I have been using the MVS44 knock off wastegate for over a year with no problems on a 76 mm turbo works great can hold as little as 5 PSI if I want it to. That's on a 2jzgte in a SC300.
Does your car run the long rectangle maf or square maf? It’s weird cuz the kit says it can fit my car which is a 01 but my square maf will not fit to the piping because the piping is a rectangle maf. Only thing holding me back from buying the kit right now. Also is there any trimming needed to fit the intercooler piping?
@@apexvisiontv what style maf does your car have? Do you have the newer or older maf on your car? I’m really looking into buying this kit, but my maf won’t seem to fit which will cause a whole problem when fitting up the intercooler piping. Any suggestions?
@@apexvisiontv if say your car does sun the newer maf, what did you do to solve the problem? Or is your car older than 2001 and run the older maf style?
@@angelfilms0 it’s really dependent on tune. Plus the conditions of the engine is always an unknown so I wouldn’t approach it that way. But if you do tune and build it the right way the sky is the limit. You will probably need to switch some stuff along the way
Thanks for watching. My advice is buy everything from the start like you are trying to make big power. Perfect example my exhaust isn’t big enough. If I spent the money the first time I’d just go custom exhaust
i found one that has an identical manifold and it says it ffor the is300 chassis, is that actually different from the same year gs3s, or is that what this is? its the "cxr turbo manifold intercooler kit for is3002jz gte "
I dont see many 3GS cars with 2JZ. Sounds like alot of custom work. If I could do it again Id go GTE and a log manifold single turbo set up. It can get complicated quick. Good Luck!
Nah I don’t but it’s just a cx turbo kit with tanabe exhaust k sport coils magnaflow midpipe. Stoptech slotted disk with sport pads and stainless steel lines. Some headlights I wouldn’t recommend 😂 thanks for watching
I love the angles!! Whoever filmed this you need to hire!!
Homie special with the camera huh 😂
where da update i remember seeing your old videos on the gs happy to see you finally working on it
I have this kit and run it, in the process of tuning on the emu black parallel harness as we speak. so far so good
That’s good to hear I’m really close!
Did you drill the hole for the oil line yet?
Can’t wait to see a update was thinking of doing this soon after I get all my seals redone
I’m excited! Thanks for watching
I have been using the MVS44 knock off wastegate for over a year with no problems on a 76 mm turbo works great can hold as little as 5 PSI if I want it to. That's on a 2jzgte in a SC300.
Thanks I been leaning more towards running the 44 that came with the kit!
🔥🔥🔥
Appreciate you bro
Does your car run the long rectangle maf or square maf? It’s weird cuz the kit says it can fit my car which is a 01 but my square maf will not fit to the piping because the piping is a rectangle maf. Only thing holding me back from buying the kit right now. Also is there any trimming needed to fit the intercooler piping?
@@Nada.yourbusiness I think the older MAF holds boost better than the newer one that’s why the kit is designed with that
@@Nada.yourbusiness I didn’t have to trim anything
@@apexvisiontv what style maf does your car have? Do you have the newer or older maf on your car? I’m really looking into buying this kit, but my maf won’t seem to fit which will cause a whole problem when fitting up the intercooler piping. Any suggestions?
@@apexvisiontv if say your car does sun the newer maf, what did you do to solve the problem? Or is your car older than 2001 and run the older maf style?
@Nada.yourbusiness i know someone that runs the newer style maf. I was planning on doing the older one but my car is down
Finally!!! Is this the final fit and install?
Fit yes but I’m real close man
Appreciate you checking in
How’s it holding up?
hey just wonder my stock 2jz 225hp how much hp does this add to a 2jz after installing the kit ?
@@angelfilms0 it’s really dependent on tune. Plus the conditions of the engine is always an unknown so I wouldn’t approach it that way. But if you do tune and build it the right way the sky is the limit. You will probably need to switch some stuff along the way
@@apexvisiontv how much hp did it add to yours after the kit bc i’m really curious and very scared on tune just because it can blow up the engine
I’d advise taking the extra time to save then. Do it once do it right
@@apexvisiontv do u reach around 300-400 hp with the kit?
@@angelfilms0 not without a tune.
I have a 93’ gs, im 18 and im tryna do this. Any tips and how’s it holding up?
Thanks for watching. My advice is buy everything from the start like you are trying to make big power. Perfect example my exhaust isn’t big enough. If I spent the money the first time I’d just go custom exhaust
I'm from the midwest. I've only seen one first gen GS.
Looking clean🫡🔥🔥🔥
Thanks for watching!
Could you still squeeze a front strut bar while the pipe is on the way?
I’m definitely going to find out! I would think so
Kuuup!
what turbo kit is this exactly? the link no longer works in description.
i found one that has an identical manifold and it says it ffor the is300 chassis, is that actually different from the same year gs3s, or is that what this is? its the "cxr turbo manifold intercooler kit for is3002jz gte "
@@wamchrXme so you really have to be careful about what you are buying. What exactly are you trying to boost?
It worked for me
@@apexvisiontvtrynna get some power in my 01 gs300 wit the 2jz-ge
@@apexvisiontv it works for me on my phone (not my pc?) so do you still rec this kit a year later?
Bro what lbs of boost should I run without tuning it?
Tune it asap. Otherwise I wouldn’t go above 5 psi until everything is buttoned up
Where i can find this same kit? And how much u spend
Check cx Racing gs300
Any chance of fitting this in an 06? I’m 16 and been saving up and im looking to start tuning my GS. Any tips are appreciated🙏🏼
I dont see many 3GS cars with 2JZ. Sounds like alot of custom work. If I could do it again Id go GTE and a log manifold single turbo set up. It can get complicated quick. Good Luck!
Any updates?!? I’m so curious!
Not yet a lot has come up but little by little. Its taken a lot longer than I would have expected but hopefully soon!
Thanks for watching.
Do you have a build list or part list
Nah I don’t but it’s just a cx turbo kit with tanabe exhaust k sport coils magnaflow midpipe. Stoptech slotted disk with sport pads and stainless steel lines. Some headlights I wouldn’t recommend 😂 thanks for watching
is this kit reliable?
Let’s hope so
Link to kit....
I’ll add it to the description now 💪🏾 thanks for checking in
Bro cuz ur gear cover is more square butttt u have an vvti iac sensor but I prob have a Rare engine with the bigger rods
I will check into this. Would be nice if I do have stronger rods
Do you got other social media?
IG is apex_vision.tv
Where are you from ??
AZ