Install a fuel pump, Pulse pump the easy way predator 212 honda clone
HTML-код
- Опубликовано: 8 фев 2025
- Came up with a simple yet effective way to install your fuel pump, pulse pump vent fitting. On a Honda clone, predator, Briggs for your aftermarket performance kit, top plate kit. Jetted carburetor
🤣🤣 Anyone that starts a sentence with " So I'm pretty genius I think" must be slightly special.
🤣🤣🤣🤣🤣
Not bad. Better then drilling new hole in crank case. Nice vid
IT didn't work because you tryed to run the pulse pump to the hose in the valve cover. The hose in the valve cover, behind it is the baffle which has a one way valve. It only let's air flow one way and not the way you want. That's why you ne ed to drill the second hole in the valve cover. Fyi
I'm glad you said something because I can't see what the hell this guy is supposed to point the camera at and I'm building a hopefully fast minibike
Drugs are bad mkayyyy
Also its not the best idea to run the pulse pump through your governor hole. The piston connecting rod has an oil slinger, That slings oil all over the inside of the engine. So you could be getting oil sucked up into your pump. It dose work by vacuum. Buy a tap or a valve cover with a pulse fitting.