Это видео недоступно.
Сожалеем об этом.
Check Engine Light? Camshaft Position Sensor Circuit High Input - Code P0343
HTML-код
- Опубликовано: 1 июл 2020
- The check engine light code P0343 indicates that there is a problem with the electrical circuit in the bank 1 camshaft position sensor. Other symptoms you may notice include a bucking or surging engine, engine stalls, or the engine not being able to start. In this video, Andy explains the purpose of the camshaft position sensor, and then shows you how to diagnose electrical problems with one. The information applies to camshaft position sensors from other banks also, if your vehicle has them.
Check out some of our other great diagnostic videos that you can do at home:
• Driveway Diagnostics!
Watch more of our check engine light specific videos here:
• Check Engine Codes - D...
For More Info visit us at 1aau.to/h/cc3/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
This by far the best video I have ever watched while trying to learn as I go working on mine and all 3 teens cars. I can pretty much do it all these info videos make me 100% kno that I can diy!!! Thank u for this
After replacing the sensor like. 2 times engine light keep coming on camshaft position sensor
This is a good video - simple, well explained, to the point, makes it fun to learn. Good videography too.
I put a new camshaft position sensor on my 2002 chevrolet silverado 5.3l and now my engine light came on and I'm having starting problems and it backfires, why is this happening ?
Have the same problem
been dealing with the code fir 2 weeks ! Seen this and I am now not as stressed about it! 🙏
+FORK Brett Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Does the brown/white wire have power when keyed on as well? My red wire on my sensor pigtail is reading 10.36v but no power from the brown/white which is pin 73 on blue side of ecm. I did check for continuity and there is solid connection
Great Job Andy!
+Roger Rivera Thanks for checking us out! 1AAuto.com
Can this cause a p0300 multiple random misfire code?
The code throws randomly on & off & it had been throwing it for a while before it finally gave me the camshaft position sensor code...
Am worried it's actually something else since it has been throwing the p0300 misfire code for some time before it threw the camshaft sensor code.
What if you have a sporadic count ? Like it'll jump up to 260 than to 5 than 0 than back up again. I'll cleae the code and than start the vehicle back up and it'll count properly . What could that be ?
Good explanation bro, good job
+Solomon Mengisteab Thanks for the feedback!
Very good video. Gave me exactly the info I needed. Thank you!
That's all fine and good but what if it's not the sensor and you dont get the right volts in the wires. Could you please do a video that covers the what if it's not a simple fix?
Yes I'm not getting 5 volts on signal wire ..what controls that ? PCM or ECU?
This is my problem too. Thinking I’ll have to give in and take it to a mechanic.
+1A Auto Parts This is a great series! Can you please post a version for P1457 and go over all potential fixes, including those beyond changing out the canister and valve? I still have the code after swapping those parts and I don't want to just keep throwing parts at the problem. Thanks in advance! I have a 7th Gen Civic 5MT sedan.
+Cinca0989 We do not have a video for this right now, but we'll keep this request in mind for a future video! 1AAuto.com
I have a P0367 camshaft position sensor 'B' circuit low bank 1 on my 2007 Cadillac CTS, can i get some help about it??
There are many obd2 code readers. Prices high to low. How do I know what reader I need to diagnose this issue? It seems it might be cheaper to just replace the sensor (just in case) rather than spending money on an OBD2 code reader that may or may not have the capacity to diagnose this issue?
Great...thanks for the info...
Would you please make a video on fault code no. P2096 & P2098...and how to fix them...... Thanks again....
+Mahmoud Al Shawi We're always cycling through common cars. We'll add this repair to our list! 1AAuto.com
What do you do if it is the wiring? Can you show an example of how to replace that?
Every little helps in reducing the cost of car repair.
+Tom OConnor Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1AAuto.com
So if the cam sensor pickup a fault with your camshaft in my case camshaft is slightly bend, would it keep the fire of ignition also away? I replaced my damaged engine with an import one.
Good video I have a 96 Toyota Camry 2.2 and the camshaft sensor connector is broken on the clip and I can’t find a replacement. Any tips on how to keep the connector in place ?
I'm confused, when your testing are you testing all 3 wires at the same time or just 2 at at a time? with a muti meter you say test between the pink and the black wire... and the red wire? Then with the test light you say to test between the pink and black wire.... and the red wire?
Do you have a video on crankshaft position sensor how to take off of Buick Enclave 2011?
Can this cause a p0011 code? I have this code and I've changed everything the solenoids cam phasers timing and engine oil cooler and the p0011 code keeps coming back about there days after getting reset and my car is not run to well but still drive able
Having same problem with my 6.2 Chevy motor. replaced everything wires good. Heard with the LS motors might have change our whole camshaft and VVT solenoid.
For a Prius can this set off the check hybrid system as well ?I have a 2011 Prius.
I worked on a 2015 Hyundai Elantra that was a crank no start. Had a code for bad camshaft sensor. Checked the wiring and it was good so I replaced the sensor. Even with a new sensor, the computer wasn't reading where the camshaft was. I was stumped. Told my customer it has to be the computer but get a second opinion from the dealer. I told him to keep me updated
I have code p0348 ! I already relaxed the camshaft sensor and the housing but the code still pops up! Any ideas ???
P1362 and P1361 on 2002 honda civic lx , I changed the camshaft sensor and still after engine warms up the code and limp mode come right back. Any suggestions? Bad new cam sensor?
Or what else could cause those codes to come back. Thank you.
I have 215k miles no codes changed mine with Delphi due to valley pan leaking now i have 2 codes p0342 and p0343. 06 silverado 6.0L
Thank you
+glen Decuir Thanks for checking us out! 1AAuto.com
Are one of the symptoms vibration after you brake and a humming sound 🤔
I replaced my sensor in my 03 envoy xl but I'm still getting the sputtering as before and I don't have all the gadgets and computers to check it nor can I afford to check it sadly
I have replaced a camshaft sensor, now i get a p052b code any help? Its on a 2015 rogue
I keep getting the code P0365 that's showing pending on my scanner. When I start the car the engine light stays on until I clear it but the code P0365 Shows pending still. I have change all four of my camshaft position sensors. I didn't know which one is bank 1 and why I'm still getting a code.
I replaced my sensor and light didn't go off, runs good but takes a few seconds to start, when I used my volt meter between red and black/pink it didn't read anything, but when I went between red and brown I had 10.5 V. Also when used my test light between red and black/pink it didn't flicker or anything. What could it be?
+@tobylillie6540 We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Show me a video on a throttle position sensor for a 1999 Isuzu Rodeo 4 cylinder I'm getting too much voltage
Very helpful vedio good job 👏
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍and thanks for the video🙏✌
+Salvador Gutierrezr Thanks for checking us out! 1AAuto.com
I have a big problem in my car Subaru Outback 2010 each time i hat the brake the car trun off i don’t know the problem and I don’t have check engine light
+John Saad We would suggest consulting with a reputable local mechanic for a diagnosis of your vehicle.
I have vw polo 1.2 mpi petrol engine
know need to change v belt i want to know i change only v belt or with tensioner my car run 90k km
+gurpreet singh We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1AAuto.com
What was that yellow wire connected to or was it connected to nothing ?
Just replaced mine and now I have this code also my vehicle 2010 traverse has two different types could that be a cause for this code maybe wrong part
+Greg sarro We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Got this code p0343 & p0740 was stuck on the freeway
Hi,, i have problem ASC CAN timeout / not equipped on pajero sport dakar limited
+Rardy Supranto We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
But why did you not check between the signal wire and the positive wire? You haven't checked if the signal wire is ok.....
I have a 2012 Dodge Ram with 5.7 liter.
Cam sensor comes on with traction control light.
I've changed the sensor three times.
Why does the cam sensor code come on with traction control light?
What do they have in common ?
Very confusing
Could you have this with no codes or light?
My code says Circuit high and circuit low WHY? I can’t figure it out.
Im looking for this answer also
Is it a good idea to buy tools from "wish "?
So if I change the sensor and keep getting the same code does that mean my harness is bad
+GTAfanGTA We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
👍
Ok
My code came up to p0340
I need a computer reader
Andy didn't build that model.
+IcheeyBallzac Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
The problem with your videos are you don't want to show how it will be done. So if you want more people watch you. You have to start to show how it will be done
+reality today Thanks for the feedback!
Thank you