Question is there a big difference from a 78 gauge to a 87 gauge ?? Can i use orginal connection, i notice my 78 gauge has a electrical box for speedo but the newer gauge has a cable connector? I build my truck from parts truck so its kinda hard to justify
What specific wire did you tap in to from the gas speed sensor I bought cheap eBay harness and the under dash portion of wires says it’s the white one would I run that to my speedometer spot?
Fixing to start my first ls swap and gathering parts was going to run the digital gauges you had please tell me the problems you had and thank you your videos helped me decide to do swap
So quick question since you’ve already went out through their wiring. I have a 84 c10. All gauges work except fuel gage. Looks like there used to be a passenger tank but it was removed. 2 wires hang outside the gas tank. Red and black. No wire is coming down the frame on either side for fuel sending wire to go to either instruments panel or bulk wiring near brake booster. I do see pink wires in bulk wiring. There is 2 smaller pink wires 1 pink and the other pink and white. The pink and white is cut and he pink is wires with one of hot wires goin to battery. If I connect the fuel sending wire to either one nothing happens is stays the same. I know the gage work it reads 3/4 no power way past full with power. Do you think wiring that wire to number 7 and 18 or just one of the 2 would fix my problem
would the '90 fullsize Jimmy have the same electronic speedo? Also is the first page of colour coded wires the '84 trucks schematic, or the '90s truck schematic?
Well man I have watched almost every video.. And I must admit...all been pretty good..but... Of ALL the things ive seen.. A Cardinals fan?..haha..jk..well.. Sort of
Is there any way I could use the older mechanical Speedo cable instead of that electric box? I have a 700r4 transmission but I want a cluster with that Speedo and a factory style tac and a gas gauge in the corner. Any advice?
my friend thanks for the help, I was looking for how to identify the cables, your explanation is excellent
Thanks Lonnie we just finished up the cluster on my 80c10 swap.
Lonnie Do I need to repin everything like you did with my 76 K10 ..I have the same cluster but just the speedometer ? Thanks
Yes
How do I wire up the speedometer. I tried using the speedometer wire from my aftermarket harness but it didn’t work
You may need to contact your harness supplier
Question is there a big difference from a 78 gauge to a 87 gauge ?? Can i use orginal connection, i notice my 78 gauge has a electrical box for speedo but the newer gauge has a cable connector? I build my truck from parts truck so its kinda hard to justify
Not sure. I know the 91 suburban cluster has an electronic speedometer
I have a silverado 92 and I put a 2000 dashboard on it and I want to change the cluster from 1992 to 2000 how do I connect the harness pins
If you don’t mind me asking what did you not like about the Intellitronix brand gages? What made you decide not to continue using it?
Skip to 4:00 :D
Christopher Ryan U mean 4:25?
Great explanation once I sat through it. Looking forward to Video 2.
What specific wire did you tap in to from the gas speed sensor I bought cheap eBay harness and the under dash portion of wires says it’s the white one would I run that to my speedometer spot?
My set up is drive by cable
@@LonniesGarage I’m sorry meant vss speed sensoe
Fixing to start my first ls swap and gathering parts was going to run the digital gauges you had please tell me the problems you had and thank you your videos helped me decide to do swap
So quick question since you’ve already went out through their wiring. I have a 84 c10. All gauges work except fuel gage. Looks like there used to be a passenger tank but it was removed. 2 wires hang outside the gas tank. Red and black. No wire is coming down the frame on either side for fuel sending wire to go to either instruments panel or bulk wiring near brake booster. I do see pink wires in bulk wiring. There is 2 smaller pink wires 1 pink and the other pink and white. The pink and white is cut and he pink is wires with one of hot wires goin to battery. If I connect the fuel sending wire to either one nothing happens is stays the same. I know the gage work it reads 3/4 no power way past full with power. Do you think wiring that wire to number 7 and 18 or just one of the 2 would fix my problem
Can you tell me how to disconnect the cluster circuit from the speedometer of that 91 cluster? Regards!
I'm not sure sorry
would the '90 fullsize Jimmy have the same electronic speedo?
Also is the first page of colour coded wires the '84 trucks schematic, or the '90s truck schematic?
Will this be the same on a 73 k5 blazer? Or other wires needed to be removed , added or removed?
Thanks
Are u ls swapping?
Yes swapping 6.0 4l80 np205
And thank you for replying to me
Well man I have watched almost every video.. And I must admit...all been pretty good..but... Of ALL the things ive seen.. A Cardinals fan?..haha..jk..well.. Sort of
Lol
which wire goes to vss,mine has a twisted pair
www.lt1swap.com
👍
Thanks For Watching. Please Sub if your not already and If you like the video or it helps please Share it.
how did you hook up the alternator wire ????
James Torrez it's hooked to the bulkhead
so you ran a wire from the #5 alternator wire to the bulkhead of the truck under the hood ???
James Torrez yes
Is there any way I could use the older mechanical Speedo cable instead of that electric box? I have a 700r4 transmission but I want a cluster with that Speedo and a factory style tac and a gas gauge in the corner. Any advice?
They make a part that will screw in to the transmission that will allow you to run your vss wire to it.