KRATON Servo Upgrade - Savox 1210 Kraton, Outcast & Talion - Hot Racing Mount & Arm
HTML-код
- Опубликовано: 21 июн 2019
- IMPORTANT - This is just what I did.. there are MANY OPTIONS this is just one of them for my KRATON Servo Upgrade.
Savox 1210 servo replacement for Kraton, Outcast and Talion - Hot Racing Mount and Arm.
SAVOX 1210sg WATERPROOF Servo:
www.amazon.com/Savox-Aluminum...
HOT RACING Steering Arm:
www.amazon.com/Hot-Racing-Alu...
Hot Racing Servo Bracket / Mount / Saver:
www.amazon.com/Hot-Racing-Alu...
It sure does much better now
My Kraton 6S barely 5 months old. On my 3rd Servo already. Replaced stock servo with Savox Servo 1268-SG black edition. It blew quickly as well
Just went through the stock one & the Eco Boost. Thanks for the upload will try this one out next. 💙👍
Great vid and very informative
I just put a savox in my eXB and the servo lead come right out into the driveshaft and I was worried about it rubbing or getting caught in the driveline. Have you noticed any wear on the cable?
Great video. So you have to get the HR servo horn with the Mount correct? I just got the HR servo Mount for my notorious 6s and it's too tall the horn won't connect to servo. Because if the bottom nut. I noticed on yours it's longer so you have more clearance that's probably when I need is the HR servo horn.
Could you link what I should buy off amazon for the arm as of oct 19 only the mount and servo are available I think I can buy the other things but I just don’t want to buy the wrong things I am very new to rc cars and don’t want to but the wrong things
great video on that. im actually ordered just now same size servo savox 2210SG but i have the outcast 6s v4. using the EXB servo mount which is same size as stock so hopefully she should fit ok. you said you changed the screw on the horn arm to the servo saver correct? just alittle longer to add the washers to line her up.
Did it say HV 7.4v on your savox box. I ordered one. But mine says HV 7.4V max on the box but 6.0V max on the website. So which is true
great video, helped a ton but the arm does not look level, could be the angle of the camera
Did you reuse those rubber things that came with the stock servo?
I know it’s been 9 months but no. You don’t.
I have the stock servo mount with that servo it only flexses a little.
What u mean flexes? I’m new to RCs and I just dropped my truck off to get this same servo put in. Do I need a mount? What’s the difference in mounts?
Great Informative video, could you please link the spacers that you used to fit the servo. Thanks
sorry for the delay...they were just washers from Home Depot.
Shit move on ARRMA/Spektrum for using 23T WEAK servos, and also using a virtually unfittable horn/crank. You basically need to buy the above to fit any savox servo. The horn that the Kraton uses has a lot of clearance because the attached crank's screw protrudes too much downward and into the servo. So you need a horn/crank with enough clearance to actually put the horn on the servo. Shady but whatever.
Or something else that will fit on that servo
Hey guys tons of options here... but this is just what I've done. One run so far and its good. But let's see. Savox seems to have a good reputation and reviews.
Great video man. I have run into this issue with another savox servo with the HR mount and was wondering how long that screw needs to be now? The one connecting the servo horn to the steering rack that now has the spacer to level that piece connecting those two things. Now I cannot put the horn back on because there is no clearance. Any help would be appreciated.
I think if u turn the horn upside down it would be lower... 🤔
Nope
I can't stand savox servos there so noisy and annoying