The YFZ is 48.8 inches wide. My 2024 Raptor is 49.9 inches wide with its long travel Houser A-arms. Edit: Correction, my Raptor is exactly 50 inches wide. Stock it was 45.5" and the A-arms added 2.25" per side, 4.5" total.
Wow awesome setup. Gonna come back to this video a few times. Also the lights seems very bright and don't look half bad for the increased functionality.
Like a lot of what you did. The headlight thing for me is a huge noooo. The yfz and raptor have the coolest headlight design ever made.. it looks like evil eyes. The square rigid lights look way out of place. But other then that nice choices.
I agree with you, the square look does not go with the design. I just switched out my stock bulbs with HID bulbs and you get amazing light output for the rare night ride. The evil eyes must stay!
The YFZ is 48.8 inches wide. My 2024 Raptor is 50 inches wide with its long travel Houser A-arms. Btw, it looks like your front tires should trade places so that they're spinning in the right direction.
I got a 450r wife asf if i can get a 700r as wide as my 450r i would so get a 700r i heard they got more torque and has the reverse feature wich i need in a 450r sometimes
Lol, yeah that's about right. Well, to build one would put you at around 7k in parts and labor for what you see here. Doesn't have to be on a new 700 but any year as they haven't changed.
@@kennypetersen264 I do,once I get to work I will look it up and get you the list. Or you can call us at the dealership 360 825 4502. The stock number of the Raptor is Y2828. All the parts and part numbers are billed to it 😉
If possible, can you leave the link for the lights that you guys installed? And do they come with a harness or did you guys have to cut the end off the original?
Thank you, new they are just under 10k. This one here has about 7k in ugrades parts and labor. The big thing though is width, getting it a little wider really helps and you can do that for a $1,000 bucks 😀. Thanks for watching!
@@maxtanicfilms Thanks for the reply Sir. I'm planning to buy for me but the problem is no dealer available here in Philippines with this kind of bike.
Hey man did you have issues with your elka shocks? Who did you get them from? I think I bought the same alba racing kit as you, the LT eith elka legacy front and rear. How long did it take for you to get your shocks in? Just curious if you had valving issues with yours or if they were too soft. When i rode mine it felt like it was rocking back and forth like a rockin horse. Had to add way too much preload in the rear to get it up to 7.75 to 8 inches ride height same up front. Im a bigger guy 220lbs 6'2. And i recieved my shocks and arms the same day i bought them because i live next to alba. Love the arms but i felt like the shocks werent valved right.
I had mine valved for my wieght and ridding style, they work great. Ive run them going on 20 years. They sponsored us when I was racing WORCS on YFZ450's for the dealership. Never had an issue. The ones you purchased I would guess were not valved properly. We always order Elka direct so that's likely the issue with yours. If its a standard build they would be for a 180lb rider at a rec ridding level. Took about 6 weeks to get mine. Alba is good stuff always been happy with their products. Only thing I wish I would hv done different is a stiffer steering damper like a GPR.
Sure fred Alba long travel plus 2 a-arms ELKA legacy long travel shocks Tusk extended axle Alba nerfs Ais delete Fast flexx bars Hyper beadlocks Hmf fuel optimizer Hmf stage 3 slip on Hardline hour meter Rigid light pods Seven pos steering stabilizer Spyder grips Masis Razor twos Pt universal bar mount Case saver 97819 blk No toil airfilter
@@fredbeiner2620 Yes, the come with the standard travel links which are really cool. I must say these are first class all the way and ive run about every set of a-arms you can imagine Fred.
@@fredbeiner2620 Yes, it will do that Fred. The links are for the shock attachments only. They do not affect the width, it willbe the exact same as this quad but with your stock shocks
The Elkas are legacy long travel, A-Arms are Alba +2 and the Axle is a tusk +2-+4. I hv it set up 49 inch wide front 48.5 rear. The squat is 3 inches lower than stock
You could call the shop and order the parts then have your local dealer install? All bolt on parts so nothing tricky. 360 825 4502. Tell them you want the same parts that are on stock number Y2828 which is the Raptor in the vid 😀
@maxtanicfilmsdiy Resto-quad makes some upgraded led projector lights that are shaped like factory with running light and they are way brighter than stock but to each its own. Guess it's functionality over esthetics with the lights. Still a sick machine
Yamaha should make a Raptor MX model and give it the same width and ride height as a yfz from the factory
The YFZ is 48.8 inches wide. My 2024 Raptor is 49.9 inches wide with its long travel Houser A-arms.
Edit: Correction, my Raptor is exactly 50 inches wide. Stock it was 45.5" and the A-arms added 2.25" per side, 4.5" total.
Nice !@@MatthewC137
Wow awesome setup. Gonna come back to this video a few times. Also the lights seems very bright and don't look half bad for the increased functionality.
Those lights work awesome 😎👍
That’s a bad ass quad!!
Like a lot of what you did. The headlight thing for me is a huge noooo. The yfz and raptor have the coolest headlight design ever made.. it looks like evil eyes. The square rigid lights look way out of place. But other then that nice choices.
Yeah but, on night rides those pods are sick!! Thanks for watching. That's my hubs quad 😀
@@MadisonsCuteShirtTryouts yeah I’m sure they are bright, just love the menacing look of the stock angled headlights, . Nice build..
Copy that. Thanks much, it sure is fun
I agree with you, the square look does not go with the design. I just switched out my stock bulbs with HID bulbs and you get amazing light output for the rare night ride. The evil eyes must stay!
The YFZ is 48.8 inches wide. My 2024 Raptor is 50 inches wide with its long travel Houser A-arms.
Btw, it looks like your front tires should trade places so that they're spinning in the right direction.
I just ordered 2 Raptor 700R SE’s
I was with you up until the part where you Hacked-up the Lights. Resto Quad makes some Awesome replacement LED Lights that bolt right in.
Great Built 🎉🎉🎉 congratulation...
nice bro i want the same for my raptor
Doesn't sound bad if you're getting from trail to trail and the county cops are looking for ya!
Headlights on mine broke, the plastic mounts are so weak, never even brought it into the woods lol
Another 10 grand in that bike. MUTE THE SOUND
I got a 450r wife asf if i can get a 700r as wide as my 450r i would so get a 700r i heard they got more torque and has the reverse feature wich i need in a 450r sometimes
Could you provide a link to the wheels and bead locks you used?
Here ya go, feel free to call our shop if it helps 360 825 4502 hiper-technology.com
HiPer
I only have two questions…
How much would you sell it for?
How much does a kidney go for in todays market?
Lol, yeah that's about right. Well, to build one would put you at around 7k in parts and labor for what you see here. Doesn't have to be on a new 700 but any year as they haven't changed.
@@maxtanicfilmsdiy Do you have a full parts list by chance you can share?
@@kennypetersen264 I do,once I get to work I will look it up and get you the list. Or you can call us at the dealership 360 825 4502. The stock number of the Raptor is Y2828. All the parts and part numbers are billed to it 😉
👍
@@kennypetersen264 parts list
1341380010 axle
577-0034 rear tire
577-0031 front tire
575-65345 front wheel
575-55332 rear wheel
59-2742 Spyder grips
171-2054k steering stabilizer
197-T1-BLACK nerf bars
022821 PT universal bar mnt
2883126 Light pods
27-2010 hour meter
785-3570 HMF optimizer
23900216 ELKA long T kit
785-2569 HMF slip on
970819 case saver
203827678606 ais delete
FL-1003-14-31 Fast flex bars
199-MAA-LT-B6 Alba LT+2 A-Arms
nice
My OCD would not allow me to install those headlight with the rigid no facing the right way
Lol
Great build! Do you know if the Raptor is the same length as a YFZ?
YFZ is a few inches shorter
What was the total cost of all the extra goodies?? Just asking cause I just ordered 2 of those quads today
Hi Edward, Just over $6,300
Ouch so there's close to 20,000 in this quad 😬
Edit: lots of nice goodies tho!!
@@maxtanicfilmsdiy damn!!!
If possible, can you leave the link for the lights that you guys installed? And do they come with a harness or did you guys have to cut the end off the original?
They had to be cut. They are rigid pods universal
How much did this whole project cost?
Around 5k in parts roughly
What was the cost comparison with all the upgrades compared to the YFZ 450???
The difference would be $800 because the YFZ450R has wide a-arms and an axle.
Could you leave a link for the a arms I’m
hello sir. I fall in love with your bike.may I know much for the brand new?
Thank you, new they are just under 10k. This one here has about 7k in ugrades parts and labor. The big thing though is width, getting it a little wider really helps and you can do that for a $1,000 bucks 😀. Thanks for watching!
@@maxtanicfilms Thanks for the reply Sir. I'm planning to buy for me but the problem is no dealer available here in Philippines with this kind of bike.
@@loyzkietv3478 Oh that is a bummer, would have to import it?
Hey man did you have issues with your elka shocks? Who did you get them from? I think I bought the same alba racing kit as you, the LT eith elka legacy front and rear. How long did it take for you to get your shocks in? Just curious if you had valving issues with yours or if they were too soft. When i rode mine it felt like it was rocking back and forth like a rockin horse. Had to add way too much preload in the rear to get it up to 7.75 to 8 inches ride height same up front. Im a bigger guy 220lbs 6'2. And i recieved my shocks and arms the same day i bought them because i live next to alba. Love the arms but i felt like the shocks werent valved right.
I had mine valved for my wieght and ridding style, they work great. Ive run them going on 20 years. They sponsored us when I was racing WORCS on YFZ450's for the dealership. Never had an issue. The ones you purchased I would guess were not valved properly. We always order Elka direct so that's likely the issue with yours. If its a standard build they would be for a 180lb rider at a rec ridding level. Took about 6 weeks to get mine. Alba is good stuff always been happy with their products. Only thing I wish I would hv done different is a stiffer steering damper like a GPR.
Where did you get your rear shock reservoir bracket from?
It came with the Elka kit. You can get them from Elka if need be 👍😎
Sweet thank you so much!
To do all that can u give me a estimate of what it costed. Exactly what I wanna do when I get my 2023
It was about 6k in parts
Hi, please can you tell me what offset the hiper wheels are on this raptor please. Thank you !
Certainly
4+1 front(prt# 575-55332), 4+5 rear(prt# 575-65345)
Sorry last question, what size are these hiper wheels ? Thank you !
@@samdennison9985 10x5 fronts and 9x8 rear 😀
Hi Guys, how much did that upgrade cost including parts and labor. ? Just want to have an idea how much do I need to get my similar. Thanks
Its around 7k parts and labor
What kind of lights are these ? I know rigid but which ones ?
Hi Drew, they are the D-Series PRO Flood LED light for Polaris RZR. Prt# 2883126
@@maxtanicfilmsdiy how much more power do the lights pull do they kill your battery or stator thanks
@@carlosmedrano3549 Not sure but the stator puts out plenty so its no issue 😀
@@maxtanicfilmsdiy oh alright just curious do you know the specs on the stator,
@@carlosmedrano3549 50 to 60 volt output
How long can you stand a raptor up on its ass while its full with oil and gas? I got a bunch of skid plate work to do on my 07
tires sizes?
20x11-9 rears 22x7-10 frnts
Could you list all the parts for it?
Sure fred
Alba long travel plus 2 a-arms
ELKA legacy long travel shocks
Tusk extended axle
Alba nerfs
Ais delete
Fast flexx bars
Hyper beadlocks
Hmf fuel optimizer
Hmf stage 3 slip on
Hardline hour meter
Rigid light pods
Seven pos steering stabilizer
Spyder grips
Masis Razor twos
Pt universal bar mount
Case saver 97819 blk
No toil airfilter
@@maxtanicfilmsdiy could I buy just the long arms and keep the factory 700R se shocks?
@@fredbeiner2620 Yes, the come with the standard travel links which are really cool. I must say these are first class all the way and ive run about every set of a-arms you can imagine Fred.
@@maxtanicfilmsdiy but I want the atv wider but keep the factory shocks
@@fredbeiner2620 Yes, it will do that Fred. The links are for the shock attachments only. They do not affect the width, it willbe the exact same as this quad but with your stock shocks
So that's 18-20 thousand all in?
Full retail out the door is 19k
What kit is this I’m thinking of doing this modification
The Elkas are legacy long travel, A-Arms are Alba +2 and the Axle is a tusk +2-+4. I hv it set up 49 inch wide front 48.5 rear. The squat is 3 inches lower than stock
HOW DO I SEND MY RAPTOR 700R TO YALL!! THATS EXACTLY HOW I WANT MY 700r. a 700r WITH A 4540 SET UP!! SINCE WE CANT BUY 450 ANYMORE IN CALI!!
You could call the shop and order the parts then have your local dealer install? All bolt on parts so nothing tricky. 360 825 4502. Tell them you want the same parts that are on stock number Y2828 which is the Raptor in the vid 😀
You have a shop that'll do this for me?
If you are in the PNW sure, call Clem's Enumclaw Powersports 😀
@@maxtanicfilms 👍
What size tires?
20 inch rears and 22 fronts
Them headlights look out of place. With the curves of the machine it just doesn't match. Everything else is nice
Yeah but a night they are awesome!! The stock HL's are absolutely worthless at night unless your under 20mph
@maxtanicfilmsdiy Resto-quad makes some upgraded led projector lights that are shaped like factory with running light and they are way brighter than stock but to each its own. Guess it's functionality over esthetics with the lights. Still a sick machine
@@emack3492 Rgr that 😎👍