Epson EcoTank ET-8550: DIY DTF Exit/Output Tray ($5)
HTML-код
- Опубликовано: 7 сен 2024
- In today's video, I will show you how to make your own DTF output tray for Direct-to-film transfers.
How to remove Exit Tray:
• Epson EcoTank ET-8550:...
Where to buy the tile:
www.homedepot....
#stayhungry
#dtftransfers #howtoprintdtf #dtfprinter #epsonet8550 #epsonxp15000
All DTF Supplies:
Use Code: Hangry
For a discount.
DTF Ink (CMYKW): dtgpro.com/cic...
DTF Film A3+ (13x19): dtgpro.com/cic...
DTF Powder: dtgpro.com/cic...
Rip Software:
dtgpro.com/cic...
-------------------------------------------------------------------------- Website:
www.hangrymusc...
--------------------------------------------------------------------------
Follow me on Social Media:
/ hangrymuscle
instgram.com/A...
--------------------------------------------------------------------------
To donate:
CashApp $zachwill949
Venmo: HangryMuscle
Email: contact@hangrymuscle.com
FULL DISCLAIMER: I make a small commission on my affiliate links
Thanks so much, I figured you got the tile from there and had it cut. I asked on your last video and now I know!!
This is the best video. The details are amazing. Thank you.
Glad it was helpful!
I have the XP-15000 but printhead is gone. I'm thinking of buying this 8550 or another XP-15000. Which one would you recommend, the XP-15000 or the ET-8550? Thanks!
I have no experience with any T-shirt design machines. I’ve been doing my homework and landed on your page the 8550 is the jump I’m looking to make. What do you think? Keep up the great work. I like your diy style very diy no Flashiness👍
I had absolutely zero knowledge about printing or making tshirts prior to starting DTF, if you have the patience and are persistent, you'll get it and do great. Thanks dude, just getting it done, one way or another, I'm sure you know how it haha.
Thank you for this video im using a 3880 im going to try this
How did you remove the output try
So I converted my 8550, by way of your video. I printed successfully several times now my white ink is basically pooling on one side of the images now but not all of them and only on one side I can send an actual video of what im talking about
ruclips.net/video/y_49xu3cuoc/видео.html
I did it and after a few pages i have problem with error 000143. When i put everything back exit tray can open only to half position and error 000143.
I have been watching your videos. I have been trying to locate this printer. They are nowhere to be found. Been looking for a couple months.
Thank you for sharing your tips. 😊
Same here. Hoping to get one for MSRP soon. I can't bring myself to pay the $1300-$1500 I see them listed for on eBay.
They sell out fast, but you have to keep checking epson, dell, office depot max
Best Buy has them here.
$549 on Amazon next day delivery depending on where you live
Im just getting my printer & set it up how you said in your video but when i print it either prints a straight line or it smears what do i do?
Its ceramic tile?
Can it be used with 15000
Any idea on smeared image ? I’ve cleaned head and wiper blade. Still smearing and cutting off my image even after taping the paper
It can be for various reasons, I would need to troubleshoot it to tell you
What are the measurements I need for the tile
He tells you in the very beginning of the vid
For some reason the white is not printing behind the color. I am using acrorip. What do you think could be the reason ?
Do a nozzle check , do you have white? If not run 1 or 2 printhead cleans. Then check back.
@@HangryMuscle yes i set up exactly like you did in your videos. I also did the tape trick to get it to stop printing half of the image. Should i use the copy paper as well because it is still printing halfway?
Its you're settings, on the print preview screen check "white + color & Print color first" also both white & color should be set to 1.
Can you print on regular paper?
@@HangryMuscle print my design on white paper ?
Video on how printing turned out?
Check my tik tok account.
Is that a standard or wide format printer?
I think is a wide format. Its has a 13inch paper width feeder.
Can you convert the epson 8500?
Yes
He has a great vid with very comprehensive instructions, the best I've seen, and I've watched so many vids from others that do not compare! ruclips.net/video/AexGP9yctaE/видео.html
What software do you use or recommend for dtf ink prints?/than you
dtgpro.com/cicproduct/cadlink11.php?afl=3277
CADLINK is probably the best, but can be a bit confusing. ACRORIP is another great one, and less confusing. You basically need a RIP
Has this resolved your smudges on the prints? Im desperate and trying to get the issue resolved.
Yes, if you need assistance getting setup, you can sign up for coaching. www.hangrymuscle.com/products/dtf-technical-support-for-epson-et-8550-xp-15000-acrorip-50-hour
@@HangryMuscle I'm already converted. Just wanting to find a way to fix the smudge issue before I completely give up.
What did you use for your output tray on your xp15000?
I use a 12x24 inch tile from homedepot
hello how did you take the tray out
ruclips.net/video/hos0j7lMENY/видео.html
What is the largest size you can print with this printer?
Width wise like 12.7 inch. The length will vary depending on what film you're using, sheets, roll, etc.
13x19"
How did you remove the output tray?
ruclips.net/video/hos0j7lMENY/видео.html
Nice idea