Thank you! It is a nice tutorial! I use body filler once in a few years and it is nice to refresh my memory before starting a new car project as I plan to do today. Blessings!
It is best to go by the video, there is no real rule of thumb. The cans tell you to put two drops which makes no sense. Just a thin line about a quarter way down of a circle of body filler. You can adjust how heavy of a line based on temperature you are working in.
You could but you wouldn't want to do that. You need it on a flat surface so you can pull it off with a body filler spreader. If it is down in a cup, it wouldn't work.
In the past, the only difference between red blue and white, was just the coloring. Usually this was just a difference in manufacturers. Now they are making the colors to represent speed of hardening. I have not actually tried the color for speed hardeners yet. I usually stick with the blue. I do know this, stay away from Bondo brand filler. They advertise they are the best, but when you go to most body shops, they use Evercoat. Bondo brand packs up the sandpaper and I have seen where later on it shrinks and causes problems. Use what the pros use, Evercoat.
@@tuffy16 Blue works in all body fillers, the same as all the other colors. I just do not use Bondo Brand filler made by 3M because it sucks compared to the others. I just prefer blue just because I am used to the mixed color and knowing when I have just the right amount. But there really isn't any difference in the other colors other than now they are making different colors for different speed in sure times. But it should tell you that on the tubes if you have one of those.
Only if you are reading the back of the crap Bondo Brand can. Professional body shops all use cardboard. Over 40 years of doing this way and NEVER had an issue. So I think I have proved it works just fine.
Been doing it just like this video for over 40 years, never, not one time has it had issues. So it works and if you know it all, then why are you watching this video? You can stir it as long as you are not whipping it.
I used your method and the filler turned to cottage cheese too fast and it became unusable. I cut down the amount by half of what you showed and was able to use that amount without it turning to cottage cheese.
My method is 40 plus years solid, however, I do mention in the video and it is highly important to change the amount of hardener based on the surrounding temperatures and humidity. If you are mixing filler in like temps in the 90's, you will want to use less. Plus, this will also be affected by brands of body filler you are using. I always suggest if you do not know your body filler, as in never used it before. Mix you up some and test it out before actually doing the body work job on the car you are planning on painting. I will say, I have never seen body filler turn into cottage cheese type texture. Usually if it is too much hardener, it just hardens before you can spread it. Glad you got it figured out and make it work for you.
You can use a paint stick, I clearly stated in the video that you do not mix it fast or churn in. Been doing it a long time and never had any air bubbles in my filler. If you know so much, why are you watching these videos?
How do you know you mixed the filler wrong. Did it harden and were you able to sand it? The only two bad situations are, if you didn't get enough hardener in it and it never fully cured. Or if you mix too much hardener in it, the bleach that is in the hardener can cause spots or stain in your paint job down the road. Tell me why you feel it is wrong?
Yes, you can use cardboard, most body shops do because it is quicker and cheaper. You have been reading the back of a Bondo can and they are completely STUPID!!!... I have been doing this for over 40 years and have never had one issue in my filler. Question is, if you know so much about it, then why are you watching the video, or are you a troll?
Got almost 50 years of doing this way that says different. My question is, if you think you already know all about it, why are you watching the video. Just so you can criticize me? You can stir body filer and if you noticed, I pulled the two parts together at first. You just can't stir fast and whip it to cause air bubbles. Don't be getting on here leaving comments that is going to confuse others. My way has worked for almost 50 years, never had an issue. I get comments like this from people that have no real experience, that have read the back of a Bondo brand can or looked on the internet in those idiot forums. Go to a real body shop that does it on a day to day production basis and you will see reality.
Thank you for demonstrating EVC products but please do not use cardboard to mix filler on. Cardboard is very porous and will change the chemistry of the product by absorbing the resin so the filler may not perform as well as it should.
Sorry to bust your bubble but please do not confuse people by telling them that nonsense. I have been doing this for close to 50 years, DOESN't HURT IT ALL. GO to real body shops that do this on a production level and they use cardboard. When you get the experience I have and make you own videos, then you opinion might count. But when people like you pop on here and make comments like that, makes me mad. Why? Well if you already know so much about mixing body filler, then why are you watching this video. I don't go watch videos on stuff I already know. Cardboard is perfectly fine to use, has been since body fillers came out. Only someone that reads the internet would make a comment like that. Real life, cardboard is highly used.
@@RodsshopOrg he is right,cardboard absorbes a small part of the resin which does change the mix…resin is what makes it stick otherwise your just using puddy…...I know how to do a lot of things but still always look at videos to see if theirs a better way…plastic Dixie plates work….the whole I’ve been doing this for years argument is old and tired…and is simple to dismiss….you’ve been doing it wrong for years…what ever you want to do with your car but if I’m spending 1,000$ on paint and the time and effort to do the job…why would you not do it 100% correctly….but I’m not painting a car that will be sold in the next 5-10 years my car will be passed on to my kids
Better tell the tens of thousands of other body shops in the world then. You seem to be the only one that knows more than we do. What I can't understand, if you know more than everyone else about it, why in the hell are you watching videos on how to mix body fillers. Either create your own or d quit this hater criticizing stuff!!!!! If you are at home and you got your little can of Bondo brand body filler that the can says all over the back of it not to use cardboard and you are working on your little one time project, you go buy yourself 25 to 50 sheets and pallet for mixing body filler. But when you are running hundreds of cars in and out of a shop and have 10 project cars going at once, you might wake up and realize, the little pallet and sheets just are not practical. Also, BONDO SUCKSSSSS. It is the worst body filler on the planet and all their information is retarded. I have almost 50 years of mixing body filler on cardboard. NEVER, EVER EVER NEVER, EVER have I had the filler fail, to come back on me, to shrink, pin-hole or any of the crap that people with no real shop experience want to point out issues. When you got the experience that I have, we can argue it. Or better yet, you do a video showing that mixing on cardboard doesn't work.
@@RodsshopOrg Good for you RodsShop. I was thinking the same thing. Why the heck is this guy watching your video if he knows so much. Thanks much for the video.
@@RodsshopOrg Wish I had seen this earlier. Hate to break it to you but I am a manufacture BDM for ITW/Evercoat for the last nine years. We are the largest manufacture in the world of fillers and putty’s.I know what I am talking about when I recommend to NOT use card board to mix on.
It's nice having review videos like this, for those of us who haven't mixed this stuff in a while.
Thank you very much!
Thanks for simplifying the mixture ratio, you are a pro, a teacher, a father and indeed a professional.
Excellent video, now I know how the Pro's do it.
I love this video because it is easy to follow, this will be my first time, thanks.
Glad I could help, best of luck on your projects
On god rodshop best video I’ve ever watched 😮
We're from Gibson Tech, thank you for the informative video.
Thanks for posting the video It really helped me out a lot
Thank you! It is a nice tutorial! I use body filler once in a few years and it is nice to refresh my memory before starting a new car project as I plan to do today. Blessings!
best video n information i have seing...thank you
Thanks for the review. Any tips on how to prevent the body filler from cracking after being installed?
If it’s cracking it because you are putting to much hardner
Thank you!
Glad I could help
Wonderful thanks
Looks like the amount of hardener corresponds to a line drawn between 10 o'clock and 2 o'clock on the circle of filler. Thanks for the demo!
I need a link to cream hardener production video please
amzn.to/3VzzaBN
Great vid , thanx
We’re from Gibson tech and this video was very helpful❤️
Great video!
is the rule of thumb 1/2" high blob of bondo then across the blob.
It is best to go by the video, there is no real rule of thumb. The cans tell you to put two drops which makes no sense. Just a thin line about a quarter way down of a circle of body filler. You can adjust how heavy of a line based on temperature you are working in.
Can you mix this in a cup
You could but you wouldn't want to do that. You need it on a flat surface so you can pull it off with a body filler spreader. If it is down in a cup, it wouldn't work.
@@RodsshopOrg thanks for the quick reply!
@@DeliciousDisasters Glad I could help
Thank you very much
THANKS
Nice
why is some hardener red and some blue?
In the past, the only difference between red blue and white, was just the coloring. Usually this was just a difference in manufacturers. Now they are making the colors to represent speed of hardening. I have not actually tried the color for speed hardeners yet. I usually stick with the blue. I do know this, stay away from Bondo brand filler. They advertise they are the best, but when you go to most body shops, they use Evercoat. Bondo brand packs up the sandpaper and I have seen where later on it shrinks and causes problems. Use what the pros use, Evercoat.
@@RodsshopOrg So the blue stuff works for bondo then.. I have been throwing them in the corner..THANKS! And stay away from bondo ok thanks
@@tuffy16 Blue works in all body fillers, the same as all the other colors. I just do not use Bondo Brand filler made by 3M because it sucks compared to the others. I just prefer blue just because I am used to the mixed color and knowing when I have just the right amount. But there really isn't any difference in the other colors other than now they are making different colors for different speed in sure times. But it should tell you that on the tubes if you have one of those.
@@RodsshopOrg Thank you !
Liked
It's best to use a mixing board.
Only if you are reading the back of the crap Bondo Brand can. Professional body shops all use cardboard. Over 40 years of doing this way and NEVER had an issue. So I think I have proved it works just fine.
So USE A STICK GUYSB😂
Ahhhhh you’re not supposed to stir ittt
Been doing it just like this video for over 40 years, never, not one time has it had issues. So it works and if you know it all, then why are you watching this video? You can stir it as long as you are not whipping it.
I used your method and the filler turned to cottage cheese too fast and it became unusable. I cut down the amount by half of what you showed and was able to use that amount without it turning to cottage cheese.
My method is 40 plus years solid, however, I do mention in the video and it is highly important to change the amount of hardener based on the surrounding temperatures and humidity.
If you are mixing filler in like temps in the 90's, you will want to use less. Plus, this will also be affected by brands of body filler you are using.
I always suggest if you do not know your body filler, as in never used it before. Mix you up some and test it out before actually doing the body work job on the car you are planning on painting.
I will say, I have never seen body filler turn into cottage cheese type texture. Usually if it is too much hardener, it just hardens before you can spread it.
Glad you got it figured out and make it work for you.
Air bubbles😂
You can use a paint stick, I clearly stated in the video that you do not mix it fast or churn in. Been doing it a long time and never had any air bubbles in my filler.
If you know so much, why are you watching these videos?
Don’t mind him love your tutoring ❤
You're not supposed to mix it with a stick. Create hair bubbles.
Ong
This sucks I just purchased this got in to my project and mixed all my body filler wrong
How do you know you mixed the filler wrong. Did it harden and were you able to sand it?
The only two bad situations are, if you didn't get enough hardener in it and it never fully cured. Or if you mix too much hardener in it, the bleach that is in the hardener can cause spots or stain in your paint job down the road.
Tell me why you feel it is wrong?
Everything's good except you're not supposed to use cardboard.
Yes, you can use cardboard, most body shops do because it is quicker and cheaper. You have been reading the back of a Bondo can and they are completely STUPID!!!...
I have been doing this for over 40 years and have never had one issue in my filler. Question is, if you know so much about it, then why are you watching the video, or are you a troll?
NEVER stir bondo always fold.
Got almost 50 years of doing this way that says different. My question is, if you think you already know all about it, why are you watching the video. Just so you can criticize me? You can stir body filer and if you noticed, I pulled the two parts together at first. You just can't stir fast and whip it to cause air bubbles. Don't be getting on here leaving comments that is going to confuse others. My way has worked for almost 50 years, never had an issue. I get comments like this from people that have no real experience, that have read the back of a Bondo brand can or looked on the internet in those idiot forums. Go to a real body shop that does it on a day to day production basis and you will see reality.
Thank you for demonstrating EVC products but please do not use cardboard to mix filler on. Cardboard is very porous and will change the chemistry of the product by absorbing the resin so the filler may not perform as well as it should.
Sorry to bust your bubble but please do not confuse people by telling them that nonsense. I have been doing this for close to 50 years, DOESN't HURT IT ALL. GO to real body shops that do this on a production level and they use cardboard. When you get the experience I have and make you own videos, then you opinion might count. But when people like you pop on here and make comments like that, makes me mad. Why? Well if you already know so much about mixing body filler, then why are you watching this video. I don't go watch videos on stuff I already know. Cardboard is perfectly fine to use, has been since body fillers came out. Only someone that reads the internet would make a comment like that. Real life, cardboard is highly used.
@@RodsshopOrg he is right,cardboard absorbes a small part of the resin which does change the mix…resin is what makes it stick otherwise your just using puddy…...I know how to do a lot of things but still always look at videos to see if theirs a better way…plastic Dixie plates work….the whole I’ve been doing this for years argument is old and tired…and is simple to dismiss….you’ve been doing it wrong for years…what ever you want to do with your car but if I’m spending 1,000$ on paint and the time and effort to do the job…why would you not do it 100% correctly….but I’m not painting a car that will be sold in the next 5-10 years my car will be passed on to my kids
Better tell the tens of thousands of other body shops in the world then. You seem to be the only one that knows more than we do. What I can't understand, if you know more than everyone else about it, why in the hell are you watching videos on how to mix body fillers. Either create your own or d quit this hater criticizing stuff!!!!!
If you are at home and you got your little can of Bondo brand body filler that the can says all over the back of it not to use cardboard and you are working on your little one time project, you go buy yourself 25 to 50 sheets and pallet for mixing body filler. But when you are running hundreds of cars in and out of a shop and have 10 project cars going at once, you might wake up and realize, the little pallet and sheets just are not practical. Also, BONDO SUCKSSSSS. It is the worst body filler on the planet and all their information is retarded. I have almost 50 years of mixing body filler on cardboard. NEVER, EVER EVER NEVER, EVER have I had the filler fail, to come back on me, to shrink, pin-hole or any of the crap that people with no real shop experience want to point out issues. When you got the experience that I have, we can argue it. Or better yet, you do a video showing that mixing on cardboard doesn't work.
@@RodsshopOrg Good for you RodsShop. I was thinking the same thing. Why the heck is this guy watching your video if he knows so much. Thanks much for the video.
@@RodsshopOrg Wish I had seen this earlier. Hate to break it to you but I am a manufacture BDM for ITW/Evercoat for the last nine years. We are the largest manufacture in the world of fillers and putty’s.I know what I am talking about when I recommend to NOT use card board to mix on.
Thanks