REARVIEW Camera and Stereo Install | Part 2: Toyota Tacoma 4Runner T100 Tundra REARVIEW Camera
HTML-код
- Опубликовано: 13 май 2022
- Tool List (center console panel removal):
- phillips head screwdriver
- flat head screwdriver
- 10mm deep socket and socket wrench
- plastic trim removal tool (optional, but HELPFUL)
- telescoping magnet (optional)
Tool List (stereo headunit removal and install):
- car stereo harness (allows install to factory plugs w/o intrusive splicing)
- wire stripper or scissors
- wire crimping tool
- phillips head screwdriver
- socket set and wrench
- assortment of wire crimps (if you can not find harness similar to mine); 18 gage size for most of the wires, with the stereo ground and power cables being slightly larger
- telescoping magnet (optional)
- zipties (optional)
- electrical tape (optional)
Tool List (rearview camera install):
- 18-22 gage wire connectors
- 18-22 gage T-Tap terminals aka tap-ins
- 10 foot or more length of wire loom
- electrical tape
- zipties
- wire stripper or scissors
- wire crimping tool
- 18-22 gage wire
*If the video was helpful, remember to give it a "thumbs up" and consider subscribing.*
Disclaimer:
Due to factors beyond the control of Engineered Mojo, I cannot guarantee against improper use or unauthorized modifications of this information. Engineered Mojo assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Engineered Mojo recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Engineered Mojo, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Engineered Mojo. 
Авто/Мото
Such a fantastic walk thru. Thank you for that. That background music got me in zen mode too.
Great video, your tutorials are awesome!
Thanks for the feedback on the video! Glad you enjoyed it 😊
Is it completely required to remove the drivers seat for the install?
Probably not, but makes it a lot easier to route the wires for sure
Is there a pretty similar process for installing a tailgate handle camera?
Should be very similar, just need to route the wiring to the handle. You can take off the tailgate access panel to get behind the handle easy enough I would think
Where you buy that usb lighter style connection?
I found that on Amazon
@@EngineeredMojo thanks