Making of base plate (cnc milling) Part1

Making of base plate (cnc milling) Part1
CNC Production: ruckbs.sk/
Machine: Three-axis machining center brand UDM-2216
CAD/CAM software: Cimatron 15
My video editor:Movavi Video Editor Plus
www.mvvitrk.co...
Изготовление опорной плиты (фрезерование чпу)
#cncmilling #cnc #CncFrezar

[@DolezalPetr]

záběr kalendáře je nejlepší :D

[@CncFrezar]

Súhlasím 😁

[@ВладиславПротасевич-р9б]

nice 👍

[@machineworld1873]

great

[@mirohornik98]

Nice video!!!

[@CNCAkademy]

Nice :)

[@CncFrezar]

THX.

[@leonelromero8349]

Excellent work. when they know that the material is bent, what work they do to straighten it and then finish it.
Greetings from Argentina.

[@joriojunior202]

Muito bom...

[@gryzlygames3566]

Pěkné

[@CncFrezar]

Ďakujem

[@greggjohnson7667]

What was the actual machine run time for that part and how bad was the stress relief after removing all that material? Cool part, program and video

[@CncFrezar]

Thanks! The milling time was about 6 hours. The plate folded about 0.2 mm after the work was completed.

[@henriksrensen2463]

how do you deal with the breakthrough of the high feed cutter. Did you Hammer it out? and if so at what thickness / depth did you hammer it out??
keep up the good work👍👍👍

[@CncFrezar]

Air is enough for that. To a depth of about 100mm, it's ok

[@emilecooper3874]

You should turn off exact stop option on your machine to improve speed of roughing, and cutter life.

[@davidjurenik5611]

hey Bro, this was an excelent workpiece for testing an indexable mill i gave you. Cmon, i need results :D

[@CncFrezar]

Bude aj lepší tam za zapotí! Toto je malý kus.

[@andrealmeida3915]

Por m ais videos assim

[@powercosmic4058]

your cnc is a AWEA vp 2012?
I was working on the same machine in my old shop and AWEA BM 2100

[@randomdrive8226]

Great video! Has this machine seen any major crashes?

[@CncFrezar]

THX.Not yet. I hope not in the future :-)

[@SapphireEngineering]

We machine similar base plates on our planomiller in India.

[@pozalujstapodpishus3062]

клевый календарик
как сильно повело, не мерили?

[@CncFrezar]

Спасибо. После обработки пластина была загнута примерно на 0,2 мм.

[@度空-u5r]

你装三个虎钳他不香吗

[@dolfstromer3498]

why don't you use cooling?)

[@CncFrezar]

we cool with air

[@henriksrensen2463]

the intermittent cutting in milling action. can lead to theamal shock in the tool, causing micro cracks = premature tool failure. because it goes from Hot --> Cold --> Hot --> cold......

[@muhammetyldz1899]

Any twists after removing the part?

[@CncFrezar]

bent part about 0.2mm

[@muhammetyldz1899]

@@CncFrezar really very interesting

[@muhammetyldz1899]

@@CncFrezar What is the reason for so little twist?

[@CncFrezar]

@@muhammetyldz1899 Quality material + annealing

[@muhammetyldz1899]

@@CncFrezar annealed in the oven okey👏👏

[@度空-u5r]

把用什么刀具参数说一下！大家参考一下

[@loleknabolka]

ruclips.net/video/C-FTIAGRIcQ/видео.html

[@CncFrezar]

It's there 4:12

[@serkanciftci4949]

Çok yavaş çalıştırıyorsun makineyi

[@CncFrezar]

It's a big machine. The feed on this machine is at maximum.

[@serkanciftci4949]

@@CncFrezar Okey brother You are master.👍