I did say many other youtubes not ALL youtubers, sorry for the confusion. It seams to me in order to get free samples you have to hide the bad points. I value credibility over handouts and by the sounds of it you do too so all good :) Love your vids by the way dude. At a side note, I wouldn't turn down freebees so long as I can be 100% honest, that's the deal I have with banggood :) I have many brands contact me most days offering me free stuff and when I tell them I'll only review if I can be 100% honest and show bad point too they go all quiet!
Weird. My outcast came built way different than this one. Metal everywhere and a lot different battery box. I love my outcast and thank you for reviewing the outcast. Love your channel brotha.
@@BananaDucshortz I mean it makes sense with suspension arms, Everybody knows not to run aluminum arms cause they'll bend. I look at the chassis the same way. Still love my v3 kraton though. Every time my cousin and I go out the 2 trucks that ALWAYS come are the kraton and xmaxx..... But I can't wait to get a 4s outcast.. Sometimes I don't feel like lugging around my xmaxx for a bash session and a smaller truck would be nice, Seems to fit the bill.
I bought one 4 weeks ago. driven it 4 times. First time broke the right rear a arm. second run with replaced a arm, all good. the third run broke rear left a arm. replaced it. 4th run broke the chassis after landing on a corner of jump right in the middle of the chassis. It was my first arrma, and i'm honestly a bit disappointed. It is a fun truck, no daubt. But not as tough as i would like. I'm a pretty careful driver with my rc cars...
If you are experiencing Delay issues turn on the radio hold down the set button on the ESC as soon as you see the ESC flash red press the set button and leave your controller at the neutral position and then do the same for full throttle and full break I have put a different receiver in there and you get better range love your videos keep it up m8
Threre is converters to convert the connecter you do not need to cut the cables. By the way your my favourite youtuber you taught me a lot about RC cars and I really appreciate what you do for your fans.
Hi Kevin. My name is Scott. 8m in Washington State. I am very impressed with your approach to helping everyone interested in RC goodies. It's great how you show the kits and show people how to work on your cars or whatever. I was looking at some different monster trucks and found a model that you might have a really good time checking out and to see if Stimpy can bust it!!!;) It's called the Carbon Asault. AMain Hobbies has the kit. Thank you for creating the videos you do. They are extremely good information and help people that are not very familiar or just need info on a model they are interested in. plus your videos are helping bring more and more people into the world of RC. I have been running aircraft boats and trucks,cars and so on for 40 years and it only gets better and better. I am curious about this m9nster truck. It looks to be a good quality but you never know. Thanks again Kevin for all 5he great videos!!!:)
in my opinion, the EC% connectors are the best at staying together during hard landings. i dont go hard as bad as you, but i do push my cars. never had one come unplugged. i now change all my ESCs to the EC5s
The Arrma slider plastic driveshafts are a LOT better then the Traxxas ones. The only issue that happens sometimes is the axles come apart because they aren't tightened from the factory
Another good review. About batteries with those type of plug you just need use a good adhesive velcro joint the batteries in position when the cables don't touch together and go for bashing.
Kev like I said in your other video. New servo and hot racing servo saver kit. Turn off punch control and tighten the slipper a turn or two and it'll help the laziness. I love my 4s trucks though. And pick up a full set of spare arms, the arm quality seems a bit inconsistent as my outcast has been to skate parks and BMX tracks no issue but my 4s kraton broke an arm on the second run, I was jumping it hard but still broke with "less" abuse
I can’t wait to see you beat the hell out of that thing. I had the 6s versions , your right about the plastic chassis , my senton 3s has a plastic chassis and that car takes the most beating out of any of my cars. Plastic for the win
I had to rock rollers to there’s a green one and the blue one and the green and the blue one goes fast fingers 40 miles an hour that’s what my dad said and I love your channel
Nice u got the Outcast, I just got one last week too but the 6s version n so far im liking it, U have the Notorious so u already know how the 6s versions run
From the videos I've seen it appears that the 4S Outcast whellies much to easily for my driving skills. I'd prefer the 4S Kraton but would want a more substantial front bumper and the Outcast 4S tires on the Kraton
If the 3s blx system is anything to go by, this will be an awsome basher. We have a senton and a big rock. Both break on a regular basis as does my kraton, but overall they are fairly strong. Give it some welly kev, if anyone can show the weak points you can!! Got agree, the tactic radio is much faster and better quality than the new spectrum it comes with now. Servo's are pants and parts availability is ok if you shop in America.... T-bone bumpers are a good investment, but again only from the U.S.A. and expensive for what you get. As you can see, I'm not an arrma fanboy just like the look of em in general. On the same score, my trx4 is good too but has its faults.... Looking forward to see you bash it to bits!! ATB Andy.
HONESTY is the best policy Kevin..........SEND IT TO THE MOON, PLUTO, SUN AND THE STARS......CRASH IT, SMASH IT, FLATTEN IT, REBUILD IT..............BACK TO THE MOON, HAPPY FLIPPIN N FLYIN
sounds like it ticks all the boxes dude. i had it out the other day again, the delay in the controls is bad and makes it so unpredictable, everyone says its the radio so ill change it out.
@@KevinTalbotTV the STX2 controller sucks 😝. I just swapped in the old Tactic TTX300 👍 and recalibrated. These 4s rigs make a whizzing sound. Sometimes the slipper will slowly loosen up too. Running mine 1/2 turn out from tight 👍. Be careful if you get yours wet. The slipper and rear input bearings seize up easily 👀. Rubber sealed is the way. 🍻
What is better Arrma outcast 4s or the Arrma outcast 6s because I have been to rc for 3 years now and I just want to know which one is better for me. Thanks 😊 🤘🤘
I Have an rc Halstorm tht got run over one time after getting brand new shocks, and to my surprise it's still kicking. I was inspired to get it aftor seeing one of your videos. You alwase know how to fix cars even if they're trashed. (If I reach 100 likes I will link the product.)
Turn up the punch!!! My friend just got one and couldn't figure out why there was a "delay" when you pull the throttle! I think stock it was set to 1 out of 5. And the brakes! There are a lot of settings for the brakes! It's all in the manual, but I'm sure you've already learned that and changed them by now :P
That is my dream rc car!!!! i really really really really want one! but the price in here in Malaysia is crazy expensive and the spare parts are super duper hard to find here too
Kev, please do a review on a redcat everest 10 and compare it to the 200 dollar crawler, and do a review on the redcat landslide and compare it to the outcast
Been waiting for a while for this review. I bought the Kraton 4s, replaced servo and radio just after box was opened. Great review. I look forward to seeing what you get out of this truck.
Hi Kevin nice compact set up looks like a sturdy RC if you don't mind me asking what are the purple handled tools you use you look very handy and strong get into the tightest of gaps need to get me some. You have to do a RC Sundance to get rid of this weather ⛈ brilliant channel
So I can't find a single video on the subject but I feel it's right up your ally, I've been trying to figure out how the 4s outcast dose with the 6s 150 amp firma esc and 1700kv surpass motor 😅 it came heavily upgraded but before I bash it full power on 6s I'm looking for some reviews and tops speed runs, on stock 4s it's already crazy 🤪
You gotta try out the arrma vorteks it's supposed to be fast. My neighbors bought two of em and I ordered two of em they came in today but I had to work today and tomorrow double shifts so I can't run em till wens n thurs when I'm off lol. My neighbors motor bearings blew out on both of them though when he tried outrunning my big block Arrma Granite mega v3. I'm building the world's fastest and most powerful Arrma Granite mega v3. Atm it's got a 4076 2200kv with a hobbywing Quicrun BL 120 3s esc and it's got integy aluminum motor module on it alot of aluminum parts on it and titanium skid plates and it's now got a vattera RC C10 truck body on it which looks scale actually looks realistic. I got head lights n tail lights in it. My head lights are neon green my tail lights are purple. I got the custom car battery lipo alarm in it lol I got turbo fans running on the motor I do got a water cooling system for it radiator neon green n purple clear tubing bad ass integy fans. I ordered the arrma Skinz from the UK I got the lollipop girl one and the Joker one . The joker is on it now atm. I just ordered a few more of em the zombie and nuclear ones. And the gorilla one. I got all kinds of stuff on it. And already have it's next upgrades coming in. It's getting a hobbywing Max 6 esc next and then the max 5 which I got custom aluminum mounts for it so it's gonna be amazing when it's done. Right now it's doing 78mph as it sits I'm headed to 100mph and beyond and gonna see if anyone can beat it... Thing is it's gotta be a Granite mega v3 because I took the mega version and built it into a absolute monster. And I got the notorious today as well and it's beautiful lol I can't wait to pull it out. I got its 8s upgrades already for it so it's gonna be 8s wensday I'm also going to try to build the fastest notorious as well after my Granite is finished. I'm gonna send Arrma it's full spec sheet n video ect and see if they wanna built a limited edition granite using it's style ;)
I bought a Thunder Tiger EK4 years ago because of good reviews. It sucked so bad it was the worst RC I ever had and I felt so cheated. I made a promise to myself to never make anything out to be better than what it is
Looks good but, I prefer the looks of the 1/8th scale one as the wheels on the 1/10th one look to close together but I do like that the 1/10th one has is 4s as I feel 6s is a little bit to powerful for me but I am a beginner in rc. Hopefully I'll see you at Paddlesworth on Sunday!!!
personally I love the spektrum controllers. they come with about all horizon hobby cars and the only problem ive had with mine is the steering thing has lost its temtion on one side after a year of abuse
First things that break on those is arms front and back would recommend you oil the pins and also get a tbr bumper and 6s typhon aluminum shocks fit on front and back 3s is amazing and 4s is too much power!
Loving mine... I was curious to see if she really is Kev fast because it sure seems like a rocket to this old timer. It does handle really nice once you get the throttle under control, but wheelies on a whim... My slide saver screws are in rough shape, and by shape I mean ground down flat. Sparky sparky...
I want one of these types of trucks to bash with but I can't see spending $300+ on one right now. I didn't even spend that on my guitar or amp lol. So I spent $95 USD on a buggy that'll do 30+ mph for starters.
Great unboxing vid Kev looks like a really fun truck looks to be really well made I may have to look into getting one. You should try a Redcat Landslide man I beat mine mercilessly and I haven't broke anything. I'll let me take that back the rear bumper got sheared off when I was bashing somewhere and disappeared. Not that I cared because I was planning on putting a wing mount on it anyways. All I did to it from the box was change the spur gear to steal and put 500k diff fluid in the center just like I would any center diff vehicle I'm not a fan of plastic Spurs.
Do a review on the 3s typhon!! I frigging love mine and I know you like it also. It may not be a big backflipper like you like though Haha awesome video as always bud
Not everyone gets stuff free sent to them...i paid for mine...
Daang it's like nobody knows you commented on Kevs video. You should be known...
Good for you
@@bdp3502 just stating facts...
I did say many other youtubes not ALL youtubers, sorry for the confusion. It seams to me in order to get free samples you have to hide the bad points. I value credibility over handouts and by the sounds of it you do too so all good :) Love your vids by the way dude. At a side note, I wouldn't turn down freebees so long as I can be 100% honest, that's the deal I have with banggood :) I have many brands contact me most days offering me free stuff and when I tell them I'll only review if I can be 100% honest and show bad point too they go all quiet!
The traxxas 1/6E REVI VXL cost around 230 $ in traxxas store and they cant ship to my land. So in my land the rc car cost 400$
cannot speak for everyone but I personally respect your honesty
and the "delay" is the radio ... had the same with my v4 kraton
Weird. My outcast came built way different than this one. Metal everywhere and a lot different battery box. I love my outcast and thank you for reviewing the outcast. Love your channel brotha.
4s and 6s are completely different
You probably got the 6s
Hi kevin
Happy late fathers day to all the dads out there driving radio controlled cars with there kids
Jordan 420 thanks
@@donnamoller1875 for sure man it was mu boys first birthday 2 days after what a great time
I like the fact that you're brutally honest, IDK about anyone else but that's what I want to hear
"Kev's honest rc reviews"
9:24 only kev would solder directly over a lipo lol
lol
Lol
He is a professional
😂😂
Least you won't be bending chassis now! I honestly think the plastic chassis are more durable than the aluminum.
I think so too, man.
@@BananaDucshortz I mean it makes sense with suspension arms, Everybody knows not to run aluminum arms cause they'll bend. I look at the chassis the same way. Still love my v3 kraton though. Every time my cousin and I go out the 2 trucks that ALWAYS come are the kraton and xmaxx..... But I can't wait to get a 4s outcast.. Sometimes I don't feel like lugging around my xmaxx for a bash session and a smaller truck would be nice, Seems to fit the bill.
metal chassis can be ok if designed right and they use the correct material but I agree, 99% of the time plastic is better for bashing
i had my gens ace batteries since october 2014 and they still work perferctly
I bought one 4 weeks ago. driven it 4 times. First time broke the right rear a arm. second run with replaced a arm, all good. the third run broke rear left a arm. replaced it. 4th run broke the chassis after landing on a corner of jump right in the middle of the chassis. It was my first arrma, and i'm honestly a bit disappointed. It is a fun truck, no daubt. But not as tough as i would like. I'm a pretty careful driver with my rc cars...
If you are experiencing Delay issues turn on the radio hold down the set button on the ESC as soon as you see the ESC flash red press the set button and leave your controller at the neutral position and then do the same for full throttle and full break I have put a different receiver in there and you get better range love your videos keep it up m8
Threre is converters to convert the connecter you do not need to cut the cables. By the way your my favourite youtuber you taught me a lot about RC cars and I really appreciate what you do for your fans.
Hi Kevin. My name is Scott. 8m in Washington State. I am very impressed with your approach to helping everyone interested in RC goodies. It's great how you show the kits and show people how to work on your cars or whatever. I was looking at some different monster trucks and found a model that you might have a really good time checking out and to see if Stimpy can bust it!!!;) It's called the Carbon Asault. AMain Hobbies has the kit. Thank you for creating the videos you do. They are extremely good information and help people that are not very familiar or just need info on a model they are interested in. plus your videos are helping bring more and more people into the world of RC. I have been running aircraft boats and trucks,cars and so on for 40 years and it only gets better and better.
I am curious about this m9nster truck. It looks to be a good quality but you never know. Thanks again Kevin for all 5he great videos!!!:)
in my opinion, the EC% connectors are the best at staying together during hard landings. i dont go hard as bad as you, but i do push my cars. never had one come unplugged. i now change all my ESCs to the EC5s
The outcast is beautiful truck as well keep up the good work Kev
Honestly Kev... cant take you anywhere. love the content.
I used to boil plastic parts in water, made them more flexible
The Arrma slider plastic driveshafts are a LOT better then the Traxxas ones. The only issue that happens sometimes is the axles come apart because they aren't tightened from the factory
Another good review. About batteries with those type of plug you just need use a good adhesive velcro joint the batteries in position when the cables don't touch together and go for bashing.
Any battery will puff up. I had it happen to me and I found out I wasn't running the proper C rating. Love the video. Have a good one Kev.
This is gonna be fun to play with Christmas 2021
You, Rich Duperbash, and Aussie Rc Playground are the best and most honest reviewers. Great video!
I have this and it is awesome
Kev like I said in your other video. New servo and hot racing servo saver kit. Turn off punch control and tighten the slipper a turn or two and it'll help the laziness.
I love my 4s trucks though.
And pick up a full set of spare arms, the arm quality seems a bit inconsistent as my outcast has been to skate parks and BMX tracks no issue but my 4s kraton broke an arm on the second run, I was jumping it hard but still broke with "less" abuse
I can’t wait to see you beat the hell out of that thing. I had the 6s versions , your right about the plastic chassis , my senton 3s has a plastic chassis and that car takes the most beating out of any of my cars. Plastic for the win
I had to rock rollers to there’s a green one and the blue one and the green and the blue one goes fast fingers 40 miles an hour that’s what my dad said and I love your channel
What I like about your reviews is that you don't hold back. You bash them to their limits. That way we know what were getting.
Nice u got the Outcast, I just got one last week too but the 6s version n so far im liking it, U have the Notorious so u already know how the 6s versions run
Theres a cable holder clip for ur balance lead wires, its right on the spur gear cover
Also change that crappy radio out, they say it has a delay when u put the power down
I like plastic driveshafts. Mip heavy duties are the best but then your transmission and diffs suffer when you crash
Kev Talbot, the only man in history to go from driving a Rover 25 to a Lamborghini Huracan 🤣
From the videos I've seen it appears that the 4S Outcast whellies much to easily for my driving skills. I'd prefer the 4S Kraton but would want a more substantial front bumper and the Outcast 4S tires on the Kraton
yeh, i think this one is more for stunts
Very good review like always! I like the smooth sound it makes and for sure the look is unique in a way! Can't wait to see it in action.
nearly 1000 subs for you!
@@KevinTalbotTVYEEESSS ! Very close!
This is why i love your channel honest on everything!! Keep it up
If the 3s blx system is anything to go by, this will be an awsome basher. We have a senton and a big rock. Both break on a regular basis as does my kraton, but overall they are fairly strong. Give it some welly kev, if anyone can show the weak points you can!!
Got agree, the tactic radio is much faster and better quality than the new spectrum it comes with now. Servo's are pants and parts availability is ok if you shop in America.... T-bone bumpers are a good investment, but again only from the U.S.A. and expensive for what you get. As you can see, I'm not an arrma fanboy just like the look of em in general. On the same score, my trx4 is good too but has its faults....
Looking forward to see you bash it to bits!!
ATB
Andy.
HONESTY is the best policy Kevin..........SEND IT TO THE MOON, PLUTO, SUN AND THE STARS......CRASH IT, SMASH IT, FLATTEN IT, REBUILD IT..............BACK TO THE MOON, HAPPY FLIPPIN N FLYIN
Can u get and do a video with the Arrma Limitless Roller i want to see what crazy stuff u will put in it :D
Omg!!!! This RCC is awesome 😎
Professionaly unboxed great Kev 👍🏼 rare body as well
Next truck to try against the TRX4: RedCat Gen8
Also use a fan model 25kg servo! Sold on Amazon prime! With hot racing aluminum servo saver!
Andrew Banuelos I got one for my notorious and it’s better than the stock for only $24 and one day shipping
Do you have a link to them?
Buy extra wheel nuts because when the wheel comes loose the hex falls apart 👍
I think as a guess kev that out cast will do 52.7mph
Really does kev looks tough thinking that too compared to Granite
Great rundown and BADASS truck Kevin 👊!!!! My Kraton 4s has been a Blast 😍. Fast, easy to wrench on, and takes a flogging 👀😎💪👊👊
sounds like it ticks all the boxes dude. i had it out the other day again, the delay in the controls is bad and makes it so unpredictable, everyone says its the radio so ill change it out.
@@KevinTalbotTV the STX2 controller sucks 😝. I just swapped in the old Tactic TTX300 👍 and recalibrated. These 4s rigs make a whizzing sound. Sometimes the slipper will slowly loosen up too. Running mine 1/2 turn out from tight 👍. Be careful if you get yours wet. The slipper and rear input bearings seize up easily 👀. Rubber sealed is the way. 🍻
@@KevinTalbotTV what do you think of the plastic discs in that outcast kind of makes me iffy on buying one
The reason I don’t watch crap sparks is because he always makes it sound better that it is but Kevin is brutally honest
They should of stuck with the tactic TX300 radio, the TX300 come with my typhon 3s, its a really good radio.
yes 100%
Cant wait for the bash
What is better Arrma outcast 4s or the Arrma outcast 6s because I have been to rc for 3 years now and I just want to know which one is better for me. Thanks 😊 🤘🤘
Great honest review Kev! 4s power is awesome! Body looks great! 👍🍻
Dear arrma fan boyz! Please Don’t get mad at an honest review?
I Have an rc Halstorm tht got run over one time after getting brand new shocks, and to my surprise it's still kicking.
I was inspired to get it aftor seeing one of your videos. You alwase know how to fix cars even if they're trashed.
(If I reach 100 likes I will link the product.)
Turn up the punch!!! My friend just got one and couldn't figure out why there was a "delay" when you pull the throttle! I think stock it was set to 1 out of 5. And the brakes! There are a lot of settings for the brakes! It's all in the manual, but I'm sure you've already learned that and changed them by now :P
Granite with a chassis brace and wing
And body clips
That is my dream rc car!!!! i really really really really want one! but the price in here in Malaysia is crazy expensive and the spare parts are super duper hard to find here too
i understand :')
Almost don't wanna buy an rc unless you have reviewed it.
Kev, please do a review on a redcat everest 10 and compare it to the 200 dollar crawler, and do a review on the redcat landslide and compare it to the outcast
Been waiting for a while for this review. I bought the Kraton 4s, replaced servo and radio just after box was opened. Great review. I look forward to seeing what you get out of this truck.
Turn your punch up and it's the servo saver Kev .
Hi Kevin nice compact set up looks like a sturdy RC if you don't mind me asking what are the purple handled tools you use you look very handy and strong get into the tightest of gaps need to get me some. You have to do a RC Sundance to get rid of this weather ⛈ brilliant channel
So I can't find a single video on the subject but I feel it's right up your ally,
I've been trying to figure out how the 4s outcast dose with the 6s 150 amp firma esc and 1700kv surpass motor 😅 it came heavily upgraded but before I bash it full power on 6s I'm looking for some reviews and tops speed runs, on stock 4s it's already crazy 🤪
You gotta try out the arrma vorteks it's supposed to be fast. My neighbors bought two of em and I ordered two of em they came in today but I had to work today and tomorrow double shifts so I can't run em till wens n thurs when I'm off lol. My neighbors motor bearings blew out on both of them though when he tried outrunning my big block Arrma Granite mega v3. I'm building the world's fastest and most powerful Arrma Granite mega v3. Atm it's got a 4076 2200kv with a hobbywing Quicrun BL 120 3s esc and it's got integy aluminum motor module on it alot of aluminum parts on it and titanium skid plates and it's now got a vattera RC C10 truck body on it which looks scale actually looks realistic. I got head lights n tail lights in it. My head lights are neon green my tail lights are purple. I got the custom car battery lipo alarm in it lol I got turbo fans running on the motor I do got a water cooling system for it radiator neon green n purple clear tubing bad ass integy fans. I ordered the arrma Skinz from the UK I got the lollipop girl one and the Joker one . The joker is on it now atm. I just ordered a few more of em the zombie and nuclear ones. And the gorilla one. I got all kinds of stuff on it. And already have it's next upgrades coming in. It's getting a hobbywing Max 6 esc next and then the max 5 which I got custom aluminum mounts for it so it's gonna be amazing when it's done. Right now it's doing 78mph as it sits I'm headed to 100mph and beyond and gonna see if anyone can beat it... Thing is it's gotta be a Granite mega v3 because I took the mega version and built it into a absolute monster. And I got the notorious today as well and it's beautiful lol I can't wait to pull it out. I got its 8s upgrades already for it so it's gonna be 8s wensday I'm also going to try to build the fastest notorious as well after my Granite is finished. I'm gonna send Arrma it's full spec sheet n video ect and see if they wanna built a limited edition granite using it's style ;)
Well we appreciate you and your honesty, Kevin..👍🏿
Wow!! Pat should get the Arrma Kraton 4s
Awesome, the infraction does look killer I think it'll get boring quick but looks so awesome I want one anyway lol
The video really gives that justice it looks sick
I CANT BELIEVE YOU ORDERED THE INFRACTION DUDE I CANT WAIT
yeh man should be a bit of fun :)
Kevin Talbot make the infraction double motor
Thats why i like your channel you are honest👌 about it its not cool to hide any weak things about the rc cars
I bought a Thunder Tiger EK4 years ago because of good reviews. It sucked so bad it was the worst RC I ever had and I felt so cheated. I made a promise to myself to never make anything out to be better than what it is
My rear differential yoke has melted 2 times causing failure in my stock Outcast 4S within a month. I'm in the process of returning the truck.
I just unboxed and drove my Arrma OutCast 4s and I drove it down the road and back one time and the shocks already almost leaked all the oil out
The plastic chassis are really tough I mean in our last bash landed on the edge of a skate ramp and bent it and then it went straight back into shape
Also helps with the center driveshaft being spring loaded
Looks good but, I prefer the looks of the 1/8th scale one as the wheels on the 1/10th one look to close together but I do like that the 1/10th one has is 4s as I feel 6s is a little bit to powerful for me but I am a beginner in rc. Hopefully I'll see you at Paddlesworth on Sunday!!!
Kevin hows the monster truck coming along. Looking forward to see you driving a real monster truck.
Today’s my birthday and I’m planning on getting the Armma outcast
happy birthday dude, enjoy your new toy :)
personally I love the spektrum controllers. they come with about all horizon hobby cars and the only problem ive had with mine is the steering thing has lost its temtion on one side after a year of abuse
First things that break on those is arms front and back would recommend you oil the pins and also get a tbr bumper and 6s typhon aluminum shocks fit on front and back 3s is amazing and 4s is too much power!
Great videos... Definitely liking in that Arrma Outcast 4s.
Hello! I'm Laci from Hungary! Yours is the best RC channel! Can you answer me a few questions about this car?
can you do a video where you test the mini max and the Arrma Outcast 4s and pick wich ones better?pls
The arrma outcast 4s at my local hobby store here in WA is between 800 to a grand
Loving mine... I was curious to see if she really is Kev fast because it sure seems like a rocket to this old timer. It does handle really nice once you get the throttle under control, but wheelies on a whim... My slide saver screws are in rough shape, and by shape I mean ground down flat. Sparky sparky...
On my buddies kraton, we had to tighten the slipper out of the box, but other than the thing has been awesome
Soldering on top of the battery... savage!
Hey Kev, your problem with the slow acceleration could be a bit of throttle dual rate misadjustment.
Congrats kev for 300k subs let's get you to 1 million subs
A wheelie bar is in the future and especially if you want to speed run her!
Make sure to have a in near for all the parts
I like the danger of soldering on top of a lipo
Make a rustler 4x4 8s
I haven’t ever seen a stampede 4x4 on your Chanel- you should totally get one and make some x maxx vs stampede videos
OMG, can't wait for you to get the Arrma Infraction.. That's my next RC when they're available😁
Love your videos. Got the felony 6s and love it!!!! It’s wild! Started with the hoss vxl 4x4 and have upgraded everything.
Thanks to your videos.
I want one of these types of trucks to bash with but I can't see spending $300+ on one right now. I didn't even spend that on my guitar or amp lol. So I spent $95 USD on a buggy that'll do 30+ mph for starters.
Great unboxing vid Kev looks like a really fun truck looks to be really well made I may have to look into getting one. You should try a Redcat Landslide man I beat mine mercilessly and I haven't broke anything. I'll let me take that back the rear bumper got sheared off when I was bashing somewhere and disappeared. Not that I cared because I was planning on putting a wing mount on it anyways. All I did to it from the box was change the spur gear to steal and put 500k diff fluid in the center just like I would any center diff vehicle I'm not a fan of plastic Spurs.
Hey kev would you recommend the outcast 4s or the erevo 2.0 for hard bashing
Outcast 4S. Both need upgrades but cost less for the upgrades on the 4S Arrmas
Those plastic driveshafts are 10x better than the traxxas ones
6 months to a year from now: Arrma OutCast 4s gets a 6s Castle upgrade! Would be a good idea if it holds up.
Silly
Just joking
can you make another video about the 12428 wltoys. that would be nice to see
It's probably that remote being cheap making the response slow put the tactic in and see if is any different
You should get a traxxas x01 and get a lambo bodyshell to match your car
Do a review on the 3s typhon!! I frigging love mine and I know you like it also. It may not be a big backflipper like you like though Haha awesome video as always bud
Where do you get a vw beetle show from is it from eBay because I have no idea
Great honest review Kev! Keep up the great work. Look forward to the Arrma Infraction!👍