Thank you so much, Snazzy. You have been more than helpful. Only hiccup is I don't have the software or psn, because I got the cutter as a hand me down from someone.. Hopefully, the person can find the flash drive or cd. I am so excited to start putting it to work.
I just got one of these and quickly found your well informed tutorial. Wanted to expand beyond my cricut for my business, had her up and running and cutting out some designs by the end of the video. I dont know if it was the fact it was an informed video or the fact you used a hot girl for clickbait on the thumbnail, but im a fan and subscriber now lol!!! Great Job.
I put it on its lowest setting, and it’s still cutting through the entire vinyl. I couldn’t see your settings because it was washed out in the video. I have the exact same machine and the exact same role that you do any tips will help. Thank you.
Vevor vinyl cutters have a major flaw. I know I have owned two. The pinch rollers dig into the material. Its fine if its a small piece you only use the rollers on the edge of the material but when cutting larger pieces you need the center pinch roller so it tracks. You get what you pay for!!
Hi Snazzy Moon Design :Excellent tutorial. I have learned how this software works. I would like to know how to laminate the vinyl before cutting it. What software can be used to configure it for cutting?
I’ve been watching videos on this cutter. I’m thinking seriously about getting one, but I’m waiting to see your review. Also, I need to get it when I have that extra money.
I tried asking some questions via the Vevor web page's listed support email address and the toll free phone number. The phone number doesn't work and both emails I sent had delivery failures. I finally did get in touch and had a number of my concerns addressed.
Hey I need to ask a question I’ve just got this cutter mine is a 28 in but I am downloading the software signmaster , but my model number is not in where it tells you to put the model number as your download it. What do I do with that point can you please help me
Hi @SnazzyMoonDesigns Amazing Video Thank You!!! Do you know how to factory reset this model? I recently got my hand on a similar model but somehow it has a password in the settings. It's hard to find anything on the model online
OMG, I have this exact plotter and could never find any help. I did purchase the upgrade Signmaster software, but thats it. The upgrade is a whole lot more in-depth and confusing. It kinda thinks you have a laser light. Anyways, I really hope that you continue to share videos as you are learning.😊
Here are the specs from the website. Cutting Capacity: With maximum paper feed of 870mm (34.3"), maximum cutting width of 780mm (30.7"), cutting precision of +/-0.01mm (0.0004") and paper feed precision of 3m (118").
Great video!! Thanks so much for sharing! I am about to purchase a Vevor vinyl cutter but I am not sure what the difference is between the Signmaster and the Signcut software. Are there any mentionable differences? Thanks a lot!
U helped me so much in how to set up but now i am having major issues with pics for decals i cannot get a hold of company but im losing money because i cannot insert my own pics PLEASE HELP with ur amazing videos
I learned more from this video than anything else!
Thanks for watching!
Literally, no one explains it better than this guy lmao
Thank you so much, Snazzy. You have been more than helpful. Only hiccup is I don't have the software or psn, because I got the cutter as a hand me down from someone.. Hopefully, the person can find the flash drive or cd. I am so excited to start putting it to work.
I need you to teach me how to use everything in our household!! Great video!! Thanks for all the info!!!!
Haha I wish I could do that!
Excellent Tutorial !
I just got one of these and quickly found your well informed tutorial. Wanted to expand beyond my cricut for my business, had her up and running and cutting out some designs by the end of the video. I dont know if it was the fact it was an informed video or the fact you used a hot girl for clickbait on the thumbnail, but im a fan and subscriber now lol!!! Great Job.
Glad it was helpful!
Thank you mine turned up last night and this I am sure will save me hours of fiddling around
Glad it was helpful! Thanks for watching!
Nice tutorial thanks
You are welcome thanks for watching!
thank you so much for making this video, super helpful
Glad it was helpful!
just what i needed to come across this tax season for my video . very well understood ! THANKS
Glad it was helpful! Thanks for watching!
You are amazing, thanks so much for the all the information. Getting mine in today, and I want to start ASAP.
I put it on its lowest setting, and it’s still cutting through the entire vinyl. I couldn’t see your settings because it was washed out in the video. I have the exact same machine and the exact same role that you do any tips will help. Thank you.
Great and well explained video GOD BLESS.
Glad it was helpful! Thanks for watching!
great job explaining the set up thanks
Glad it was helpful!
Thanks for sharing!🙏
My pleasure! Thanks for watching!
Can it be used for trucks and t shirts as well?
Vevor vinyl cutters have a major flaw. I know I have owned two. The pinch rollers dig into the material.
Its fine if its a small piece you only use the rollers on the edge of the material but when cutting larger pieces you need the center pinch roller so it tracks.
You get what you pay for!!
How much does it cost? I need one.
Thanks for the great video.
Glad you liked it! Thanks for watching!
Can this item cut different types of paper or just vinyl.....Thank you
Sorry I do not own this machine so I cannot answer your question. Thanks for watching!
Thanks for great video
Just got a sk720
How to know the exact media width. Have and old mimaki which measure the width and shows it on display.
Good evening, my plotter cuts the right side of the vinyl more, while the left one lines it slightly, how can I fix it? Thank you
is there a mirror option, there would have to be if it cuts HTV..
Thanks!
Welcome!
Hi Snazzy Moon Design :Excellent tutorial. I have learned how this software works. I would like to know how to laminate the vinyl before cutting it. What software can be used to configure it for cutting?
I’ve been watching videos on this cutter. I’m thinking seriously about getting one, but I’m waiting to see your review. Also, I need to get it when I have that extra money.
Thanks for watching!
Loved your setup tutorial. How do you do print and cut projects with this cutter? Is it even possible?
By using the software that comes with the cutter. Thanks for watching!
I was wondering if it will cut the circles off perfectly for rhinestone templates. Can you please let me know that?
Thank you.
It will cut any shape you draw in the software that is used to print. Thanks for watching!
Thank you sirrr
Most welcome
Thanks man, very helpful!
Glad to hear it! Thanks for watching!
do you use serial port instead of USB printer port
usb port
Which computer do you recommend?
there are so many it is hard to say
I tried asking some questions via the Vevor web page's listed support email address and the toll free phone number. The phone number doesn't work and both emails I sent had delivery failures. I finally did get in touch and had a number of my concerns addressed.
Sorry you are not able to contact them!
Hey I need to ask a question I’ve just got this cutter mine is a 28 in but I am downloading the software signmaster , but my model number is not in where it tells you to put the model number as your download it. What do I do with that point can you please help me
Unfortunately I do not have that anymore. I would try a few model number are close to yours and see if that works. Thanks for watching!
@@SnazzyMoonDesigns ok thank you
Can this used for heat transfer vinyl
yes! Thanks for watching
Thank you sir this saved me
Glad to hear that and thanks for watlching!
Do you have to use a mat with the vinyl or can I use a cricket mat?
The vinyl just feeds into the cutter from the roll so a mat is not needed. Thanks for watching!
Hi @SnazzyMoonDesigns Amazing Video Thank You!!! Do you know how to factory reset this model? I recently got my hand on a similar model but somehow it has a password in the settings.
It's hard to find anything on the model online
Unfortunately not. Thanks for watching
OMG, I have this exact plotter and could never find any help. I did purchase the upgrade Signmaster software, but thats it. The upgrade is a whole lot more in-depth and confusing. It kinda thinks you have a laser light. Anyways, I really hope that you continue to share videos as you are learning.😊
Great to hear! Thanks for watching!
Nice review. Whats the longest the cutter can cut? I have projects over 12 feet and was wondering if it could handle it?
Here are the specs from the website. Cutting Capacity: With maximum paper feed of 870mm (34.3"), maximum cutting width of 780mm (30.7"), cutting precision of +/-0.01mm (0.0004") and paper feed precision of 3m (118").
Very helpful for me a beginner. Thank you sir. I greatly appreciated & needed this video totorial 🫶
Glad it was helpful!
Can you print on a white vinyl and cut it also?
No this does not print.
What is the speed and force do u use for adhesive vinyl
I used the default speed and force. Thanks for watching!
Does this model have an optical laser?
No it does not.
Nice instructional. Will SignMaster software cut inside Adobe Illustrator? Thank you sir
I really don't know if it will or not. I do not have Adobe illustrator. Thanks for watching.
If Illustrator has a plug-in to support Signmaker, then yes.
Will this work on a laptop, or are the cords only for a desktop?
If you have a USB port on your laptop it will work! Thanks for watching
Thank you
You're welcome Thanks for watching!
Great video!! Thanks so much for sharing! I am about to purchase a Vevor vinyl cutter but I am not sure what the difference is between the Signmaster and the Signcut software. Are there any mentionable differences? Thanks a lot!
Sorry I am not very familiar with the software! Thanks for watching!
Es mucho mejor el signMaster!! Porque tiene más funciones que el signcut.
How does cutters from Vevor detect the registration marks from a printed vinyl sticker?
Keep up the good work 👏
Sorry I do not know! Thanks for watching!
mine has a laser next to the blade
He safe me, excellent video thanks 🙏🏽
Thank you too for watching!
U helped me so much in how to set up but now i am having major issues with pics for decals i cannot get a hold of company but im losing money because i cannot insert my own pics PLEASE HELP with ur amazing videos
Can you print then cut?
I am not sure if you can do that or not. There is a disc included that has detailed instructions on l how to operate this. Thanks for watching!
I when I issue test the cutter respond but you can't see it cutting
Make sure you are offline. The thumb drive that comes with the cutting machine has videos that may help you.
Is it flexi compatible?
Sorry I do not know you may have to contact the seller. Thanks for watching.
I didn’t get all that stuff with the one I bought!!! No vinyl, no catch “basket.” WTF?