Dino Man friends, cheap tint jobs to practice. Made use of all social media. Left my full time job within one year, that was 5 years ago. Feel free to check me out of you want. Kickincustoms.com
so this was what I thought; you can buy the solution from Sun Distributors or whoever and mix it with water in the tank and pressurize it with a compressor or air tank. I like the swivel for the spray head and the coil to help keep the end from kinking up. I was on Sun Distributors website the other day looking at their water tanks. They have 5 gallon tanks now and you can put your own logo on it; I thought that is pretty kewl. I never liked the coiled up hoses much. They're more inconvenient than they are convenient! Glad I saw this video; it answered a few questions I had about the water tank set ups. I never would have thought a filter would be in the nozzle; I would think it would be down by the tank! It would make more sense to me and keep the hose cleaner.
yeah, I was thinking tape the threads when you connected the piece to the nozzle the hose compression fits to, but I couldn't tell if there was a washer in the brass female end.
I like the video but I noticed a few things in the comment section…. You did not list where to get the spray nozzle and you posted where to get the filters. But whenever I looked them up…. The Company is no longer in business? Thanks 🙏
I’m about to buy one of these. Can’t decide on a 3 or 5 gallon version. Both fully equipped were talking $20 difference. There a reason you would go the 3 over the 5? I use Tint slime so no need to clean out daily like Baby Shampoo. I just can’t decide. I’ll use it for mobile. But also hooked up to air on a regulator for in shop work. So makes me lean towards 5 gallon
Please reply please i have an issue with golf 5 6 7 en other volkswagen the dot matrix on the back window doesnt stick good even with sanding and glue do u have any advise please reply!!! Thanks in advance love the vids keep up the good work 👍
Dino Man it's almost always fine for the smaller even dot matrix boarders around back windows and quarter windows. You can point at any other aftermarket tinted car on the road and you will see the exact same thing.
I think is the best time for my questions. 1. Is the water not bad for inside the door when you spray it? 2. After tinting how long should I wait untill i can roll down the windows again?
No, the water isn't bad for the inside of the door. There are drain holes at the bottom to account for some water in the door. Like rolling wet windows down from a rainy day. You should way at least 3 days before you can roll your windows down after tinting them but in colder climates i'd suggest waiting a week. Its personal preference on how much. just a decent squirt really. I'm trying out another slip solution to avoid that scummy buildup again.
2 oz of slip per 1 gallon of water sometimes little less sometimes a little more it’s really preference on how much slip u want if your tinting outside or inside if it’s hot or cold just depends on your situation tbh
I think I'm using the 100 and it's been good. The 50 mesh was letting some scum buildup slip thru but I haven't had that problem with the 100. 200 is perfectly fine.
how do you get to work around hard windows for tinting? I just started and I am scared some windows is hard to cut like window visors or nissan pathfinder rear windows they have circles on the inside how do you work on those?
The circles are cut out on the outside and of the object on the I side can't be removed you have to make a small splice in the film so it wraps around the obstacle. Just takes some practice, we all make mistakes figuring stuff out
Umm a good squirt? Lol hard to say exactly. Enough so it slides around some and tack up quick after u squeegee it. If it keeps sliding a lot after u squeegee then it's too much. It doesn't need to be exact, just play around with some square pieces on a piece of glass
TintStuff ok im just wondering how to adapt because i have thicker hose...how much is hose ,swivel and tip and 100 micron filter all together $$$ ??? I have 5 gallon tank already
lol no, the little green light turns on when you have your foot on the break with the car off. it shuts off when the vehicle starts. From a video standpoint i should have reversed the footage.
That was the most cinematic footage of dish soap and a sink I've ever seen in my life.
Haha, yes! Trying to make the mundane interesting :)
Video editing skills have improved drastically, keep up the good work!
Happy to see you are back. You were a huge influence and a great help in getting my business off the ground.
xnidanx how did u start gettin customers
Dino Man friends, cheap tint jobs to practice. Made use of all social media. Left my full time job within one year, that was 5 years ago. Feel free to check me out of you want. Kickincustoms.com
Great video
Where can I purchase the equipment you just showed on the video?
so this was what I thought; you can buy the solution from Sun Distributors or whoever and mix it with water in the tank and pressurize it with a compressor or air tank. I like the swivel for the spray head and the coil to help keep the end from kinking up. I was on Sun Distributors website the other day looking at their water tanks. They have 5 gallon tanks now and you can put your own logo on it; I thought that is pretty kewl. I never liked the coiled up hoses much. They're more inconvenient than they are convenient! Glad I saw this video; it answered a few questions I had about the water tank set ups. I never would have thought a filter would be in the nozzle; I would think it would be down by the tank! It would make more sense to me and keep the hose cleaner.
Great video!!! Beats the crap out of hand spray bottles
yeah, I was thinking tape the threads when you connected the piece to the nozzle the hose compression fits to, but I couldn't tell if there was a washer in the brass female end.
So glad you’re back!! 😜
You’ve changed a lot, and your videos are even better! Can’t wait to see more content🤩
The new Orange 4x tint slime works good 42 bucks gallon!!! Dragon distributor carries it...
I like the video but I noticed a few things in the comment section…. You did not list where to get the spray nozzle and you posted where to get the filters. But whenever I looked them up…. The Company is no longer in business? Thanks 🙏
I’m about to buy one of these. Can’t decide on a 3 or 5 gallon version. Both fully equipped were talking $20 difference. There a reason you would go the 3 over the 5? I use Tint slime so no need to clean out daily like Baby Shampoo. I just can’t decide. I’ll use it for mobile. But also hooked up to air on a regulator for in shop work. So makes me lean towards 5 gallon
Thanks man you taught me how to tint
The Teflon tape is made for gas. It is a little heavier duty than the white stuff. And it looks cool.
It does look cooler than just white :) Thanks for the parts!
Sun Distributing will this stuff fit on 5 gallons tanks
Great video what is the 360 fitting the you use to connect to the brass
Where did you get the tank from?
nice video. love the editing.
Winning! :) thanks
Tint slime ultra is the best worth every penny !!!!!!
Love your new videos brother. Great job. 🔥💪
Thank you! I've been a big fan of your videos too!
Thanks
Please reply please i have an issue with golf 5 6 7 en other volkswagen the dot matrix on the back window doesnt stick good even with sanding and glue do u have any advise please reply!!! Thanks in advance love the vids keep up the good work 👍
+Dino Man I have yet to find a perfect solution for the dot matrix. They always silver out around the boarder
TintStuff thanks for the quick reply my boy👌
so when u guys tint at the shop customers dont complain about the silvering ?
Dino Man it's almost always fine for the smaller even dot matrix boarders around back windows and quarter windows. You can point at any other aftermarket tinted car on the road and you will see the exact same thing.
TintStuff thanks for the feedback subscribed 👍
Can some 1 send me the link for that brass gun with that tip please!!!!!!!!!
Can you show how to do a windshield please
I know this video is dated but the links you provided for the parts used in the video are all broken.
Is the teflon tape also from Flexzilla? It looked like it was about the same color as the hose.
That was actually coincidence lol any teflon tape should do.
Just wondered, EVERY other teflon tape I've seen is white.
Me too, no idea why we had a yellow one lying around lol
The Teflon tape is made for gas, it's heavier duty but mainly because it looks cooler than white
Question: Does the type of window film (3m, huper optik, etc.) actually have a difference in quality or would you suggest buying any quality tint?
Seesaw Sleep suggestion idk about brand but definitely go with ceramic tint if you live somewhere hot!
Do you need a compressor for that ?
Can I use a keg that says no more than 60 psi for tinting?
I broke two of those black 3 gallon nozzle. Very fragile. Not good.
I think is the best time for my questions.
1. Is the water not bad for inside the door when you spray it?
2. After tinting how long should I wait untill i can roll down the windows again?
And 3. How much baby shampoo you use for the 3 gallon sprayer?
No, the water isn't bad for the inside of the door. There are drain holes at the bottom to account for some water in the door. Like rolling wet windows down from a rainy day.
You should way at least 3 days before you can roll your windows down after tinting them but in colder climates i'd suggest waiting a week.
Its personal preference on how much. just a decent squirt really. I'm trying out another slip solution to avoid that scummy buildup again.
tips.....when you use two hose clamps don't put the heads in the same direction
how much soap do you add in the 3 gallon tank well your new tank? @TintStuff
2 oz of slip per 1 gallon of water sometimes little less sometimes a little more it’s really preference on how much slip u want if your tinting outside or inside if it’s hot or cold just depends on your situation tbh
where can i get a steelspraygun??this is korea...i am the tinter
Very helpful video...and you just took away a lot of excuses not to do it the right way!! Thanks Tint Stuff!!
What do you think about 200 mesh filter thinking on getting one brotha ???? Super fine filter i guess
I think I'm using the 100 and it's been good. The 50 mesh was letting some scum buildup slip thru but I haven't had that problem with the 100. 200 is perfectly fine.
TintStuff ok 100 or 200 good...
Where do you buy brass tip and hose and filters???
Parts used in this video!
Flexzilla Ball Swivel: bit.ly/2Fm8EBS
Flexzilla Hose: bit.ly/2GlC9VP
100 Mesh Filter: bit.ly/2nkKErH
TintStuff thanks man for real!!!
How much pressure do you run in your 3 gallon tank?
2 gallons of water and 80 psi should do fine
The brass nozzle is not good. Besides it didn’t have filter. . I like the 3 gallon plastic better.
how do you get to work around hard windows for tinting? I just started and I am scared some windows is hard to cut like window visors or nissan pathfinder rear windows they have circles on the inside how do you work on those?
The circles are cut out on the outside and of the object on the I side can't be removed you have to make a small splice in the film so it wraps around the obstacle. Just takes some practice, we all make mistakes figuring stuff out
How do i talk to you tinting live i downloaded that app link ???
what should i seach for in amazon??
What is your water to baby soap ratio in your 3 gallon tank?
Umm a good squirt? Lol hard to say exactly. Enough so it slides around some and tack up quick after u squeegee it. If it keeps sliding a lot after u squeegee then it's too much.
It doesn't need to be exact, just play around with some square pieces on a piece of glass
I tinted my windows and I have bubbles around the edges how could I get rid of them
Debris man. Need to clean more or you are over cleaning. I made that mistake as a Noob.
Does that filter catch all baby shampoo soap chunks???
the 50 mesh filter didn't but i'm switching to a different slip solution to avoid buildup like that.
TintStuff tint tac or Tint slime
What kind of brass sprayer is that one ?
Sundistributingdirect.com has them. Teejet is the brand
Thanks bro i appreciate your help! #tintlife
9,5 litros ? 3 gallon
Will this hose fit on 5 gallons tanks??
Yes
TintStuff ok im just wondering how to adapt because i have thicker hose...how much is hose ,swivel and tip and 100 micron filter all together $$$ ??? I have 5 gallon tank already
Sundistributingdirect.com has all the parts you need. They can also tell you more info
TintStuff ok
That hose holds like 1 litter of water.
That hose holds half gallon of water.
Holy shit dude that build up lmfao , where would i get a tank?
insanechevy91 haha yea it was really bad.
sundistributingdirect.com now offers the exact setup I used in the video.
Did you just turn off your car? Lol
lol no, the little green light turns on when you have your foot on the break with the car off. it shuts off when the vehicle starts. From a video standpoint i should have reversed the footage.
Where do you get the brass sprayer from?
Thanks
www.sundistributingdirect.com/tools/brass-nozzle-for-pressurized-tanks