SPYDERCO SHAMAN AWT SCALE INSTALLATION!!!!!! (APPLIED WEAPONS TECHNOLOGIES) THESE SCALES ARE SICK!!!
HTML-код
- Опубликовано: 9 фев 2025
- LINK TO THE AWT SCALES:
appliedweapons...
LINK TO THE POCKET CLIP:
www.lynchnw.co...
link to shaman:
amzn.to/3IhAqSU
Spyderco Shaman Signature Knife with 3.58" CPM S30V Black Steel Blade and Black Matte-Finished G-10 Handle - PlainEdge - C229GPBK
TOOLS AND MATERIALS I USE:
Wiha T6 Screwdriver - amzn.to/48zwNSI
Wiha Stubby - amzn.to/3wwgyJ5
Work Sharp Precision Adjust Elite - Adjustable Knife Sharpening System - For Hunting, Serrated & Kitchen Knives - amzn.to/3Ie88sn
Work Sharp Guided Field Sharpener, Compact Travel - amzn.to/49tnPrr
WORKPRO 24-in-1 Precision Screwdriver, Pen Style Multi-Bit Screwdriver - amzn.to/3UV8rzE
Knife Pivot Lube Original Oil for Blades - amzn.to/42SUAfp
KPL KNIFE SHIELD - Corrosion Preventive Knife Cleaner Food Safe Protectant for Preventing Rust and Degreaser Oil Polisher skin-friendly Water Based Cleanser - amzn.to/3wBUs84
Super Lube (big bottle)- amzn.to/3TfbEZI
Super Lube (small needle tip applicator) - amzn.to/48sWLHG
Disposable Micro Applicators Brush - amzn.to/42VbJox
CPB Silicone Soldering Repair Mat, Heat Resistant Work Mat - amzn.to/3UYvycU
Dahle Vantage 10690 Self-Healing Cutting Mat, 9"x12", 1/2" Grid, 5 Layers for Max Healing - amzn.to/3T3dGem
Liquid Loctite Blue 242 - amzn.to/3IgeO9j
LOCTITE 248 Blue Thread locker Glue Stick - amzn.to/49xa1Mz
If you would like to donate to the channel it would be much appreciated. spot.fund/dcz86sc
Like, comment, subscribe, and hit the notification bell now and never miss a slice of the action!!
(All links above are Amazon Affiliate links)
Nice to show this, helps see how to take it apart.
I'm glad, thanks for watching!!
Should have got new washers. Nice end result 👍🏻
I should have. But I was dying to get this knife put together. It still feels great, and I don't feel anything from the dinged up washer. Thank you!
Awesome video! Had AWT scales installed on 3 of my exclusive Shaman's, they are great mods. Thanks for sharing! 👍
Haha thanks!! This was my first time doing shaman scales. I'm sure you were like, wow, this guy is such an amateur, 😆 😂 I gave it my best shot, though lol.
@@KnifeFanatic, no worries brother, I'm a amatuer myself. Those bronze scales are nice! I just swapped out the scales on my Crucarta PM 2 for AWT scales also. I didn't care much for the micarta. You'll enjoy your new mod. Cheers! 👍
I always put the D shaped pivot side all together first. Seems easier. My 3 cents 🙋♂️
Ya Haha you're right, thanks for the tip lol
Hey Knife Fanatic, coming over based on bladesandedc recommendation. Cool to find a new channel doing good work and putting some value into the community. Cheers man!
that tip looked uneven, as spydercos oft do. I have a new Shaman coming in SPY27, and have the Cast Iron Type III coming from AWT. I will be referring to this if I run into any snags
Just did a Manix 2 upgrade with AWT scales, Flytanium Ball Cage, Ceramic Ball and Lynch NW Pocket Clip.
Awesome!! How do you like the manix 2 now?
BladesAndEDC sent me over, always looking for good knife content. Thanks for the look see and keep making sharp things fun and enjoyable
Hanging with bladesandedc great content bud, thanks.
Everyone always assembles these backwards and wonders why they have a hard time. YOU ALWAYS PUT THE CLIP SIDE TOGETHER FIRST WITH THE D SHAPE!!
Ya I definitely learned the hard way haha... thanks
Great scale swap tutorial. Those scales are sweet
Thank you!!
Love your channel
Fantastic!!!
The bladesandedc wave is coming your way. Keep up the good work !
Sweet mod bladesandedc send love
Thanks brother!
great vid, I just put the black skinnies on mine, already loved it but its so much better now!
That's great to hear!!!
Just bought a shaman from bladehq cuz the deal was great. It was bc of this video that I did bc I want AWT skinny scales for it! Thanks!
That's awesome to hear man!! AWT scales are amazing!!
Great video!!!
Lol thanks brotha!!! I realized that there were a lot of things I could have done different/better like halfway through the video, but I didn't want to start all over. I'm sure you could do a better video if you don't already have one for Shaman Scales install, which I don't think I've seen from you. Thanks for the support, though, Blades! 🙏🏽 😆
@@KnifeFanatic Have you watched my Manix 2 and Para 3 LW AWT install videos? I screwed them all up. I think people appreciate the honesty of showing exactly how it went and not editing or re-recording the video.
@bladesandedc not the para 3 lw but the manix 2 ya. And I agree with you on the redoing of the video and being honest. There was a part on this video where I completely fucked it so hard that I absolutely had to redo lol. And just minor cutting out some useless stuff to shave down the length of the video. Otherwise, it would have been like over 40 min, and nobody wants to watch all that, lol. 32 min is already long enough.
Bladesandedc sent me. Great job on your scale installation!
Nice job,got a set of awt on my manix and some for my pm3 on the way. bladesandedc , thanks
BladesAndEDC sent me 🤘😁🤘
BladesAndEDC sent me over !
Bladesandedc sent me over. That clip looks awesome!
BladesAndEDC made me do it!
Watch the videos and you will be greatful i did!
I love AWT scales! Great video man. Jamie from bladesandedc sending you some subs.
bladesandedc sent me again! Keep up the great content!!🎉
Also did the stand-off mod on one of my M4 shamans. Looks good and is definitely lighter.
Nice! I'm sure it looks and feels great!
Sweet mod BLADESANDEDC SENT ME ✌️
Subscribed! BladesAndEDC sent me over! Looking forward to checking out your content!
BladesAndEDC sent me
Have you had any issues with your pivot screw interfacing with the scales? Does it hold tight or do you have to “tune” the pivot? My PM2 constantly loosens.. i am tempted to blu loctite the screw. Curious about aluminum
I haven't carried my shaman or pm2 in a long while due to the daily rotation of my EDC so I can't really give you an accurate answer. But if you are having problems with the pivot loosening then it wouldn't be a bad idea to add a little bit of blue loctite to the screw. Just make sure you don't add too much that it spreads into the pivot and locks up the action. I personally like to use this loctite in conjuction the micro applicators because it's easier to manipulate and it's not as messy.
amzn.to/4h0Awhj
amzn.to/40LewkR
Nice knife, bladesandedc sent me here tonight
Love the shaman. bladesandedc said whats up
Bladesandedc sent me. Just subscribed
Great job on the content. Keep it up. BladesandEDC
good video glad I’m subscribed. Love me some AWT! Bladesandedc
Bladesandedc sent me
bladesandedc sends his regards!
Bladesandedc
bladesandedc sent
bladesandedc with a great recommendation
Bladesandedc sent me! Interesting tutorial. Looks great!🎉