Hey Patrice, what fume extractor do you have connected to your DTF oven? I have the same oven, and those fumes burn my eyes. I tried one extractor, and it didn't work. How is the one you are using?
Vevor vinyl cutters have a major flaw. I know I have owned two. The pinch rollers dig into the material. Its fine if its a small piece you only use the rollers on the edge of the material but when cutting larger pieces you need the center pinch roller so it tracks. You get what you pay for!!
This was a great unboxing. I do want to get a bigger cutter eventually but wasn't even sure where to begin especially with price. Does VEVOR have a suggested cutting setting guide somewhere? Will it cut without being on the stand?
thank God I found your video You've been so much help because I just bought this vevor cutter i have a youtube channel but it's on motorcycles and rallies so I'm aiming my t-shirts and logos towards that kind of stuff
Hey craftable things this is the cutter I asked about and the software a few months ago I been had mine about 3 years Wasn't for sure how to use the software And where to put the pinch rollers So this was very helpful To me on where to put the pinch rollers thank u for sharing 😊
What do you have the cutter pressure set on? If you set it to 20 try 30. You can hand set and test cut over the areas you already cut if it didn't cut through. The blade can also be set to different heights for depth. I have one that is pretty much the same I got it in 2011 from uscutter. I love my machine it's 55 inch but I had to buy romeo cause I broke the arm on mine and can't get a replacement for this one.
@Marianne Ciovacco I actually do like it. I wish it did the larger print and cut for the full size though. Guess we are just waiting. The cutter I have like hers didn't come with an eye and doing a contour cut with it is kind of out of the question. Lol. The one she has will do giant signs and banner vinyl as well. I do large company awnings in silhouette vinyl and have never used more then a 24 inch roll.
Hello Craftable Things great unboxing, Have you continued to use the cutter and to do it all over again, would you buy it again? I am looking to get my daughter one for Xmas, it'll be her 1st one.
I have the same machine. Haven't done anything except the test print, lol. I've had it almost a full year now. I'm gonna pull it out this August and make the decorations for my grandbaby's 3rd party. I use my cricut for everything, but since I can only go so big on the cricut I have... I gotta call in reinforcement 😂
Hello beautiful thanks for sharing. Your craft room has to be huge you have so much good equipment❤❤❤❤ God bless Which DTF large format and budget friendly do you recommend
hello i have the VEVOR Vinyl Cutter 34 Inch Vinyl Cutter Machine with 20 Blades Maximum Paper Feed 870mm Vinyl Plotter Cutter Machine i need the 8 mil vinyl thats 34' wide do you know where i can find such vinyl im looking to make stencils
This is just amazing! Do you think it is useful to cut/print just paper patterns? I am a patternmaker and looking for a budget tool to print/cut my sewing patterns. Is it possible to substitude the knife with a pen to print/draw on paper?
It's not meant for flock...it's for sign making, hence the name of the software SignMaster...but thanks for letting me know it does cut flock...I've yet to inbox mine... just got it... waiting for space...lol.
And I thought I was bad 6-7 months lol. But that’s a huge cutter. Love the shirt 💕
Thank you for the review! That machine is gigantic!
I've been using a vevor cutter for years. When using thinner vinyl your force can been 60 but your speed can go up to 800 to cut right.
Thanks so much, LaVeca! I will use your advice. I plan to use it more.
@CraftableThings I'm still working on flock setting. But vinyl I have that part down pack.
I think it’s VERY nice!!! I can think of several ways to use it.
Very nice!
Amazing work in that shirt! Great video thanks!
Thank you!
Hey Patrice I like the machine and it prints large that is so good I can't wait to see you cut flock on it also. Good review. Thank you for Sharing!!
Thanks so much
I have this cutter in 24" and haven't used it since I bought it in 2020 😔. Thank you for this, cause Cricut moving too slow for me
I love love love a good cardigan!! Looks nice! Ok, back to the video😆😍
hahahaha!!! Thanks, sis! I literally walked in from work and was like "let's get this done".
@@CraftableThings You're welcome!! You got it done, sis💪🏾💪🏾💪🏾
Hey Patrice, what fume extractor do you have connected to your DTF oven? I have the same oven, and those fumes burn my eyes. I tried one extractor, and it didn't work. How is the one you are using?
Vevor vinyl cutters have a major flaw. I know I have owned two. The pinch rollers dig into the material.
Its fine if its a small piece you only use the rollers on the edge of the material but when cutting larger pieces you need the center pinch roller so it tracks.
You get what you pay for!!
This was a great unboxing. I do want to get a bigger cutter eventually but wasn't even sure where to begin especially with price. Does VEVOR have a suggested cutting setting guide somewhere? Will it cut without being on the stand?
thank God I found your video You've been so much help because I just bought this vevor cutter i have a youtube channel but it's on motorcycles and rallies so I'm aiming my t-shirts and logos towards that kind of stuff
thank you so much for watching. I glad this was helpful. Good luck in everything you do.
Thank you for reviewing this product for us!
thanks for watching, Mar Bear!!
Thanks for sharing! And those shirts are beautiful! 🥰
Hey craftable things this is the cutter I asked about and the software a few months ago I been had mine about 3 years Wasn't for sure how to use the software And where to put the pinch rollers So this was very helpful To me on where to put the pinch rollers thank u for sharing 😊
Great video. Will this cutter enable colored, photo sticker making to mass produce?? I'm new to this and looking for a good machine.
Great work!
thanks for the review, this looks enormous!
You can use a lint roller to remove the cut outs.
Thank you for your review. I brought the 28"
Thanks for the review. Can you print then cut?
It's a big learning curve
Oh my, show us show us😀
Hey Mar Bear!
WOW ! This is awesome! Thank you for sharing :) Great skills!
Thanks for this video. What cords did you have to connect to your computer?
What do you have the cutter pressure set on? If you set it to 20 try 30. You can hand set and test cut over the areas you already cut if it didn't cut through. The blade can also be set to different heights for depth. I have one that is pretty much the same I got it in 2011 from uscutter. I love my machine it's 55 inch but I had to buy romeo cause I broke the arm on mine and can't get a replacement for this one.
do you love the Romeo?
@Marianne Ciovacco I actually do like it. I wish it did the larger print and cut for the full size though. Guess we are just waiting. The cutter I have like hers didn't come with an eye and doing a contour cut with it is kind of out of the question. Lol. The one she has will do giant signs and banner vinyl as well. I do large company awnings in silhouette vinyl and have never used more then a 24 inch roll.
Hello Craftable Things great unboxing, Have you continued to use the cutter and to do it all over again, would you buy it again? I am looking to get my daughter one for Xmas, it'll be her 1st one.
She’s going BIG 🎉 💜🥳
I have the same machine. Haven't done anything except the test print, lol. I've had it almost a full year now. I'm gonna pull it out this August and make the decorations for my grandbaby's 3rd party. I use my cricut for everything, but since I can only go so big on the cricut I have... I gotta call in reinforcement 😂
Hello beautiful thanks for sharing. Your craft room has to be huge you have so much good equipment❤❤❤❤ God bless
Which DTF large format and budget friendly do you recommend
I just purchased one. Does it cut foam boards?
Where can i purchase the 28 in or 34 in wide htv vinyl for this cutter?
this reminds me of my very first cutter from US Cutter
it's probably just rebranded. thanks for watching!
@@CraftableThings it's not the same brand
hello i have the VEVOR Vinyl Cutter 34 Inch Vinyl Cutter Machine with 20 Blades Maximum Paper Feed 870mm Vinyl Plotter Cutter Machine i need the 8 mil vinyl thats 34' wide do you know where i can find such vinyl im looking to make stencils
This is just amazing! Do you think it is useful to cut/print just paper patterns? I am a patternmaker and looking for a budget tool to print/cut my sewing patterns. Is it possible to substitude the knife with a pen to print/draw on paper?
Yes ther is a pen included with the knife. just remove the knife and place the pen instead
Will this cut leather?
What is the difference between vinyl and flock?
what force and speed did you use
Im thinking of upgrading from cricut maker 3 but im not sure if to get this machine or the siser romeo what do you recommend ?
Romeo
Great video!!! Thank you
Thanks so much, Marina!
Can this cut fabrics
Nice job on the oh so blessed.
is there an over cut option in the software? that would elimate the little uncut spot on your flock circles
It's not meant for flock...it's for sign making, hence the name of the software SignMaster...but thanks for letting me know it does cut flock...I've yet to inbox mine... just got it... waiting for space...lol.
It’s a vinyl cutter…just like cricut, graphtec, cameo & Romeo. They all cut flock…even though that’s not what they’re intended to do.
Do you need a different program to cut rhinestone templates
No, you don’t
❤
hey Josie!
Do you have to reverse your lettering when using the Vevor?
it depends on the material you're cutting.
Hello friend does this machine cut silicone vinil ?
where did you find silicon vinyl?
HOLA FELICIDADES POR LA ADQUISICION .
congratulations
nice size
thanks
whaaaaa!!😮
🤦🏽♀😆GNOMIEEE 6 OR 7 MTHS AGO
😂😂😂
OMG
Hello
Hey Marco!!!
very niceeeeeeeeeeeeeeeeeeeeeeeeeeeee
You are going to run out of room😂
I already have 😂😂😂
The fact that you can’t use this with a Mac was severely disappointing