Discouraging that you had an issue with your new wheel. Glad your not to hurt. Good thing your not a big bicycle rider or your butt would hurt more. 🤷♂️ Butt on a serious note thank you for all you do for this community, your literally putting your body on the line testing out these devices. So Thank you. ✨✅✨You’re Awesome!
12:09 V11 and S18 brought us smoothness in exchange for performance, and not everyone was eager to sacrifice the latter. With the latest Begode we don't have to choose one or another anymore.
oh boy.. Bough V12 after your recommendation and high marks, sold it due to possible failures with mosfets. I'm not a lucky guy with 20k km problem free riding experience. I believe there are those lucky ones that would argue my points below. My main point is that these particular products that are so dependant on quality and reliable electronics should have 0 issues that make rider lose control and crash or have their house on fire when bought new. If they can't achieve that, they should not be selling these products. Why are we paying full price for unfinished product and being the beta testers? These are made to ride in streets among all the traffic at traffic speeds. Imagine if something wrong happens with a car and you get ejected face first to the road. That's what happens with euc's - no passive safety. Something goes wrong with internals - rider plants on the asphalt even at moderate speeds. E-scooters stop working, you just roll to the side of the road and curse your luck. It's completely irresponsible to produce half baked products that can cause serious health issues. They are fucking up the future of EUC's and the only thing that hurts for manufacturers is their sales numbers. Meanwhile we, the beta testers get hooked on hyped reviews, buy beta products and give free of charge feedback in forums. When does this stop? when someone gets killed because of the cutout? Or someones house burns down because of battery fire?
but the shill girls will keep shilling. just look at the begode master how the shills starting hard shilling calling it a "60mph / 100kph wheel" when it struggles above 45 / 75
This tilting back and acceleration happened on my Inmotion v12 HS. This also happened on my friends v11 just the other day. There is an option now in the new app that notices the batteries are not stabilized and it asks to reset them. After that was done, it fixed the issues. It seems to be common among ALL inmotion wheels.
Incredible. I have 1st batch of Begode Tesla T3. 3200 km on the clock and absolutelly 0 problems. V8F is disaster motherboard and motor died on mine. And V12 seems like another disaster I ordered. Dammit I will buy Begode only probably, they do wheels in the simple and working way 😂
By the way, in my first euc year with Inmotion V5f I did around 15000 km, half of it in rain. So ... with these companies you never know. One model is good another one is bad. Or maybe the trend in the last years is from good to bad to worse.
Keep away from Inmotion products. On December 2021 I bought V12 after the Adam's review. On the very first day I got like 2 cut outs from standing still position, but wheel was turning on after that. One month later lights went off and a week or so later bearings have disintegrated after only 220km of ride. The wheel spent a month at the service and when it came back the motor was noisy and some metal grinding was coming out of the wheel. Almost another 3 months in the service and finally motor was replaced, I have my wheel back and it is riding well, but I lost all my confidence in this wheel, it could cut me out anytime, it could again break as the bearings are the cheapest possible, I just hate IM for this wheel. I bought V12 as I was impressed by my previously used V8 and by my V10 - these are really great products, waiting for V12 back from the service I bought used V10F with 10000km on it and it is still running fine (bearings to be replaced soon). But both V11 and V12 HS and HT are disasters. Many issues from the very beginning, and after more than one year they are unable to solve them, that's a shame and I will not forgive them this.
You can have luck or unluck with anything! I bought a new V10F last year. I chose it because it has been on the market for a long time and has proven itself. Or so I thought! After 80 kilometers... BAM... the motherboard died! Inmotion replaced it and now it works fine but who knows how long?! 🤷♂️ EUC's are sketchy and all of them are cheap produced in china. There are no quality or "premium" manufacturers. That's why prefer ESK8's and Scooters, because you have a larger selection of manufacturers and a greater spread of quality.
I have been waiting so long for you to get this wheel! To hear there is a software issue! Noooo. I hope it's all good and updated. And I hope you are ok. I ordered one of these and it's about 5 weeks out. I hope I don't regret this! I've done 1000km so far and no crashes on my inmotion V8. I want to stay crash-less!
You had so much more luck than me. My first wheel is the before nikola +. I’ve had it for a month and I had a stupid crash. Completely my fault. Had to buy a whole new motor and pedal brackets. Stay safe.
Hey Adam, you own me a second beer allready, 2nd order on your cupon :), and yeah finaly myewheel shipped out v12's, hope wont have any problems in future :) thanks for videos!
I do hope they get this sorted out. I cannot think about the wheel just stop working on my trip to the office as I have a very narrow path and one side it bank and the other canal. It would be one way bye bye V12. Super keen to ride a S22 and Master on my local trails to see how it performs. Keep us posted and great unboxing.
Question for you Adam, curious what settings you were using? Pedal sensitivity, split mode settings etc. I have 1400 miles on a v12ht first batch and now waiting on the v12ht which I ordered in March and should arrive soon. Sold the HS and now riding the v11 until the HT comes in. I may also reach out to chooch to see what settings he is using, for now probably safer to keep using v11 until a determination is made. Also everyone I know including me loves yours and mono cats videos. Hope you feel better soon.
The reason I was asking was I wondered if the algorithm in split mode may not have been updated for the high torque motor. But on the other hand if you were not using split mode then that rules that out. Just curious, hope you are healing up well.have a great day and keep up the good work.
Love your vids, easily the most informative and entertaining. I think I’ve watched everyone of them. I’m sure you won’t mind if I say, tires have tread not thread. But embarrassed to admit your english is probably better than mine. 😂😂
This is why I'm definitely going to wait to get the master, I want to give it a year maybe to give begode time to fix any bug/issue that happen with the master. I got the ks 16x 6 months ago and I got that wheel because it had been out for awhile, after seeing issue with so many new wheel I didn't what to have a problem and I haven't. Hope you feel better soon 👍
Have you had any issues with your 16X? I was looking at getting one as my 1st wheel as they seem to be quite reliable and supposedly good for the heavier rider.
@@nickl8247 I've had no problems and it is my first wheel to so I highly recommend this wheel I weigh about 200lbs with gear and I've done rides 35miles with 30% left.
I hurt my hand on the V12 because of either a cut-out or software issue my self 10 days ago! I was riding in 15-20 kmh as recommended by Inmotion them self. I heard a weird and loud sound from either the engine or board (maybe the tier?) and i instantly looked down but by the time i had looked down i was on the ground with intense pain in my arm :/ The wheel still runs and seems okay(?) but i'm not gonna ride it before my hand is recovered and i know the issue is fixed, It happened insanely fast and hurt like hell even in that low speed...
@Frank Spencer Thank you! :) Already spent 1500 NOK (150$ ish) and it will probably be doubled of that soon, no broken bones luckily but now the doctor suspects that i might have torn a tendon in my wrist... I love the V12 but i'm disappointed in Inmotion for sending a faulty device instead of postpone the shipment until they fixed the mosfet and the sketchy firmware!
Did you already get the new control board for the V12? I have a V12 but I don't ride it because of the mosfet issues that inmotion reported. I'm still waiting to receive my new control board which should have the beefier mosfets that can handle the 100.8V power.
@@DeeTofa No i haven't gotten it yet :/ I think its gonna be a long wait because the factory where they produced it in china is closed from covid restrictions i heard don't know how true it is :( But any way hopefully they have already shipped them before the lock down!
If you check ou the v12 forum there's a letter from inmotion saying they have already been shipped and all will be delivered by then end of june. It says July but they said 4-6 weeks from may 10th and the first batch had already been shipped at that point.
An off after 40 - 50Km, riding slowly, smooth path, no rider induced causes. This should not happen, manufacturers should have 100's of kms of testing time attributed to this wheel, before they ever allow it out to customers, or reviewers. They clearly haven't.
This wheel must have some weird curse. Chooch crashed his on the very first ride - but under different circumstances. I rode mine conservatively, for about 400 miles, but decided to stop and get a V11 until the new boards came. The V12 is a really good wheel - but with all the stuff going on, the Master and EX20s could eclipse the V12 before it has its time to shine.
Hey Adam in the next 2days I will be buying my V12, the distributor says they have new HS models with the new driver board. Do you know if the updated HS models have the reinforced rim as well? The reinforced rim might just tip me over to the HT if they didn't update the HS rim.
Thank you for yet another entertaining and informative vid! Sorry to hear you got hurt!… :-( It is definitely frustrating! Want to know what sort of problem could that be this time with V12…
Sorry to hear about the fall. I have had something like that when I got my wheel back from ewheels and it had a BMS issue and cutout with 98% batt going 35kph. My only question is why didn't you show the footage. You said Monica was behind the camera, so that implies you have footage. Is it because you know it will become a meme in the EUC world? LOL
Adam, do you know if the V13 will have suspension? I'm trying to be patient since I like Inmotion quality but the lack of info is making me go back to Begode (maybe the Master). Thanks for your great content! Stay safe buddy!
Thanks for the video. As always. Would you mind making a longer video on power pads for newbies? General Advantages ánd disadvantages of power pads, brands, good ones in different price brackets? Thanks!
I think the Grizzla pads are best right now because they are easiest to space exactly how far apart you want them to sit. Good for jumping. Just remember to use industrial strength velcro if you are a bigger rider.
I’m looking forward to the follow up to this story…It seems very odd..and disappointing!. This is a wheel I really interested in as my second wheel now that I have 1500kms on my starter.
Hi, Adam. Can you please tell anything about charging V12 with 8A charger? I know that V12 supports up to 10A, so 8A should be totally fine, it is just 4A for each battery pack. Have charged it with 8A just 3 times yet, but did not saw any high temps or anything bad. Have seen opinions that max safe charging current for V12 is 6A.
@@igorgoga7985 almost got this wheel, inmotion needs to get their shit together. So many issues with this new batch, terrible quality control. Think I'm just going to stick with my 16X that has never let me down.
@@noelleonard2498 i am thinking getting 16x as a matter of fact, I still have no update on my v12 as it is in the shop- they are trying to troubleshoot it with inmotion using some kind of proprietary soft, aka calibration tools
I have an idea - I made a 16 inch wheel scooter with Yedoo Friday frame and an EUC motor like this would be simply perfect. Now, I suspect these EUC's don't have any fancy wheel motors, all control electronics applied to EUC is on a separate motherboard so I wonder .... what kind of motor are they using and if I could get it as a separate unit to fit it to my scooter :P I'm currently using a Golden Motor, which is nice and robust and has a boatload of torque, but it's slow (30-35 kph). Something close to 50kph would be perfect on a 16 inch wheel, but that would require 600-650 rpm on the motor.
I also had some serious issues with my very first batch of the order in China, the screen won't turn on, and every time I turn on the wheel just lean back itself then the wheel just starts burning like hell, making tons of burning smell, so I sent it back to factory, and they replaced the main board, I have to say with the new board the wheel is totally acting way much better in control, accelerating and braking. I wondered why they didn't make the wheel like this before, and there's definitely problems with the early orders. yes, the weel is ok now, but I lost confidence riding it at max speed, cuz almost all v12 users in China that I know are getting rid of the wheel and changing brand.
V10F can do this if you overpower it. Just say overload get out and hard tiltback come no chance to react. Maybee V12 have this feature or just bad calibration are you calbrated V12ht before crash? You have eucworld conected if crash this rpogram have amazing log files with details about euc.
@@mr_wrongway Glad to hear that the internal log could be uploaded! Hopefully it still includes the time of the crash crash and wasn't overwritten by the ride back home.
So sorry the new wheel went on it's journey without you. I saw your video review of the V12 six months ago & knew that it was the wheel for me! I just bought my V12 last week. When I purchased it, I let the seller know that i wanted an updated board. Seller says No problem. Now when I ask about the board, they keep giving me the run around & saying they tested it before it shipped & to do the spin test & let them know if it fails. WTF is that?!?! Over 1/2 of the cutouts happen on wheels that passed the spin test. I thought that InMotion was going to replace all the sussy Main boards Period! How can I tell (without opening the wheel) if I have the updated board or not? My Main board says that it is Ver 1.5.4 . As the reseller is giving me a hard time should I try to deal directly with InMotion? I have already registered the wheel on their site. I don't really want to send the wheel back. I just want a new board. Any input is greatly appreciated.
WW, i have a serious question for you. My job is at the edge of town and the business is strict about, where i leave my items and i might not be able to keep my Electric Unicycle laying around indoors. At least the business is in a closed space so i could leave it outside, But can 4-8 hours of Unicycle sitting outside cause any harm to the electronics, even though it,s weather proof?
They are not weather proof. Put it inside. I couldn't imagine working for any company that would not accommodate me storing my personal items inside, that takes up about the same amount of space as a backpack. That would be a crazy conversation to me lol
You will homey. Just gotta believe. My first wheel should be coming soon to Canada, early June hopefully. V12HT. Hope I like it. But if I don't, no big deal, just sell it and maybe get a Surron e-bike..(:
Adam, I am glad you are ok, but this new trend of new wheels cutting out unexpectedly is not ok AT ALL. First the Abrams, and now the V12 HT. These are unfinished products that should have never gotten in your hands or the hands of any rider. Where’s the respect? Had these wheels been my first experience with EUCs, not only would I have stopped riding right away, I would actively campaign against anyone riding at all. Unexpected cutout in traffic, or even just a bike trail adjacent to a steep slope or body of water can lead to lethal results. The market will speak for itself…nobody trusts riding these particular wheels and will tank. The initial v12 problems were supposed to be fixed in this v12 HT! This isn’t a three strikes and you’re out situation…it’s a one and done. Done with these wheels and sorry…but these companies too.
Keep seeing video after video of this. We as consumers need to demand better services or at the very least a big price drop if we are going to be their test rats. 3k for a product that leads to a 25k hospital bill is ridiculous
Maybe, just maybe they actually need to test their products before they ship them out to consumers and especially reviewers. Reminds me of Garant Thumb getting the Hi-Point carbine sent to him for a review and catastrophe ensued. Like they know it's going out, but they can't even bother to put some miles in it before they hand it out and expect the reviewer to just brush it off and sell their product anyway.
Czy wiadomo, która opona w HT trafi do sprzedaży? Z tego co widzę na necie są 2 wersje - z pełnym środkiem i dużymi klockami oraz ta z filmu (i wszyscy co ją mają nie mają stópki ;) )
But reviewers should not be test pilots! (Not unique to Inmotion) ...and the eeevee guys ignored Inmotion in their "best manufacturer" award, iirc. It was a real surprise to me as an Inmotion customer.
Manufacturers are not testing there wheels properly. They should have testers out on new wheels for weeks prior to supplying them to anyone. Further they should be using them in extreme controlled environments, putting them through the worst they could reasonably expect a customer to. To glibly say its a firmware problem, is no excuse, what it does confirm is that changes in the firmware should attract the same regime in thorough testing. If firmware changes can fix a problem like this, it makes sense it could cause it as well.
I put a deposit down on this wheel. Now I’m kinda thinking about canceling my order with all these bad things I keep hearing from people who ride these things. I don’t wanna fall and get injured if I’m riding these things conservatively. Might just go with a scooter instead
@@MmmhMarky I want a Surron X, but these unicycles look so damn fun and cool. I hope my V12 HT doesn't cut out on me. It'll be my first wheel. Should be getting it early June hopefully. I want an e-bike and a couple wheels, but funds are limited, so I'm waiting to see how much I will like EUC's to make a decision on my next purchase. If I like the V12HT I'll probably just wait and see what V13 will be. If it looks good with suspension I will probably get it.
@@Skrippykrotangler good luck to you and always wear lots of protection. It is indeed a lot of fun, but danger is everywhere. Avoid any chances of danger to minimize risk. Hsiang tested the v11 and ran over all the manholes he came across until one flipped him over.
@@GoLakers3900 It definitely was a cut out, just what was the reason for it. A sudden stop like that in the wheel for no real reason is a cut out. InMotion has had way too many issues with this.
@@GoLakers3900 Slow down, don't get too into your feelings, RELAX!! By his description of what had happened and I had seen it first in his Instagram story, he was going at a very low speed and all of a sudden, the wheel tilted and stopped and he flew for no reason. That there indicates a Cut Out or what we would call a Cut Out in the EUC community!
@@curtflirt2 You want me to relax when you're the one going 100 MPH with your comments? Don't be clown. Again, you not there. Adam there. Adam said no cutout. Software perhaps. Grunt.
Global testing and certification? If we compare wheels to airplanes, then we can expect costs to increase by 5 to 50 times. The amount of bureaucratic control is unfathomable to anyone not already immersed in that quagmire. Spare parts like a simple bolt that would cost about a dollar at the hardware store would cost maybe 37 dollars but it would come with complete chain of custody documentation and quality control test results. A very nice result, but more of a millionaires toy.
People would not buy them at that price, that would only be large companies that could afford that. Not saying that bureaucracy won't mess it up, but the price is not one of them. I fear that regulations will eventually force riders to ride on normal roads, or severely limit its speed, and then you might as well not have them anymore.
Discouraging that you had an issue with your new wheel. Glad your not to hurt. Good thing your not a big bicycle rider or your butt would hurt more. 🤷♂️ Butt on a serious note thank you for all you do for this community, your literally putting your body on the line testing out these devices. So Thank you. ✨✅✨You’re Awesome!
The wheels is arriving in a week, so it doesn't look like for testing.
Glad that you didn't get too hurt and I wish you a speedy recovery!
12:09 V11 and S18 brought us smoothness in exchange for performance, and not everyone was eager to sacrifice the latter. With the latest Begode we don't have to choose one or another anymore.
For how much?
Was it a cut out?! No because he fell the Wrooong Way! Sorry to hear you fell. Wishing you a fast recovery
It'll be interesting to hear the follow up - why the wheel left you behind.
Can't wait for the HT & HS comparison!!
It's a good looking wheel IMO!
Nice screen and the orange rim fits perfectly. Hopefully Inmotion can and will fix the issues.
oh boy.. Bough V12 after your recommendation and high marks, sold it due to possible failures with mosfets. I'm not a lucky guy with 20k km problem free riding experience. I believe there are those lucky ones that would argue my points below. My main point is that these particular products that are so dependant on quality and reliable electronics should have 0 issues that make rider lose control and crash or have their house on fire when bought new. If they can't achieve that, they should not be selling these products.
Why are we paying full price for unfinished product and being the beta testers? These are made to ride in streets among all the traffic at traffic speeds. Imagine if something wrong happens with a car and you get ejected face first to the road. That's what happens with euc's - no passive safety. Something goes wrong with internals - rider plants on the asphalt even at moderate speeds. E-scooters stop working, you just roll to the side of the road and curse your luck.
It's completely irresponsible to produce half baked products that can cause serious health issues. They are fucking up the future of EUC's and the only thing that hurts for manufacturers is their sales numbers. Meanwhile we, the beta testers get hooked on hyped reviews, buy beta products and give free of charge feedback in forums.
When does this stop? when someone gets killed because of the cutout? Or someones house burns down because of battery fire?
Apparently the latest batch of V11 are fire wheels now. Two confirmed cases and probably more. Inmotion already send apology letters out.
Say it louder for the companies in the back
but the shill girls will keep shilling. just look at the begode master how the shills starting hard shilling calling it a "60mph / 100kph wheel" when it struggles above 45 / 75
Absolutely. At least Adam is honest about these issues and hammer down on it unlike the others
They are made in China, so no accountability.
This tilting back and acceleration happened on my Inmotion v12 HS. This also happened on my friends v11 just the other day. There is an option now in the new app that notices the batteries are not stabilized and it asks to reset them. After that was done, it fixed the issues. It seems to be common among ALL inmotion wheels.
Incredible. I have 1st batch of Begode Tesla T3. 3200 km on the clock and absolutelly 0 problems. V8F is disaster motherboard and motor died on mine. And V12 seems like another disaster I ordered. Dammit I will buy Begode only probably, they do wheels in the simple and working way 😂
Hopefully they do something waterproof with reliable batteries.
By the way, in my first euc year with Inmotion V5f I did around 15000 km, half of it in rain. So ... with these companies you never know. One model is good another one is bad. Or maybe the trend in the last years is from good to bad to worse.
Keep away from Inmotion products. On December 2021 I bought V12 after the Adam's review. On the very first day I got like 2 cut outs from standing still position, but wheel was turning on after that. One month later lights went off and a week or so later bearings have disintegrated after only 220km of ride. The wheel spent a month at the service and when it came back the motor was noisy and some metal grinding was coming out of the wheel. Almost another 3 months in the service and finally motor was replaced, I have my wheel back and it is riding well, but I lost all my confidence in this wheel, it could cut me out anytime, it could again break as the bearings are the cheapest possible, I just hate IM for this wheel.
I bought V12 as I was impressed by my previously used V8 and by my V10 - these are really great products, waiting for V12 back from the service I bought used V10F with 10000km on it and it is still running fine (bearings to be replaced soon).
But both V11 and V12 HS and HT are disasters. Many issues from the very beginning, and after more than one year they are unable to solve them, that's a shame and I will not forgive them this.
You can have luck or unluck with anything! I bought a new V10F last year. I chose it because it has been on the market for a long time and has proven itself. Or so I thought! After 80 kilometers... BAM... the motherboard died! Inmotion replaced it and now it works fine but who knows how long?! 🤷♂️
EUC's are sketchy and all of them are cheap produced in china. There are no quality or "premium" manufacturers. That's why prefer ESK8's and Scooters, because you have a larger selection of manufacturers and a greater spread of quality.
@@Scheltokeeper This lottery is becoming too expensive nowadays.
I have been waiting so long for you to get this wheel! To hear there is a software issue! Noooo. I hope it's all good and updated. And I hope you are ok. I ordered one of these and it's about 5 weeks out. I hope I don't regret this! I've done 1000km so far and no crashes on my inmotion V8. I want to stay crash-less!
You had so much more luck than me. My first wheel is the before nikola +. I’ve had it for a month and I had a stupid crash. Completely my fault. Had to buy a whole new motor and pedal brackets. Stay safe.
Hey Adam, you own me a second beer allready, 2nd order on your cupon :), and yeah finaly myewheel shipped out v12's, hope wont have any problems in future :) thanks for videos!
Okay tell me where to send beer! wrongwayadam@gmail.com
I do hope they get this sorted out. I cannot think about the wheel just stop working on my trip to the office as I have a very narrow path and one side it bank and the other canal. It would be one way bye bye V12. Super keen to ride a S22 and Master on my local trails to see how it performs. Keep us posted and great unboxing.
Question for you Adam, curious what settings you were using? Pedal sensitivity, split mode settings etc. I have 1400 miles on a v12ht first batch and now waiting on the v12ht which I ordered in March and should arrive soon. Sold the HS and now riding the v11 until the HT comes in. I may also reach out to chooch to see what settings he is using, for now probably safer to keep using v11 until a determination is made. Also everyone I know including me loves yours and mono cats videos. Hope you feel better soon.
Hey I had 100% pedal sensitivity, off road mode. Thanks for loving videos! Thanks for watching
The reason I was asking was I wondered if the algorithm in split mode may not have been updated for the high torque motor. But on the other hand if you were not using split mode then that rules that out. Just curious, hope you are healing up well.have a great day and keep up the good work.
Finally and it seems like a trend chooch had a crash on first day as well. But different issue. See I want v12 so bad but seems gotta wait some more
Dude your a test pilot, be safe
I had the same problem with the first v10! No cut off but the padels had there own live and throgh me of the wheel!
Ty for video, nice to hear nothing serious did happen to you. Better to hurt the bum than the nogging!
Love your vids, easily the most informative and entertaining. I think I’ve watched everyone of them. I’m sure you won’t mind if I say, tires have tread not thread. But embarrassed to admit your english is probably better than mine. 😂😂
Thanks! I always mix thread tread up! Got you ;)
This is why I'm definitely going to wait to get the master, I want to give it a year maybe to give begode time to fix any bug/issue that happen with the master.
I got the ks 16x 6 months ago and I got that wheel because it had been out for awhile, after seeing issue with so many new wheel I didn't what to have a problem and I haven't.
Hope you feel better soon 👍
Have you had any issues with your 16X? I was looking at getting one as my 1st wheel as they seem to be quite reliable and supposedly good for the heavier rider.
@@nickl8247 I've had no problems and it is my first wheel to so I highly recommend this wheel I weigh about 200lbs with gear and I've done rides 35miles with 30% left.
@@randomzakk5269 thanks for your thoughts, much appreciated.
My 16X has been solid for the whole year I've had it. It's a good wheel
I hurt my hand on the V12 because of either a cut-out or software issue my self 10 days ago! I was riding in 15-20 kmh as recommended by Inmotion them self. I heard a weird and loud sound from either the engine or board (maybe the tier?) and i instantly looked down but by the time i had looked down i was on the ground with intense pain in my arm :/ The wheel still runs and seems okay(?) but i'm not gonna ride it before my hand is recovered and i know the issue is fixed, It happened insanely fast and hurt like hell even in that low speed...
id demand a refund for this dysfunctional garbage
@Frank Spencer Thank you! :) Already spent 1500 NOK (150$ ish) and it will probably be doubled of that soon, no broken bones luckily but now the doctor suspects that i might have torn a tendon in my wrist... I love the V12 but i'm disappointed in Inmotion for sending a faulty device instead of postpone the shipment until they fixed the mosfet and the sketchy firmware!
Did you already get the new control board for the V12?
I have a V12 but I don't ride it because of the mosfet issues that inmotion reported. I'm still waiting to receive my new control board which should have the beefier mosfets that can handle the 100.8V power.
@@DeeTofa No i haven't gotten it yet :/ I think its gonna be a long wait because the factory where they produced it in china is closed from covid restrictions i heard don't know how true it is :( But any way hopefully they have already shipped them before the lock down!
If you check ou the v12 forum there's a letter from inmotion saying they have already been shipped and all will be delivered by then end of june. It says July but they said 4-6 weeks from may 10th and the first batch had already been shipped at that point.
An off after 40 - 50Km, riding slowly, smooth path, no rider induced causes. This should not happen, manufacturers should have 100's of kms of testing time attributed to this wheel, before they ever allow it out to customers, or reviewers. They clearly haven't.
This wheel must have some weird curse. Chooch crashed his on the very first ride - but under different circumstances. I rode mine conservatively, for about 400 miles, but decided to stop and get a V11 until the new boards came. The V12 is a really good wheel - but with all the stuff going on, the Master and EX20s could eclipse the V12 before it has its time to shine.
I can't wait to see your riding experience on this particular wheel. I am 110kg heavy, should I only look at the big ht wheels, maybe?
Today I will release a video on it! Stay tuned :)
Wiadomo kiedy dostaniesz nowe V12HT? Bardzo mi się podoba ale Twój przypadek odstrasza od zakupu.
Hope you heal quickly. Do you ever miss your monster pro? I still love mine.
Thanks! I guess sometimes. But now with the EX20S not so much anymore
Hey Adam in the next 2days I will be buying my V12, the distributor says they have new HS models with the new driver board. Do you know if the updated HS models have the reinforced rim as well? The reinforced rim might just tip me over to the HT if they didn't update the HS rim.
Thank you for yet another entertaining and informative vid! Sorry to hear you got hurt!… :-(
It is definitely frustrating! Want to know what sort of problem could that be this time with V12…
My V12 should be coming 28th this month ..what you recommend for pads? Im looking at grizzlies but im not sure I’m a Newby btw so any advice? Thanks
Sorry to hear about the fall. I have had something like that when I got my wheel back from ewheels and it had a BMS issue and cutout with 98% batt going 35kph. My only question is why didn't you show the footage. You said Monica was behind the camera, so that implies you have footage. Is it because you know it will become a meme in the EUC world? LOL
Monocat, not Monica 😅
She witnessed what happened from the back, she wasn't recording. That's what he said.
@@BitWolf "As Kate was behind the camera saw it." That's all he said. ruclips.net/video/BUvzCLUqpmI/видео.html
@@BitWolf Stupid auto correct 😝. Ah, that makes sense.
Adam, do you know if the V13 will have suspension?
I'm trying to be patient since I like Inmotion quality but the lack of info is making me go back to Begode (maybe the Master).
Thanks for your great content!
Stay safe buddy!
But V13 suspensions are arleady confirmed by Inmotion itself !
Great thumbnail ;)
Thank you sir !!!
Thanks for the video. As always. Would you mind making a longer video on power pads for newbies? General Advantages ánd disadvantages of power pads, brands, good ones in different price brackets? Thanks!
I think the Grizzla pads are best right now because they are easiest to space exactly how far apart you want them to sit. Good for jumping. Just remember to use industrial strength velcro if you are a bigger rider.
I’m looking forward to the follow up to this story…It seems very odd..and disappointing!. This is a wheel I really interested in as my second wheel now that I have 1500kms on my starter.
Hi, Adam. Can you please tell anything about charging V12 with 8A charger? I know that V12 supports up to 10A, so 8A should be totally fine, it is just 4A for each battery pack. Have charged it with 8A just 3 times yet, but did not saw any high temps or anything bad. Have seen opinions that max safe charging current for V12 is 6A.
How can I buy that 'Tiltback to the Future' shirt. It's the best!!! 😂
Love your videos Man! Wrong Way! All the way!
New hs v12 board- today tilt back and the audio message “overcharge pls dismount”. I was stranded
Installed new board by yourself, or by a seller?
@@noelleonard2498 by a dealer eevee's
@@igorgoga7985 almost got this wheel, inmotion needs to get their shit together. So many issues with this new batch, terrible quality control. Think I'm just going to stick with my 16X that has never let me down.
@@noelleonard2498 i am thinking getting 16x as a matter of fact, I still have no update on my v12 as it is in the shop- they are trying to troubleshoot it with inmotion using some kind of proprietary soft, aka calibration tools
I have an idea - I made a 16 inch wheel scooter with Yedoo Friday frame and an EUC motor like this would be simply perfect.
Now, I suspect these EUC's don't have any fancy wheel motors, all control electronics applied to EUC is on a separate motherboard so I wonder .... what kind of motor are they using and if I could get it as a separate unit to fit it to my scooter :P
I'm currently using a Golden Motor, which is nice and robust and has a boatload of torque, but it's slow (30-35 kph). Something close to 50kph would be perfect on a 16 inch wheel, but that would require 600-650 rpm on the motor.
Trials tire seem like a good type of tread.
Thanks for sharing
I was debating between the V12 HT and RS19 HT for my first wheel, now not so sure
I like electric unicycle, it’s very fun to ride, he he.
Update on this HT wheel would be ace!! 👌
Coming today
I also had some serious issues with my very first batch of the order in China, the screen won't turn on, and every time I turn on the wheel just lean back itself then the wheel just starts burning like hell, making tons of burning smell, so I sent it back to factory, and they replaced the main board, I have to say with the new board the wheel is totally acting way much better in control, accelerating and braking. I wondered why they didn't make the wheel like this before, and there's definitely problems with the early orders. yes, the weel is ok now, but I lost confidence riding it at max speed, cuz almost all v12 users in China that I know are getting rid of the wheel and changing brand.
curious, how do you get the wheel to do the free spin thing and then make it stop?
V10F can do this if you overpower it. Just say overload get out and hard tiltback come no chance to react.
Maybee V12 have this feature or just bad calibration are you calbrated V12ht before crash?
You have eucworld conected if crash this rpogram have amazing log files with details about euc.
I didn’t calibrate it…I uploaded the log files via inMotion app and sent them. I’m in touch :)
@@mr_wrongway Glad to hear that the internal log could be uploaded! Hopefully it still includes the time of the crash crash and wasn't overwritten by the ride back home.
So sorry the new wheel went on it's journey without you. I saw your video review of the V12 six months ago & knew that it was the wheel for me! I just bought my V12 last week. When I purchased it, I let the seller know that i wanted an updated board. Seller says No problem. Now when I ask about the board, they keep giving me the run around & saying they tested it before it shipped & to do the spin test & let them know if it fails. WTF is that?!?! Over 1/2 of the cutouts happen on wheels that passed the spin test. I thought that InMotion was going to replace all the sussy Main boards Period! How can I tell (without opening the wheel) if I have the updated board or not? My Main board says that it is Ver 1.5.4 . As the reseller is giving me a hard time should I try to deal directly with InMotion? I have already registered the wheel on their site. I don't really want to send the wheel back. I just want a new board. Any input is greatly appreciated.
Say the name of the seller so we don’t buy from this crook.
Kinda like the Abrams crash. I hope Inmotion is faster at finding a solution than LeaperKim, because we're still waiting for one.
It was different. Abrams was a Hal sensor - software problem. They put out an update for that today :)
WW, i have a serious question for you. My job is at the edge of town and the business is strict about, where i leave my items and i might not be able to keep my Electric Unicycle laying around indoors. At least the business is in a closed space so i could leave it outside, But can 4-8 hours of Unicycle sitting outside cause any harm to the electronics, even though it,s weather proof?
They are not weather proof. Put it inside.
I couldn't imagine working for any company that would not accommodate me storing my personal items inside, that takes up about the same amount of space as a backpack. That would be a crazy conversation to me lol
Is the rear light stronger as the previous model?
What's better, the new version, not the old one, the better battery, the good speed.
All those beauties in the back and of course Kate.
Wish I could call any of those wheels my own.
You will homey. Just gotta believe. My first wheel should be coming soon to Canada, early June hopefully. V12HT. Hope I like it. But if I don't, no big deal, just sell it and maybe get a Surron e-bike..(:
Very discouraging that quality control isn’t keeping pace with the increase in power and capability of these wheels.
Adam, I am glad you are ok, but this new trend of new wheels cutting out unexpectedly is not ok AT ALL. First the Abrams, and now the V12 HT. These are unfinished products that should have never gotten in your hands or the hands of any rider. Where’s the respect? Had these wheels been my first experience with EUCs, not only would I have stopped riding right away, I would actively campaign against anyone riding at all. Unexpected cutout in traffic, or even just a bike trail adjacent to a steep slope or body of water can lead to lethal results. The market will speak for itself…nobody trusts riding these particular wheels and will tank. The initial v12 problems were supposed to be fixed in this v12 HT! This isn’t a three strikes and you’re out situation…it’s a one and done. Done with these wheels and sorry…but these companies too.
Inmotion gave you the V12 HT to be the crash test dummy. Nothing’s ever free.
Keep seeing video after video of this. We as consumers need to demand better services or at the very least a big price drop if we are going to be their test rats. 3k for a product that leads to a 25k hospital bill is ridiculous
Maybe, just maybe they actually need to test their products before they ship them out to consumers and especially reviewers. Reminds me of Garant Thumb getting the Hi-Point carbine sent to him for a review and catastrophe ensued. Like they know it's going out, but they can't even bother to put some miles in it before they hand it out and expect the reviewer to just brush it off and sell their product anyway.
CAN ANYONE TELL ME, will there be an newer version of the v12 High speed this coming JUNE?
The opinion I trust is one who turns down free stuff for promotion
Czy wiadomo, która opona w HT trafi do sprzedaży? Z tego co widzę na necie są 2 wersje - z pełnym środkiem i dużymi klockami oraz ta z filmu (i wszyscy co ją mają nie mają stópki ;) )
Nie wiem jesscze :/
Day 3 of asking to do a comparison with the EX20S and the Master. Maybe a partial review
I’ll look into it :) I was thinking about it this morning :)
Fresh haircut?😁
But reviewers should not be test pilots! (Not unique to Inmotion) ...and the eeevee guys ignored Inmotion in their "best manufacturer" award, iirc. It was a real surprise to me as an Inmotion customer.
Innotion has a high failure rate.
I was told the same by ewheels.
My v11 had a board failure.
Manufacturers are not testing there wheels properly. They should have testers out on new wheels for weeks prior to supplying them to anyone. Further they should be using them in extreme controlled environments, putting them through the worst they could reasonably expect a customer to. To glibly say its a firmware problem, is no excuse, what it does confirm is that changes in the firmware should attract the same regime in thorough testing. If firmware changes can fix a problem like this, it makes sense it could cause it as well.
You don't have the footage where you crashed?
Sadly no
So sad to hear so many issue with inmotion product.
grip tape in 2022? Spiked pedals and power pads is a safety feature when we talk about wheels that can go over 50kph
I put a deposit down on this wheel. Now I’m kinda thinking about canceling my order with all these bad things I keep hearing from people who ride these things. I don’t wanna fall and get injured if I’m riding these things conservatively. Might just go with a scooter instead
I am with you. I ordered powerpads for the v12, but I am looking at e-scooter and e-bike now.
"Two wheels is better than one."
@@MmmhMarky I want a Surron X, but these unicycles look so damn fun and cool. I hope my V12 HT doesn't cut out on me. It'll be my first wheel. Should be getting it early June hopefully. I want an e-bike and a couple wheels, but funds are limited, so I'm waiting to see how much I will like EUC's to make a decision on my next purchase. If I like the V12HT I'll probably just wait and see what V13 will be. If it looks good with suspension I will probably get it.
@@Skrippykrotangler good luck to you and always wear lots of protection. It is indeed a lot of fun, but danger is everywhere. Avoid any chances of danger to minimize risk. Hsiang tested the v11 and ran over all the manholes he came across until one flipped him over.
I'll take an Euc fire over a cut out or glitch any day.
So the possibility of death over falling down LOL
I am TELLING YOU, I am Soo disappointed to hear about this cutout with this wheel. Had the money coming to buy this at the end of the month.
It wasn't a cutout
@@GoLakers3900 It definitely was a cut out, just what was the reason for it. A sudden stop like that in the wheel for no real reason is a cut out. InMotion has had way too many issues with this.
@@curtflirt2 You weren't there, Adam was and he stated it wasn't a cutout.
@@GoLakers3900 Slow down, don't get too into your feelings, RELAX!! By his description of what had happened and I had seen it first in his Instagram story, he was going at a very low speed and all of a sudden, the wheel tilted and stopped and he flew for no reason. That there indicates a Cut Out or what we would call a Cut Out in the EUC community!
@@curtflirt2 You want me to relax when you're the one going 100 MPH with your comments? Don't be clown.
Again, you not there. Adam there. Adam said no cutout. Software perhaps. Grunt.
This is disheartening. What is Inmotion doing...I just had a cutout on my brand new V11. Waiting on a new board currently.
Adam, how is begode master meanwhile riding? I think more people looking for updates about that wheel...
Global testing and certification? If we compare wheels to airplanes, then we can expect costs to increase by 5 to 50 times. The amount of bureaucratic control is unfathomable to anyone not already immersed in that quagmire. Spare parts like a simple bolt that would cost about a dollar at the hardware store would cost maybe 37 dollars but it would come with complete chain of custody documentation and quality control test results. A very nice result, but more of a millionaires toy.
People would not buy them at that price, that would only be large companies that could afford that. Not saying that bureaucracy won't mess it up, but the price is not one of them. I fear that regulations will eventually force riders to ride on normal roads, or severely limit its speed, and then you might as well not have them anymore.
Colors are similar to the latest Volcano Hybrid vaporizer. I like it! 🌱😁
And just as much plastic that you are inhaling.
Plus joli coiffure..
I need ten thousand of you guys to get these guns and ammo off my books and *RIGHT NOW!*
You got what you asked for 🤣
man what an ugly wheel
you think so? I think it's the sexiest looking wheel, followed by the Master and the RS19.
this thing got that flash gordon shape man like an old mail box or something i dont know 😀
@@Skrippykrotangler So, that means you want to make sex with this wheel? Watch out for cut out.