuned pipe for it. thanks again!
@ I have a set on my TGX! They fit amazing. I should grab some more just to have some backups.
Forgot to mention, be aware the rear set has a wider stance. I had to get two sets of the fronts to fit my TGX R34 shell. The rears are way too wide.
Those tires are so old they've gone from rubber to plastic lol if you have a new set you can send those to me and I will drift with them
you said it bro! lol. The rubber tires are tryin to revert back to the dinosaurs they came from lol. Depends on if you believe in accepted evolution or not and stuff, but yes. Tires suck. Trouble is they are a very unique larger size and no other model today exists that uses this size.
@nitrogang4416 as long as they're 12 mm hex's I would use them on my slash That's basically what I use it for now is to drift old tires that are bald that I get from the hobby shop I don't get rid of the tires until you can see the insides of them all the way around it's a lot of fun
@@nomusicrc you're totally right, these would be great on a slash for drifting! BTW I'll tell you man, its not easy to respond to comments on both channels, but it's a priority to me nonetheless. Right now im cleaning up the Sportwerks buggy in the sink, tel DAN the MAN that's the update, lol! Prob this or next week I'll be ready for a fireup!
@nitrogang4416 That's another thing I love about your channels is you always respond to my comments well 90% lol
@@nomusicrc 90% is highly efficient bro!! and dont forget I do it on two channels! lol.. Like I always said, it's good enough to be a straight A- student, which I was, and thats a solid 90% right there.> !aha Happy new year man!
Hey there I have a 1/8 scale Kyosho mp9 I will trade you for that
hey buddy! thanks for checking out this video, not sure if im interested in trading at this point to bye honest with ya. Im pretty addicted to the RCs I have, lol.