INEOS Grenadier Supra Shifter Swap
HTML-код
- Опубликовано: 6 сен 2024
- We love the clean utilitarian lines of the INEOS Grenadier and Quartermaster interior. We also love the BMW B58 engine. That said, the shifter (out of a BMW Z4) looks far to modern and out of place.
The shift knob/stalk can be swapped with a simpler-looking version from a Toyota Supra. The Supra shifter fits much better with the lines and look of the INEOS interior.
In this video, we show you in step-by-step form how to swap a 2021 Supra Shifter in place of the swoopy BMW unit that comes stock on the INEOS
www.owloffroad.com
Part number: Gear Shift Assembly - Toyota (33550-WAA01)
Always thought the BMW shifter looked out of place, this does look better for sure!
Bought it by the part number you thankfully put in the discretion.. it came 2 hours ago.. I followed the steps in the video and MAN.. it is 🔥 thanks again
Glad it went well
That looks fantastic and matches perfectly to the low range knob! I wonder why Inneos never used the Toyota part seeing it is the same transmission and was already in production. It looks like that is how it was meant to be from day one!
Perfect! Looks way better than before 🚀
The most important upgrade for this newly developed Offroader 😉
That looks so much better!
🔥🔥🔥🔥 finally the knob can fit a lot better, thank you 🙏🏼
I think your vid really helps and I do like the Supra shifter much better. As soon as Ineos gets the diesel engine I’m an instant buyer.
Great mod. Great step-by-step vid.
Fabulous job John ✨✨✨✨✨👍.
Thanks for the great video! Like it or not, now there is an option more to choose from.😊
Great job. Looks so much better! Thanks for sharing.
Thanks for the video. did mine today. super simple
Awesome stuff! Think it’s feasible to use a heat gun to soften the glue on the Grenadier’s shifter? I’d rather not Hulk Smash it loose XD
wow, that is super cool and for sure doing this.
100% better. imo!
Best mod for these vehicles and this should be their spec going forward. Now worthy of the character of the Grenadier. That Beemer one looks so out of place.
So much better!!🏁🏁
Very similar shifter operation to products from Land Rover, Alfa Romeo, and the 2024 Iveco Daily vans, all which have the ZF 8HP transmission. It's possible that ZF manufactures the shifters for each brands to their individual aesthetic.
The Land Rover one is a pain. The safety catch is on the top on the backside of the lever, but it's a button not a trigger. The amount of times I didn't press the button hard enough for it to release - never had that with any other brand!
Awesome video. I like the little M Power vinyl you have underneath as well, please share a link of where I can order it? That Supra shifter looks awesome!
www.ebay.com/itm/266893592739?epid=3026326787&itmmeta=01J3DHMJK5QPY8VW5ZV7VM0MB5&hash=item3e241908a3:g:7q0AAOSw9phmiYqj&itmprp=enc%3AAQAJAAAA4Nb7BEb4XlnINuFdUs%2BIqX7I1idc9x4igpwCPkn3P53s3bfJayQQqJokwcSTMe6rZBUulpCEIWu8VOMCQYN3mwQzpof%2BuXwPpOhr%2FqPER9vu3vCw4cHzEEVfoPbfNwYJnuI2T2RBwb7W0Wj3aDNNhqfdc34EmnFjIjewiGhfDZx2CkuYhmJLWxEXRyCsQ2UUvxea88v1rTKflLHN5iEUsaz6eDaU2zPoa%2BT645nJ1LwASDRwmqiSe7Rmyn0lVOquT3nR5Xuuf921qk%2FhAYRxWPEXPgAwKyMQvtjbUPD5tx54%7Ctkp%3ABFBM5qnSsZtk
probably ineos will design a shiftknob themself for the facelift, if the grenadier remeains a success.
Nicely done 😊
Great video and I love your Grenadier back door handle. And I just ordered the hood release handle. I want to do the same. When you were lifting off the BMW shifter it seemed stuck. Is it glued? If not glued, can you just twist it to loosen it up? I just want to be very, very careful with the cable tape and not break it.
Yes it was stuck. It isn’t glued and does not twist. The post is not round so it only goes up and down. Maybe have someone hold down slightly on it while you pry up on it.
@@owloffroad How about spraying some teflon lube up from the bottom?
Thanks!
Thank you so much!
A shame they didn't fit as standard.
You’d think you could just pull the interior panel and swap the entire shift module out, rather than take everything apart? Or is it not the same?
It would be massively more work
@@owloffroad I agree, looks bitchen. Solid work.
Cant just swap the whole assembly?
Massively more work with out any benefit that we can see
Will you guys install?
It would have to be at our Phoenix location and you would need to supply the shifter
So 2nd hand Supra shifters on eBay will be $350 each now, if you can find one 😝
Yeah, I guess this video moved the needle a little
What is the part number for the Supra knob?
Part number: Gear Shift Assembly - Toyota (33550-WAA01)
No backup camera activation?
It does, we have our rear camera unplugged testing another product
@@owloffroad share that video too please..
@@FrancoisBadenhorst Will do, need to finish the product first
Why???????
mmm it is just a gear lever, I personally do not care what it looks like.
BMW shifter looks more contemporary and sport. Supra lacks both contemporary and sportiness. It looks like a frumpy rectangle with no style. Very typical of Japanese designs of the past and present.
Think that’s the point the BMW shifter looks like a girls stilettos 👠 in vehicle that made for boots
Looks better, but unnecessary. I literally never look at my shifter when I’m driving. I’m of the mind why change things for aesthetics value only? If a mod enhances the utility or capabilities of a vehicle, great. Otherwise changing things because it “looks better” as the only justification. Meh. I’d rather just go out and spend the time using the truck instead.