Epson ET-8550 / XP-15000 Paper Jam/Cropped Image Solution
HTML-код
- Опубликовано: 17 окт 2024
- In today's video, I will show you how to fix the Phantom paper jam & Cropped images issues on the Epson ET-8550 / XP-15000 or any other printer you are using that is having trouble detecting the transparent film. This method is for you.
Any questions drop them below, Thanks for watching!
#stayhangry
#dtftransfers #howtoprintdtf #dtfprinter #epsonet8550 #epsonxp15000
All DTF Supplies:
Use Code: Hangry
For a discount.
ET-8550 CISS Kit: hangrymuscle.c...
DTF Ink (CMYKW): dtgpro.com/cic...
DTF Film A3+ (13x19): dtgpro.com/cic...
DTF Powder: dtgpro.com/cic...
Rip Software:
dtgpro.com/cic...
-------------------------------------------------------------------------- Website:
www.hangrymusc...
--------------------------------------------------------------------------
Follow me on Social Media:
/ hangrymuscle
instgram.com/A...
--------------------------------------------------------------------------
To donate to my coffee addiction ☕️:
CashApp $zachwill949
Venmo: HangryMuscle
Email: contact@hangrymuscle.com
FULL DISCLAIMER: I make a small commission on my affiliate links
![Top Epson Ecotank maintenance tips [ET-8550 ET-8550]. Things to keep your inkjet printer healthy.](http://i.ytimg.com/vi/-bp0DeTX35Q/mqdefault.jpg)
Hi I tried the method but my XP 15000 still not accepting it. Is there any other way? Thanks
Hello there! Thanks for sharing.
So do you recommend the XP 15000 or the 8550? I'm a beginner so I don't want to deal with issues beyond my capabilities.
Thanks in advance!
@HangryMuscle Hello, of the two printers, which one is your favorite? thank you.
I just fixed mine!! Pw sensor was dirty as hell. On the 8550 take out the print head and under it there is one screw for the tiny pw sensor . Clean it up, put everything back together and done!! This happened to me because ink was all over the top of my print head and leaked into the sensor. You will know when you remove the dampers and see a ton of ink everywhere.
My issue is kinda different... the A3 paper goes through the rear feed just fine, through the rollers, then the print head slides across the paper, then the paper immediately gets pulled backwards into the rollers and jams the printer.
This happened after I did print head adjustment on the printer... wondering if it's related, can't figure it out yet. This ever happened to you?
Its the same issue, the printer can't detect the film, could be the film, paper width sensor, dirty rollers, etc.
Mine is doing this same issue for 3 days now and nothing is working its this same issue for me as well...
@@diazwifeyy8316 I fixed this issue by using a wet cloth and cleaning the rollers. The white powdery stuff caused the sensor to not feed the paper properly. Alternatively you can put blue tape across the area where the print head will first begin printing.
I have a converted printer Epson xp15 000, but the white ink is not coming out. I put white ink in the red and gray catridge. Do I need to set it somewhere in the software? What is the problem here?
Not often I have issues with my 8550, but when I do... I know where to come! You are a freaking life saver!! You've solved the only 2 issues I've ever had with this printer.
Now, I'm just trying to find someone who can find a way to make a true white dtf powder. Ugh. I have a lot of shirt orders, just not enough to invest into a dtf printer right now. Do you know how much that person could make off of that stuff!? Wish I had the connections cause I dang sure would be finding a way to make it happen 🤣
Why not convert the 8550 you have now into Dtf?
I am having an issue with my Epson ET-8550. It is practically brand new. I took out the rollers using it to print DTF transfers. It is giving me a paper jam error. It reads regular paper fine and I have even placed blue painters tape behind it thinking it was due to thinness of DTF sheets. I've tried numerous cleanings and numerous DTF transfer sheets. It was working fine until it stopped reading one day. It's only a few months old.
Is there a sensor somewhere that is possibly unclean? My rollers are also clean and my gear on the right side of the roller is lined up as it should be.
Please help
Hi, there can various reasons for the jam, you can sign up for coaching on my website, I'll help you troubleshoot it and show how to fix it. www.hangrymuscle.com/products/dtf-technical-support-for-epson-et-8550-xp-15000-acrorip-50-hour
Thanks! Can't wait to try this when I get home. I've been down for two days. I tried the tape on the non-printing side with no luck but I guess I didn't put it low enough.
This is a better way.
ruclips.net/video/bE9xLguBjuU/видео.html
If the tape method has stopped working, do you have any other suggestions?
I have printed on the same film and had no issues - all of a sudden today I got this issue. what is the deal with the printer that it's worked find for 10 prints in the last week and today, out of nowhere, this issue arises?
This was so incredibly helpful. Thank you so much
Where can I get that big dtf film
Have you tried using a Rubber Rejuvenator spray (sold ag walmart, etc) on the pinch rollers that grab the sheet at the beginning of the print? Perhaps the film is leaving residue on those rollers and they are not able to properly grab the film because there is not enough friction. The rubber rejuvenator works flawlessly on my laser printers whenever i begin to have feeding issues. I just spray it on a rag, and then clean the rollers with the rag and you will see and feel the tackiness return almost immediately to those rollers.
No I haven't but I will pick some up today. I'll let you guys know how it goes. Thank you. Acrorip might be the issue because I could print fine in cadlink.
@@HangryMuscle did you get to try the rubber rejuvenator? If so did it work? BTW your tape trick fixed my issue too, so much appreciated!
@@HangryMuscle funny thing,I'm thinking Acrorip could be the problem..I've followed crafty,she uses cadlink and 8550 ..she was up and running never had this problem.
Could it be a glitch with the templates files?
What's wierd is I was using acrorip without issue for 2-3 months now with no issue. Now it does this jamming thing with or without the tape I'm unsure of what to do next.
@@cjbutler4326 I fixed it without the tape. You have to clean the rollers. You could use like a wet microfiber cloth or wet q-tip and just clean the rollers. I had to restart the printer a couple times to get them rolling so I can thoroughly clean. Each time the print jam error occurs, I just clean it again and it works.
That blue tap process has to be done on each impression or just once
If you're the tape it would be done everytime. I "DO NOT USE TAPE" nor do I recommend it.
I am using Cadlink what paper setting you are using for the epson et-8550 printer and on cadlink
I don't use cadlink, I used the trial though I set everything to default
This fixed my issue, thank you! However, I'm still getting smudges/lines randomly in my print. Can you help with that?
Sure, you can make an appointment here. www.hangrymuscle.com/products/dtf-technical-support-for-epson-et-8550-xp-15000-acrorip
How long should I wait until I put powder and to care it
Is there a way to fix it permanently and not have to do that every time?
Do you reuse film for transfers?
No
Hello when I go to print it prints nice and slow at the top and when it gets to the bottom it speeds up and smears do you know why that is
You need to leave atleast 2in of space of the bottom of sheet. If you removed the rollers, there is nothing to pull the film through once it gets to a certain point.
@Hangry Muscle do u think we can convert the P700 like this once v11 rip comes out n a few months?
Yeah once the rip comes out, you can use the P700 for DTF.
@@HangryMuscle what about the ink? Its 10channel, uses the ultrachrome pro10 cartridges. I wonder where to get a conversion kit for that, or a CISS.
I'm not familiar with the p700 model , I assume you use the same conversion as the p600s & p800s. You can find refillable cartridges on alibaba/aliexpress.
@@HangryMuscle @Jeremy Moon Good night friends! Not yet, need a chipless firmware, it'll take some time to be made
Pretty sure, you use the chips from the oem carts and put those with the chips on the refillable carts.
can you help me fox issue, how do I fix error 034004. I put tape on film but it came off went under rollers and remove on top surface trying to take tape off the roller but now I am getting error on epson et 8550
Hi, I would need to troubleshoot your issue to assist you, you can sign up for a DTF coaching session on my website.
*Please keep in mind most issues for new printers take about 30-40 minutes to troubleshoot and resolve
www.hangrymuscle.com/products/dtf-technical-support-for-epson-et-8550-xp-15000-acrorip-50-hour
Do these issues happen with cadlink at all? Are you still using it? Can you show us how to clean rollers? Im having paper jam issues with the same film I been using its been 3 whole days nothing is working it will feed a regular paper just not my film anymore.. im doing tape techniques that were working fine and now it's doing it with or without tape.. I have watched so many videos posted in forums and can't get it going 😭 please help? 🙏
@Mark Adams Where do you do that?
Worked like a charm..thanks a million
My tape came off and now I got an error 034004 and it may be stuck inside the printer. What do I do
www.hangrymuscle.com/products/dtf-technical-support-for-epson-et-8550-xp-15000-acrorip-50-hour
Have you dealt with an error 000025 with the Epson ET 8550
Having the same problem... Did you get it resolved yet?
Will you have to continue to do this process?
I tried to add the blue tape but it’s still not reading plus I crop it.
is the RIP software absolutely necessary ? can I just print from photoshop?
Yes a rip software is necessary. Photoshop doesn't allow you tell the printer what ink color is in which ink channel and it can't tell the printer to print a white background layer
Hi Z..how difficult is it to remove the printhead..and clean the sensor? ET 8550
Not at all. Just need a screw driver
@@HangryMuscle thanks ,I'm gonna try again later I've bought blue tape and white tape, also I'm searching for head removal videos..somehow I think the head is still good,and I don't want to touch it yet..it's frustrating though almost at the point of giving up
how do this help crop image issue
My printer fed 14 films through no problem with tape or any adjustments, now it is doing this. 😟
Do you have a solution for smudges once the paper finally goes through?
You most likely have old ink residue underneath the printhead & I would also double check the exit tray is leveled.
@@HangryMuscle Thank you.
Yup.just take a paper towel with diluted alcohol and run the printhead over it a couple times manually and also clean the sponge and the area around it. And most importantly clean the squeegee.it’s usually the main reason for smears on the paper.my experience anyway.
I have a big issue my printer is new and they print like 8 images and then beginning printing only in the middle I cleaned I do everything to make it work but still doing the same any suggestions plssss
hola como estas? limpia el encoder horizontal, esta copprobado en este taller que las manchas de vaselina en en el encoder horizontal generan esa falla. saludos
Now my printer isn’t even working with the tape any suggestions
I have had the same issue with my ET-8550 that I'm using sublimation ink with. I found a fix for it and maybe it will help others. When I let my printer go to sleep. It would start doing this, eating the paper consistently. I set my timer to 1 minute in the printers settings (on the printer itself, not on my PC). I let it fully go to sleep, then turned it back on and bam. Now it doesn't jam.
I have accidentally let it sleep a few times after now and every time, it eats the paper, every time I let it sleep again and it starts printing properly again. I set my timer to 60 mins now so even if I leave for a bit it won't sleep again. I always power it off with the power button, no more sleep mode ever.
My model of printer is an ET-8550 but it's black, not white, so maybe it might be slightly different. Hope it helps someone in the future however. Of course I'm not doing DTF so it could be a common error but with different solutions. Thanks for your videos.
Regards, Red.
This worked!! I was about to lose my mind!!
That's great to hear. Banged my head against the wall so long before I found this solution. Happy it helped at least just one person. @@blackdaisydesigns9832
I have tried this and it's still coming up paper jam. Any Ideas 2 days now and i cant print.
www.hangrymuscle.com/products/dtf-technical-support-for-epson-et-8550-xp-15000-acrorip-50-hour
Hi i would need to troubleshoot it, so i can tell you how to fix it. www.hangrymuscle.com/products/dtf-technical-support-for-epson-et-8550-xp-15000-acrorip-50-hour
How do you fix cropped images .?
Thank you so much it work
Awesome, thanks
No problem!
Hangry Muscle, you should show us how does rip software work on Mac or reviews about it 🙂
Acrorip does not support Mac also I don't use Mac. Check out this rip , it supports mac. dtgpro.com/cicproduct/devstudio-rip-a3pl.php?afl=3277
Another option is to download windows parallel on your mac so you can use any of the rips. This is the site www.parallels.com
It's been 48 hours no printing because of the paper jam I cleaned the rollers, used tape...still no prints
Hi, the tape needs to be "exactly" where the printer starts printing and it should be across the entire film
😊 Thank you so much
You bet! 💪🏾
I have issue with L8180 error code
How do u get A3 paper to fit in rear feeder on 8550
By Adjusting the the blue / black sliders in the rear tray feeder. Are you referring to the ET-8500?
Yes. I purchased my paper thru dtfpro but it doesn't fit. I don't think it's the right size paper. It was in the kit I purchased. I'm familiar with the 2 sliders in the rear.
The ET-8500 doesn't print A3 paper, you would need the ET-8550 to print A3 paper. The 8500 can only print up to 8.5 x 11 paper.
Well that would it explain it. Lol. I do have another question. The first time I printed all was fine my paper came out perfect now my paper starts printing perfect but when it get to the bottom the paper starts going all over the place messing up the transfer. Any ideas?
Did you remove your rollers?
You can save a lot of tape by only applying it on the edge of where it will feed through. You only need about 3cm worth n it will register it no issue
Where exactly do I put the tape?
Did you ever had the printer start printing in the middle and only print about 1” wide
That's the reason for the video. The film is not being detected by the printer's paper width sensor and needs to made more visible in order to print.
I’ll try it thank you for the video and info
It didn’t work for me I will make a short video and post it and I’ve made a RUclips video before either
Where you put the tape matters, needs to exactly where the printer starts printing
@@HangryMuscle so the tape helps the sensor pick up where the print head to start printing
What if the tape doesn’t work 😩😩
You can sign up for a hour tech session, we can go through figure out why its happening then make the adjustments to resolve it. I haven’t used tape in over a year. www.hangrymuscle.com/products/dtf-technical-support-for-epson-et-8550-xp-15000-acrorip-50-hour
Okay
I the the same thing . Tape 💪🏽
Haha only thing I found to work consistently with Acrorip. What rip are you using?