How to make a DIY Smartwatch! || ESP8266 IoT Project
HTML-код
- Опубликовано: 23 окт 2018
- Best & Fast prototype($2 for 10 PCB's): www.jlcpcb.com
In this video, I will show you how to make a DIY WiFi Smartwatch using ESP8266 ESP-12E module for under $20. The module has an inbuilt WiFi module which allows the watch to connect to the internet. The watch has an 128*64 OLED display which displays temperature and time and date. The main feature of this watch is that it can control other electrical appliances remotely through the internet from anywhere in the world. This is possible due an IoT cloud service, Blynk, which allows direct communication between two devices. In this project, there is a button on the watch which can directly control the relay modules.
Check out my latest video, PCB design tutorial:
• How to design a custom...
To learn more about blynk, you can watch my previous tutorials:
DIY Home Automation: • DIY Home Automation us...
DIY Weather Station: • DIY WiFi Weather Stati...
Complete Project details:
www.instructables.com/id/DIY-...
Github Repository:
github.com/theTechnowright/DI...
Amazon Links to buy the components:
ESP12-E : amzn.to/3AVSBHy
OLED Display: amzn.to/3jkXpQA
Resistor kit: amzn.to/3aXK3p1
SMD Switches : amzn.to/3E0Y01N
3.7V LiPo Battery : amzn.to/3pnDOTL
Battery charger circuit: amzn.to/2XvRQXV
** For Amazon.in links visit the instructables page.
DISCLAIMER:
This Project and the PCB design is solely done by me. You are free to use the PCB file to order PCB and make the project. But please do not recreate a video Tutorial of the same project or commercialize the project as a Product without prior permission from me.
Hot Air Soldering Station: amzn.to/2Zbchd5
Equipment used to make this video:
Camera Nikon D5600 : amzn.to/3G7i7NP
Microphone, Rode Videomicro: amzn.to/3jmlRRY
**Thanks to JLCPCB for Sponsoring this Video
www.jlcpcb.com
Like and Subcribe!
And also dont forget to share it !
_________________________________________________________________
Love watching my videos?? You can support my channel by donating through paypal:
paypal.me/theTechnowright
_________________________________________________________________ - Наука
Kid you are an evolution miracle :) ... watching you from 7000 km away and see what science had achieved in last century.... loved to watch and want more
Finally a good small youtuber. Most of other indian electronics youtubers make bs like free energy devices. Subscribed to your channel. Nice work keep it up!
Spacerame mr innovative is better
Here you can see my smartwatch software based on the arduino platform: ruclips.net/video/PfV0_dtcoIo/видео.html
Here you can see my smartwatch software based on the arduino platform: ruclips.net/video/PfV0_dtcoIo/видео.html
Haha sooo true....🤣😂. I'm Spanish so I'm tired of watching landscaping and construction projects haha.
My ex and bestie, she's black and she used to say she was so sick of rap videos and hair extension videos.
Finally someone who's not afraid to laugh at stereotypes like me. Well done man, I'm certain Shyam is mature as he is smart and will not take offense either, I mean stereotypes wouldn't be funny if there wasn't some truth behind them! Cheer mate! 🍻
😂😂😂😂👍
I like your work, let me just say some constructive criticism
1- keep eye on your audio level, i don't know what video editor you use, watch the two moving colorful bars that moves while playing video - these show audio level. You want them to barely touch the top all the time. In your video - the music is too loud and you are speaking quietly.
2- use flux on solder joints, do not be afraid of reheating the joint until it looks nice and professional. If you put too much solder, pull it away with copper strand wire or solder wick. Also remember to clean your solder tip (wire sponge for dishes is best bet). After soldering you can remove excess flux with IPA or something similar.
But you are doing great, keep up at it.
Agree, the most important thing is to learn how to solder properly. Basics first. Training, training, training.
Matej Rajčan Excellent Criticism
There $1 sponsored to the video, for good work. :)
Parabéns pelo projeto
hell yes, i turned the audio up all the way bc i couldnt hear him speaking and then the intro ear raped me. rip headphone users
this guy should get a sponsor.
Dexter Chew 1:23
@@JoaBro oh... hahah
@@memberwhen22 can you do anything better, diy, and for less than 20 dollars?
@@memberwhen22 before commenting his watch as "IMPRACTICAL SMART WATCH", tell me something, have you ever created some tech on your own, if yes please send us a link we'll see who's impractical 😉
Here you can see my smartwatch software based on the arduino platform: ruclips.net/video/PfV0_dtcoIo/видео.html
I like your video! What jumped out at me though is, "Holy cow that's expensive shipping! $49 for a $2 board!"
Choose your chosest PCB fabrication store
Great project man, congrats, you won a follower.
Really nicely done. Love the simple interface.
Nice work! And thanks for sharing the files.
Just a quick tip about the SMD soldering - you can do all the surface mount components with paste and hot air. A stencil will speed up the job but you can do it just fine without one. Just put a small drop of solder paste on each pad, then place each surface mount component, and then heat the board with hot air. Keep the nozzle moving in a small circle to avoid overheating any single spot. First go over the whole board to warm it up, then heat a few pads at a time until the solder flows nicely. Then move on to the next few pads. This way you'll only need to use the iron for leaded components and fixing any SMD joints you may not be happy with.
Thanks.
Yes, I can solder all the SMD components with paste and hot air, but I wanted to show that it can also be done with a simple soldering iron.
actual person that can show you good information, thanks man earned a sub you’ll grow remember me
Love this kid! didn't expect him to be that young! Well done mate. Amazing job.
Dude - this is outstanding!! Well done and thanks so much for sharing. Quite inspirational! I am amazed what people can create at home these days.
You may have strange audio, but dang, this is the best Indian RUclips channel I've seen so far
Wow This is pretty awesome, this guy should deserve a Sub!
Great project. I have a suggestion for the two buttons. Use the left button to toggle thru multiple relays that could be listed on the screen. After pausing on a selection, the screen could change to the screen that you showed. Then use the right button to switch the relay. The left button would go back to selecting a different relay. This way you could control many more relays.
That's great idea, I just need to work on the code.
@@shyam-ravi Hey there! I love this video and Shawn's idea here would be great. Did you ever implement this into the code? Thanks for reading this. Marton
hello shawn hill..while completing this project iam unable to upload the code hough iam press and hold sw5..please help me to complete this project..thank you
@@shyam-ravi bro plz upload new video
this is incredible. keep up the good work. keep making videos.
Subscribed!! Really talented youtuber, you deserve more subscribers. Love from Bengaluru,KA,IN
I mean That's how a project should be . Great job man !! keep going ! Wishing for great future !
really nice vid, thanks bud!
Awesome work, congratulations! Just subscribed to see more cool projects
Great project man. Keep up the good work.
This is so awesome! fastest subscription of my life :D
Cool! Keep it up, man!
You could add regular watch functions like chronograph, alarm, and such. Or redesign the PCB so it fits in a watchcase, with buttons on the side and it looks more like a regular watch!
Thank you!
You just got yourself another sub!
great project!! Loved it!!
Your accent is good, presentation is good. Your doing awesome man keep that up !!
Brilliant and thanks for the videos
This is AMAZING !
Great video! I like how you showed the entire process of assembling the watch without making the video too long.
i really learnt something thanks .
Great project. Thank you for sharing.
Brilliant Brother!
Thats amazing dude!
BRO U R REALLY AWESOME
I'M GOING TO DO THIS PROJECT :)
Great project!
I m from Brazil and i will try to do this project.
Wow! This is beatiful :)
Ahha! Loved it bro. Keep it up.
Thanks so much men... You're so smart... Congratulations! 👋🏻
Damn, nice work! You're talented.
Thanks!
nice Work!!
wauw! this really is inspiring! Great job dude!:)
Thanks!
Excellent job! :)
Bravo. It's super!
just amazing ....i have never seen such a video and such a project excellent ........just took away my mind .....i subscribed
Here you can see my smartwatch software based on the arduino platform: ruclips.net/video/PfV0_dtcoIo/видео.html
Bro I love your project
Thanks for the experience dude.
Man.. You Are AWESOME 💥
Congrats Bro!! soo cool
man you are the best make more like this videos i subscribed
Very nice project!
awesome video!!
Awesome work man...
Wow. You're talented. Very interesting.
Great work!
nice project have to try this
great video and link!
Bro, U r really @genius.
pretty neat project :)
This is really cool stuff
you are a genius buddy
Really good video!
Amazing project 👍
Cool and clear 👌
Great idea! dude
Great job.
ur pretty amazing dude
Awesome new sub keep it up 👍👍
Nice job
In the 90s we used to do hardware hacking like this. Much respect my young friend you brought back some memories (now I can't keep up with this stuff)
awesome bro ...you did a great job
super video man
Very nice project brother, best wishes from Brazil
I love how the music crescendos LOL
Wow shyam i was so glad to see that you have over 10k subscribers..Proud senior.Best of luckk
Hi! Thanks!
I like jlcpcb too.
Future Stark #Keepitupbro
Very nice project indeed. I would suggest replacing the hardware buttons with a LSM9DS1 and use gestures instead. That way you can use it with 1 hand. e.g. twist hand to wake up (show time), twist again to change function, move your hand up for OK and down for Back. It will also make your pcb smaller but will add about $7 for the extra part. If you have enough memory left you can also add cool functions like speedometer (for when riding your bike), compass etc.
U are indian but your videos are like foreign youtubers.keep it up ❤
Awesome bro....
Thanks join with me whatsapp...Bro...
@@TechThakar share your whatsapp number 👍😊
@@Dr.SanjeevSaxena you are...........???👍
LMAOO HAHA WHYD YOU USE A HOT GLUE GUN AS A LIGHT HOLDER. I THOUGHT THAT SHIT WAS A PROP BUT WHEN IT ACTUALLY WORKED I FUCKIN DIED, this the funniest shit i seen in 2018 god damn those 5 seconds made this fuckass year worth it
amazing!!
Kid, you are god, thanks!
Muy bacano y muy simple!. Muy buena recursividad para realizarlo. Si usas un ESP32 es posible usar Bluetooth y reducir el consumo ✌️
Here you can see my smartwatch software based on the arduino platform: ruclips.net/video/PfV0_dtcoIo/видео.html
nice job man
Great! All it needs is like a little bit of plastic to make it look a bit neater
Nice that looks like one of them deauther watches
This child is going far in life 😤😤
Really nice project friend, regards
A real-time clock for offline usage and an accelerometer to count steps and turn on when you tilt the watch toward you
The needs an accelerometer and rtc should be possible to integrate though
As easy as switching to the ESP32
Wonderful project! By the way: You are a Genius, you will make a brilliant career in electronics
Tchê ficou muito top esse seu projeto 👏👏👏👏👏😉
Good work brother
sweet bro i like ur pcb design
Great project
Wow...great little brother..keep it up ❤
Subscribed....well done dude....
Shyam...your a genius bro!!! 🤓🧠🤯
Excelent!
awsome bro... i really liked your video. Thanks.
Subscribed!