How to select the right Spray Tip Size and Type
HTML-код
- Опубликовано: 31 июл 2024
- FFLP - www.spraydirect.co.uk/acatalo...
PAA -www.spraydirect.co.uk/acatalo...
LP - www.spraydirect.co.uk/acatalo...
HDA - www.spraydirect.co.uk/acatalo...
RAC X Guard - www.spraydirect.co.uk/acatalo...
Hi Everyone,
We hope you have enjoyed this video, make sure you subscribe to keep up to date with everything in the spray world!
Please comment any questions you have and let us know what other videos you would like to see.
www.spraydirect.co.uk/ Хобби
Very good! I've been spraying houses since 1979 but I've gotten rusty over the years. These videos are very helpful and I really enjoyed them !
Mannnn, your videos are so thorough but yet succinct! Thanks for the info.
Cheers from Houston, Texas!🙏🏾✊🏾
Thank you! Great information in a tidy package!
Do u have a video that shows different tip sizes shot through the same sprayer using the same paint (to show the amount of paint through different orifices and the speed needed to use these tips)? If not, it would make a good video.
Excellent exposition, especially on how to decipher tip numbers
Thanks, I’m thinking of buying a sprayer and this info is very helpful
awesome info, thank you
Thanks again very helpful. Do I have to different spray caps for the different tips due to the tip seals in the cap? Or is there an easy way to swap them out. Also can you use a FF LP tip to spray emulotion paint on to the walls?
Well done!
Thank you for information.
I have CRACO Magnum X5 TRUEAIRLESS, which tip I should use to paint kitchen cabinets?
Great channel 👍🏻 maybe stupid question but do any make tip fit any machine? Thanks
What is the best tip to use for kitchen cabinets using emerald urethane trim enamel ?
Hey Josh, I've just purchased a Graco 390 and very new to spraying. Would love to know more on spaying. What types of paint ie satinwood, can I use small amounts for doing trim etc. using emulsions and masking up
CAN I APPLY THICK DECK PAINT using an X19 and an available spray tip? Thanks
Josh, can you use a Wagner HEA tip on a graco unit?
Awesome tips. Pardon the pun
thank you
Thank you for information
I have a question, I have some paint that states 0.19 thou minimum for airless sprayer. Can I go lower to let’s say a 317 tip? I’m new to this so just trying to get my head around it 😂
I'm looking to reduce (control) my paint output in order to spray the INSIDE of kitchen cabinetry without sagging the crevices and corners... I'm using an industrial waterborne clear over a previously applied tinted primer. My titan sprayer shoots at 1700lbs max but I'm hoping to choke that down a bit. What tip would you recommend?
309 I believe would do the job just fine.
Nicely presented. I'm spraying kem aqua waterborne laquer with a 310 fflp tip. Graco. 495.Does 1400 psi sound about right for cabinets? The data sheet says to use 12 to 15 tip but I was afraid of a rougher orange Peel look. What do u say? Thanks.
Dave Medley thank you, really hard to say as there are still a lot of variables. What I’d do is get a bit of scrap to practice on. If you haven’t check out the video on setting up an airless unit 👍 hope this helps- How to setup your Airless Paint Sprayer ruclips.net/video/lTUZw5PxhbU/видео.html
nice video: Question. if using the 414 tip you mention and its too big and you go to a 210 (not a 214). would you thin the material a little bit more to aid in the flow of paint through the smaller orifice?
Philip Beckwith yes quite possibly, If you want to spray it neat I would try that first but you may have to thin.
What tip I should use for paint the walls of my room I just got the TC PRO sprayer cordless your advice will help !!
5-15 is the most standard
Wht is 413 tip good for??
What tip would you recommend for a stain instead of paint
TheJpassarella what are you spraying on to?
The paint manufacturer suggests a tip between .025-.036 which tip I should get I already have 515. Iam new at this thanks.
Fernando Salas that sounds like a fairly thick product?! Essentially the paint manufacturer is saying you need a tip that ends in at least 25, so a 525 for example. With a tip size that big or bigger, should you need it, you would need to check whether your machine would actually pump this product. What machine do you have?
Spray Direct graco x7
Fernando Salas the Graco Magnum X7 will support a maximum tip size of .017. I don’t think it will pump the paint you are looking at.
Spray Direct OK thanks
Spray Direct one more thing the paint manufacturer also says a psi of 1500-2000 the x7 has up to 3000psi.
👍👍👍👌❤️
What tip to spray a door and trim
What are you spraying?
My F(king head is pinning sounds like they’re all the same 🤯
😅😊😊😅
We need just tip size number not only sambal
They should give these to all of us who own and extension, not have to pay over $100 for a damn valve..
Rajesh