ESP32 WiFi remote with TFT display is able to play GIFs | soldering & assembly | makermoekoe
HTML-код
- Опубликовано: 17 апр 2021
- This video is sponsored by PCBWay. Get your own prototyping PCBs starting at 5$ here: www.pcbway.com/orderonline.aspx
A simple and tiny remote based on the ESP32 Pico D4 with integrated WiFi and bluetooth. To visualize things I've added this tiny 160x80 pixels TFT display. Temperature, humidity and acceleration sensor are as well on board. Initially build to control things in my camper van, this thing can be used to control anything around the internet of things. And the best: It can play GIFs - even my own ones!
You will find this project on my GitHub as well: github.com/makermoekoe/ESP32P...
I'm now on Patreon! Your little help is appreciated a lot! Check it out here:
/ makermoekoe
Links:
Website: www.makermoekoe.com
Instagram: /
Patreon: / makermoekoe
GitHub: github.com/makermoekoe
Instructables: www.instructables.com/member/...
My commonly used tools:
My camera equipment:
Camera: amzn.to/35sIGeg (*)
Microphone: amzn.to/3aZm2vq (*)
Camera clamps: amzn.to/2zUBYSF (*)
Mini tripods: amzn.to/35vCoe2 (*)
LED panel: amzn.to/35tbgfG (*)
*affiliate links. 
Наука
I am slightly annoyed at the fact you used two red wires to connet the battery but else a great video.
😂 made my day!
I was thinking the same thing!!! I'm sure we weren't the only ones.
Damnit!! You beat me to it
Same)) 5 mins of the total perfection and then two red wires) I guess we all noted it because of this contrast.
Fellow me guys 👌👌
Watching that solder flow is sort of fantastic.
Your works have been a school to me, keep it going! Thank you & congratulations!
Glad to hear! Thank you!
I loved it, looking forward for more similar projects
This took SOLDERING IRON to a whole new level
I keep seeing the tiny, tiny hairs when you place components for soldering and think you should DIY yourself a laminar flow hood. I love watching your videos. Just seeing you go through the steps is kind of inspiring. I would have never thought I could SMD solder but here I am having ordered a hot-air rework station... yay, rabbit holes!
had to do the same thing when propagating mushrooms. 100% with the hood.
@@cbriangilbert1978 what the hell, how is this even related
@@Everflamen It stops contamination. A single eye lash may not harm a PCB but it will kill an entire spawn of inoculated spores. IF it works for mushrooms it will definitely work for this.
@@cbriangilbert1978 What
@@Threekayz I don't understand why this is so hard to understand. The original poster mentioned seeing little hairs and said he should get a laminar flow hood. I then commented on how well they work with fungi propagation and that if it works with that it will definitely work with this. You guys must either be trolls, high, or just don't read before you comment.
never seen a iron used for soldering but i love it :D
now its a soldering iron
@@2de1oyun 😂😂😂
and the guy who made this is Iron Man
Didn't know you had a RUclips as well. Happy to have seen this in my recommended
Awesome job! Always being my inspiration for electronics projects! I hope to talk to you about ideas and projects someday !
wow that"s look fancy, even it only play GIF's Images, still a cool project
The iron soldering stage ! wow what an amazing idea 💡
The appearance of electronic parts during welding is interesting ☺️
BTW it's not welding buddy, it's soldering
@@thippeshdr631 different names but they refer the same thing actually!
I randomly saw it on instagram and today found it here,
i love the design
Liked your idea with iron to solder the PCB. Great work!
Really great project, thanks for sharing with us!
Nice project, very good job, congrats
Beautiful nice and compact design. So many items packed on a tiny little board.
Wow that's an amazing and beautiful project!
Every thing perfect and professional the use of press iron was an awesome job 👍
It looks so professional and futuristic 😆
I'm thinking a three way pattern in swiping your solder paste may help. Fills in the voids of the stencil. They calculate the area so that the proper amount of paste is applied. I think solder content would be a requisite for purchase of a paste too. Nice work. :-)
I am really love the design and It looks awesome!
It looks so awesome!
Big love to your works ❤️😊
I died on DIY hotplate soldering station.
I admire your great work though!
Want to get to this level some day.
this is by far the best ad i have ever seen pcbway wooww
I love the first music ! And the third !
Yes, would like to know the doing names!
Love the Badgers! Good memories!
Loved the SMT Soldering
Finally video. Following through insta.
Nice work. Love the display. Got a link to the solder paste you used?
Oh my god,another superior embedded developer❤..
I also breath everyday for beautiful circuit like yours..😍
My god i never though on that iron idea, brilliant!!!
And actually it is working pretty good!
It can not be ceramic iron, it must be of metal. I found it out the hard way.
@@dekipet Why that?
Step 7... what are the things you check in a "complete electrical check" before powering? shorts between power and ground?
That has to be one of the cutest-looking gadgets I've seen. If you could make removable storage (preferably micro SD to keep it compact), and maybe a better processor you could have yourself a mini movie player console.
Only two words: so clean
You are awesome 😎👍🏻 i love you and your videos 👍🏻👍🏻
Yet another amazing project 🔥
You're my hero guy thanks for the wonderful job
This is so great, that's what science bring
So f***ing epic. Love it. Great work. Maker MöKö 4 Eva
😁😁 vielen dank für die blumen
Awesome work
nice, u are very talented :)
Work of Art
Great video, very skillfully done! Please can you share what smd and soldering related equipment you are using, some of the vices you were using look very useful too. I am still trying to get a handle on all the equipment I need and what I should go for?
Have you thought about making a digital video transmission system? You pretty much have the basics on that board.
This would be a huge opportunity in the drone FPV market, now that DJI have left it, no longer making the DJI FPV goggle.
There should be a new standard of GIFs with ogg vorbis sound whereby you get 9 markers into which you add 8 sounds to trigger (the first being deprecated when the 9th plays). So you have 8channel sound if needed when played simultaneously, or 9 played one after the other at timeframes throughout the GIF duration.
Soldering iron station was amazing
New sub here. Awesome job you did. Thank you for sharing with us.
Great soldering skill
Best smt channel on RUclips
Great video and beautiful realization, but you could use a black wire for the battery negative.
Wow, good job! you are a pro!.
Sick man!! 🔥 looks a lot like Something mike rankin made
Indeed! He is always a great inspiration 👌🏻
Hello, very good job, but I see a red wire bridged between a transistor and the voltage regulator, could you explain what happened there in that part of the circuit? Thank you so much.
You deserved a subscriber 😉
00:45
Solder paste meets PCB
.
How romantic 😢🥺😬🔫
The video was awesome! Gonna tell where you find components, that would help
That ironplate is the winner of 2021!
Great video and Channel👍👍👍🙂🤝
Take my money
Take my money
PLEASE !!!!
I loved every single piece of equipment I saw in the video, I love your work , you did it great , I love the final result , it s awesome .
I had problem with M5StickC delivery in my country but I think I will seek for your project , I love the low profile of this device
Can you please share what type of flux you were using for soldering of the TFT? Im still looking for nice flux that yours seemed to work pretty well
so professionally done, especially doing SMT and soldering, but just the OCD in me, the Red and "Red" power cable from the battery, what happens to the black wire?
Personally, I would have used 2 black wires for the battery, maintaining the stealth look. What was the mod you had to make at the top right?
Love your work. I have a few questions regarding schematics. Is a MOSFET truly required there? Battery protection datasheet claims reverse voltage protection. Is MOSFET there just in case or it really doing it job? Are protection IC and charging IC "playing well" together? Thanks in advance
Too much time in post video production, not enough time answering comments. Good questions.
Nice desk
This is good for production, make them as kits... I would love to support by having physical stuff designed by you.
Nice video! May I know how to make the antenna part? What information should I look for? Thank you very much!
this is a really exciting thing to consider - so if it's a wifi remote, could we guess that it's for things like smart bulbs and LEDs ect? If I was going to make this myself, would I just sniff what the dedicated app was doing over wifi and program this to do the same thing? subbed straight away I love custom slick PCBs
Nice job
Im subbing so hard right now, heck, I'm even clicking the bell
thats really cool
2:00 can't believe your desk is this clean 😁😁
Your video is really awesome. I learned a lot from your video.🥰🥰🥰🥰
That, was very cool!
Handle the boards by the edges prior to soldering. Any grease from the fingers touching the board will contaminate the OSP finish making soldering much harder.
Super awesome. But what will you use the final device for?
Initially it was built to be a smart remote in my camper van. But I‘m sure that I will use it somewhere else!
Very good , excellent work
I would have attached that batter to the board with some double sided tape so it would have stayed still while soldering. I also envy your ability to hand place the parts, I would have needed a good binocular magnifier like surgeons wear to have been able to do that!
I also really like your homebrew hot plate soldering jig. Can the plans be modified for US 120 vac power? I know I can find a used/serviceable iron at Goodwill.
He is using a digital microscope, can grab them on Amazon for under $100
Electronics have come a long way. I started off with valve circuits and high voltages ,then through hole pcb to were we are now. Micro electronics and just about all digital. At 70 years of age I am pleased to have had hands on experience with all of this. Can't wait to see the next step. Maybe fibre tracks instead of the gold tracks.
How you doing today?
Great work 👍👍👍🔥❤️🔥
Nice soldaring
Amazing, good job bro
Any reason you chose PCB way over JLC for a simple prototype board? I find for prototyping their slightly lower quality doesn’t really have much of an impact
What brand is that lead paste? And how much working temperature can it handle?
1- Music selection is perfect
2- Badger badger abdger mushroom mushroom :)
This is ART ❤👏👏👏
What happened between 3:50 and 4:05 ? I’m beginner and want to learn best way how to use hot plate etc and solder small components. I see that flux after you took PCB from your DIY hot plate start changing consistencies. Is this because earlier it’s been heated up and when it cools it connects the components to the board?
Nice work! I'm impressed of your DIY solder station. When you design your PCB how many layers do you use?
The software was EAGLE CAM, showing only 2 layers (top and bottom). EAGLE is free to use if you only make small 2 layer boards in small batches like this, and PCB houses like PCBWay also encourage 2 layers strongly with the prices, so it's pretty common to stick to that constraint.
It's beautiful work
Simply beautiful :D
Rosen sind rot. Veilchen sind blau. Die WiFi-Remote ist cool, das weiß ich genau😂
😂😂 Sehr kreativ! Vielen Dank für die Bereicherung am frühen Morgen!
@@makermoekoe 😂
Hola muy buen trabajo, pero veo un cable rojo puenteado entre un transistor y el regulador de voltaje, podrías explicarme que paso ahí en esa parte del circuito? muchas gracias.
Good job Worthy of being liked and subscribed. I could not find the link made hotplate soldring station ?
Very nice!
Very impressive! 😀👍
This is a really awesome project. I love the detail on the PCB. One quick question though, what PCB software do you use and how many layer PCB is that? 2 or 4 layer?
Thanks man! I am using Autodesk EAGLE for years now. This is just a 2L board
Cool work dude, wishing some day your soldering habilities, where do you find the music for your videos?
Free RUclips music online
Anyone knows what kind of button that he used?
Looks really tactile
Great work!
The iron for heating is very good, how to make it?