CREOS PS290 0.5MM FULL REVIEW
HTML-код
- Опубликовано: 27 авг 2024
- HI EVERYONE WELCOME BACK TO THE CHANNEL
IN TODAY'S VIDEO I WILL BE TAKING YOU THROUGH A FULL REVIEW ON THE CREOS PS290
THANKS FOR WATCHING SEE YOU IN THE NEXT ONE 👊
AVAILABLE FROM
WWW.AIR-CRAFT.NET
![[AIRBRUSH] Procon Boy LWA Trigger Type Double Action 0.5mm★PS-290](http://i.ytimg.com/vi/nnwgktd1zdM/mqdefault.jpg)
Just ordered one of these to cover larger areas on my backgrounds and also for varnishing 👍
Thanks for the nice review. Your explanations and display of how this brush works are valuable. Thanks again.
Your welcome glad you liked it 👍
Rob.nice little gun to do spot repairs.
I’m going to look into it and hopefully get one.
Thanks again for sharing.
If you have facebook sales I spotted a ps290 on there for around £80 which was a bargain as they are around £150 worth a look 👍
If you was after a bigger gun for spot repair give the iwata impact junior a look as well I also have one of these great gun
If you want a good review on it have a look at tonys Refinishing he did a review on it 👍
@@dredfxcustompaint
Thanks. You know the black Hyundai Tony just finished.
He called it the Salvage car.
that was mine.
@@dredfxcustompaint
I’ll have a look really appreciate it.
Thanks again
@@billplant2020 I seen that at tonys when I went over there he has done a stunning job for you 👌
Just got it. Great vid. Great airbrush. Thanks!!!!
Nice one enjoy
Can't wait for mine. Thanks for doing this review sir.
Glad you like the video and yes you will love the ps 290 great brush 👍all the best dredfx
@@dredfxcustompaint this is going to be my first airbrush upgrade. Glad that I run into your review. just waiting for the item to be ship here. thanks for doing the review! Really appreciate it! 🤙😉
WOW that is a bit of a beast, you could use that for doing smart repairs on cars 😂 very nice gun though Rob and I think that one might be what I need for painting small parts or as you say alloy wheels.
The wheels on my SLK are highly polished then clear coated but they are corroding and the clear is lifting, I'm not sure how to tackle them at home as if I want them polished again then they will need a complete strip and polish before DTM clearcoat. The only other option is to sand them and fill the corroded parts then colour them with a base, any ideas would be appreciated Rob 🤔 thanks mate 👍
Sand back and paint silver mate when you have the polished rims all it takes is a stone chip and it will do the same again thats what i would do 👍
Yeah you are right it's the best way but I do love the wheels on my old SLK plus they are quite rare so I've been told but for a DIY job the base and clear is best. I'm in the middle of detailing the car, just stripped all the old wax off and used a fallout remover, next is a clay bar then compound and finish off with a quality ceramic coating.
Good review. Been looking for a good .5mm fan gravity fed airbrush and this looks fantastic.
It's a great brush 👍 thanks for watching ✌
Just arrived, looking forward to using this to spray primers and clear coats. I haven't used it yet due to the wet weather here, but the quality out of the box in my hands is the same as Iwata.
@@MK-yu1di nice one 👍
Hey nice review! Any advice on dealing with tip dry when using this specific airbrush?
Hi I cannot say I have ever had tip dry with this the only thing you have to keep clean is the caps especially the fan cap
The two air holes can get blocked sometimes but I usually soak the caps in thinners
Great gun , what compressor would you recommend ? I have a 150 litre for my mini guns but looking to get into a few air brushes
@@lockstocky2800 use your big compressor that's what I do for my studio and just turn the regulator down
Do you plan to buy/make PS-275 review? It's both - similar and very different beast from what I've seen and would be interesting to hear your opinion on that one.
Hello, I really hope you see this message and help me. I have just had two PS290's through my hands in the last few days and both have a bad fan spray pattern. They both give a strong top and bottom line with very little paint in the middle, sprayed at 20 & 30 psi. Is this normal for the PS290? I see your one also has a very uneven pattern. Do you think the Iwata Hi-Line HP-TH would give a better fan pattern? I sprayed lacquer on furniture with a fan gun for many years, so know what a fan should look like. Hoping you can help.
Give the cap a good clean on the air holes for start off then thin the paint down a bit then spray and adjust your pressure see what happens. To get a clean fan you need to be spraying about 3 inch from the panel you should get the pattern to around 2 and a half inch hope this helps 👍
Love my ps-290 for coverage, was hoping to spray the createx uvls clears and lk topcoats but really struggles with them despite reducing. Any chance of a strip down and clean video?
Now that sounds like a plan my 290 needs stripping down leave it with me 👍thanks for watching
Does your air compressor have a high CFM? If this is like the Iwata TH airbrush it requires a CFM above 1.2 for the fan pattern I believe.
I got this aurbrush little brother the ps 275 and its a wery nice airbrush. But I feel like this is more like a mini spraygun.
It's a great brush 👍 Nice fan pattern
@@dredfxcustompaint Cool but I guess this fit more for people that spray large areas. Maybe people that build a lot of 1/16th scale tanks or 1/32th scale plane kits.
@@statoilbensin2190 yes great for getting that bit more paint down 👍thanks for watching and the feedback
Entre gastar un iwata th y mr. Hobby me voy por este
this far behind 🤣🤣🤣🤣🤣
Nice to see you again mate thanks for the coffee 👍