This is great timing. I've purchased several of your patterns and given as gifts. I saw these acrylics yesterday when I was looking for the wet molds. It's great to actually see them in action. I'm new and only started designing my own, these will be a valuable tool.
I wonder if you could put some snaps on this, so you could take out the card holder part and just carry that when the situation calls for it, or place in another configuration of the card pocket if you needed more/less slots.
I’m new to leather work and have been struggling to make a solid pattern for a badge (law enforcement, fire, EMS, etc) wallet that can hold bills and few cards (6-8). Trying to keep the thickness down has been difficult as well. I’d love to see you make one or just provide some advice if possible! Your videos have taught me so much and gave me the confidence to start leather working. Thank you!
Great design. I've recently been playing around with a trifold concept (currently carrying a first attempt) and I think you nailed it. Money compartment in mine runs full length, unsewn on right, and I'm using a snap to hold it shut. I may try your design, possibly mod it slightly. I've enjoyed your videos and it's cool that you're also a watch guy. 👍
So. I’ve thought about making a wallet for some time now and know what I want but not seen the right pattern yet. This is sooooo close. I want two ID windows, four card slots, and a paper money /receipts pocket. Is there a way of utilising your design for this and to make it less bulky? ie no coloured liner. TIA.
@@alandrewgibson I know! I'm in the UK too. There are a lot of products on their site I like the look of, but would have to think long and hard before ordering 😅
Nice, but wait until your customer gives it the load test. I made a tri-fold and the customer complained. When I asked him to stop by so I could take a look, I swear that thing was almost 3 inches thick with cards and receipts. I had to explain the difference between a wallet and a closet.
I've always wondered if that bothers people, being that the majority of the planet uses the Metric System. I use both so I dont care when watching and following tutorials but I can understand why it would tweek some people out. Edit: I absolutely hate it when they try to use both. One or the other people.
11:52 / 12:03 ...there is professiolism .52 mark is not where .03 final hole gonna b .... ( dont get me wrong, i love it) shows that by doing things, you learn, just not watching tutorials....do and learn.
@corterleather how would I sew in a patch to leather without making a large seam? I know it needs to be skived in but I can’t find any videos on how to!
While I do enjoy your videos… “pattern included” is click bait. More accurately “link to purchase pattern included”. I feel duped when I come across titles like that, and feel obligated to 👎
This is great timing. I've purchased several of your patterns and given as gifts. I saw these acrylics yesterday when I was looking for the wet molds. It's great to actually see them in action. I'm new and only started designing my own, these will be a valuable tool.
Perfect timing. I’ve got friends looking for trifolds and I hate traditional bifolds. This is a great design. Well done!
I made this with 4/5 oz and it was almost 3/4 inch thick. I’ll definitely skive my pockets in the future
Those acrylic measure tools are so neat!
Most excellent tri-fold my friend!
I really like this, it's simplicity is the great design, many thanks
ขอบคุณครับ... สำหรับสิ่งดีๆ และคำอธิบายขั้นตอนต่างๆ🙏 Thank you.
That's sweet. I tried a trifold, couldn't get it to sit nice and flat like yours, love this design.
Lol aging yourself with the blockbuster card. Great video, you’re a masterful teacher.
My hero! Been looking for a good trifold pattern :O
I wonder if you could put some snaps on this, so you could take out the card holder part and just carry that when the situation calls for it, or place in another configuration of the card pocket if you needed more/less slots.
You are a genius!!! That will be my next project. Maybe I'll make a video
Very, very nice. I really like that design.
those irons😍
I’m new to leather work and have been struggling to make a solid pattern for a badge (law enforcement, fire, EMS, etc) wallet that can hold bills and few cards (6-8). Trying to keep the thickness down has been difficult as well. I’d love to see you make one or just provide some advice if possible! Your videos have taught me so much and gave me the confidence to start leather working. Thank you!
I LOVE IT. TRULY AMAZING WORK. THANKS FOR SHARING. 👏🏼👏🏼
Great design! Love the variety/options built in to it!
You always make it look SO easy! This is BEAUTIFUL!
Great design. I've recently been playing around with a trifold concept (currently carrying a first attempt) and I think you nailed it. Money compartment in mine runs full length, unsewn on right, and I'm using a snap to hold it shut. I may try your design, possibly mod it slightly. I've enjoyed your videos and it's cool that you're also a watch guy. 👍
Классная работа. И модель прикольная. Мне понравилось.
just bot the pattern and cant wait to make it! i really like you can manipulate the pattern into other patterns
really nice... tyfs
Beautiful great 👍🏻👍🏻😍
Nice job 👍👍👍👍👏👏👏👏👏👏
Awesome wallet, awesome channel. are you able to give me this pattern? Im young and dont have a bank card, thank you.
I have always found the idea of the tri-fold daunting because of the potential bulk. Love this though will give it a go for sure.
Can i ask you what size of thread and punch space you used?
I've never even made a trifold because I view them as kind of a horror show. However, I love this one! Thank you so much for creating it!
What about tri fold with snaps and chain?
How do you go about finishing the edges on the South Street leathers? Same as you do Vegtan or approach it differently?
where did you get the black cutting board that you talked about near the 12:50? thank you so much!
Can you help me, where can I buy the glue you use?
Do you use a reducer or thinner for your Welwood Cement?
What’s the weight of leather?
Do you use Barge? And if so, do you add a thinner to it? Yours doesn’t seem thick, if that makes any sense,
Can you please make a pattern for a male backpack
So. I’ve thought about making a wallet for some time now and know what I want but not seen the right pattern yet. This is sooooo close. I want two ID windows, four card slots, and a paper money /receipts pocket. Is there a way of utilising your design for this and to make it less bulky? ie no coloured liner. TIA.
Ps. It doesn’t have to be Tri fold, or does it. OR do you already have a pattern that would work. Thanks again
Nice work which pricking iron did you use as it doesn’t look like an Osborne?
They are doing a collab with Buckle Guy to release their own line later jn the year
@@chemclimber ah that makes sense good moves just a shame I am in the U.K.
@@alandrewgibson I know! I'm in the UK too. There are a lot of products on their site I like the look of, but would have to think long and hard before ordering 😅
@@chemclimber yes we get hit all the time importing stuff from abroad especially the USA with tax and import duties - it ai at fair!
Hi bro wallet & parse catalock er vido
What weight leather was used for this project?
Two layers of 3oz
Hi. where can i buy a scraper file for the leather.🙏
Tandy.
They call it a detailed leather rougher I think.
Nice, but wait until your customer gives it the load test. I made a tri-fold and the customer complained. When I asked him to stop by so I could take a look, I swear that thing was almost 3 inches thick with cards and receipts. I had to explain the difference between a wallet and a closet.
Can you use international centimeters and mm plz. Noone gets those measurements you use.
I've always wondered if that bothers people, being that the majority of the planet uses the Metric System. I use both so I dont care when watching and following tutorials but I can understand why it would tweek some people out.
Edit: I absolutely hate it when they try to use both. One or the other people.
you should try to make a fish leather wallet that would be cool
11:52 / 12:03 ...there is professiolism .52 mark is not where .03 final hole gonna b .... ( dont get me wrong, i love it) shows that by doing things, you learn, just not watching tutorials....do and learn.
Is that a willard on your wrist?!
👍👍👍👍👍👍👍👍
@corterleather how would I sew in a patch to leather without making a large seam? I know it needs to be skived in but I can’t find any videos on how to!
كم أنا معجب بك اول تعليق
While I do enjoy your videos… “pattern included” is click bait. More accurately “link to purchase pattern included”. I feel duped when I come across titles like that, and feel obligated to 👎
Great point
After ive seen him cutting ✂️ fracking not aligned cuts, and pretending that its okay. Idk how he still is not a bancrupt.
Well yeah, he did that part of the job for you. Smh, everyone wants something for free.
Well if its free it would say free pattern
@@SingTodayiyou know the pieces he sells that aren’t custom are die cut. And i hope the custom stuff he takes extra care with