Hi, I'm Steve, nonda's lead mechanic engineer. Feel free to leave your comments here if you have any mechanic questions, I will be glad to help you out!
Hi my bmw x5m has got po012 and po022. Can clear the codes and get into boost but it shuts the car down. I changed the battery cause the other was a bit weak. But I’m in almost limp mode now
I have a 2010 ford expedition XLT EL with a 5.4 V8, popped this code up this morning. Did some research and it claims to point to camshaft position sensor, what are the odds of it being something different, was gonna change both sensors and see what happens but i know its likely that it can be something else
@@nondainc only codes are for the stereo because I have an aftermarket stereo. Only code is 0022. But I will take the car Saturday to Volkswagen and let them check. It drives normal besides white smoke from exhaust but coolant is still sitting at Max and no boost. But I will definitely have Volkswagen check it out. Thanks
I keep 5W-20 and 5W-30 oil for my two cars. Can using the wrong oil cause this code to pop up? I might have grabbed the wrong oil when I changed the oil last...🤷♂️
@@GatesRapes interesting. Maybe I'll try that. For anyone who's following up on this for their own cars, I changed my oil again to eliminate the possibility that the wrong oil was in there, it ran smoother for a while but it's reverted to having the same issue. Although the check engine light does turn off every once in a while unlike before.
Hello, as you are receiving more than one error code, we highly suggest getting your vehicle visually checked by your local mechanic for further diagnosis.
I have an 05 Audi Allroad Quattro 2.7t, I have the P0022, P0491, and P0492 codes. Car would crank but not start. I changed the oil and it started running again for about 4 days, just went to start it again and it won't start. I tried to search for the Camshaft Oil Control Valve online, but I cannot find it for this model. Is the part called something else on this car?
Hi Cameron, an oil change is recommended and please follow which viscosity of oil you should use. Let us know if the issue will still persist after an oil change. Also, double check if there's any other trouble code that registers along with this code.
@@nondainc P0022 INT Cam Position Timing Over Ret Bank 2 P0171 System Too Lean (Bank 1) P0302 Cylinder 2 Misfire Detected P0345 CMP Sensor A Circuit Problem - Bank 2 P0420 Bank 1 Catalyst Efficiency Below Limit P0430
Hi Cameron, since you are getting multiple error codes, it is best to get your vehicle visually inspected by your local mechanic. If you are not satisfied with the diagnosis of your first mechanic then I would suggest to get a second opinion. Have it visually checked by other mechanic.
Hello, we suggest to fix this as soon as possible as this code can severely affect the drivability of your vehicle and extended driving with this can cause internal engine damage.
![How to Fix P0012 Engine Code in 4 Minutes [2 DIY Methods / Only $6.86]](http://i.ytimg.com/vi/Pu-PR3uhV5Q/mqdefault.jpg)
![How to Fix P0012 Engine Code in 4 Minutes [2 DIY Methods / Only $6.86]](/img/tr.png)
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Hi, I'm Steve, nonda's lead mechanic engineer.
Feel free to leave your comments here if you have any mechanic questions, I will be glad to help you out!
Is it a camshaft position sensor or a crankshaft position sensor
I changed out the intake valve and I am still getting the p0022 error code. Do I need to clean or change the exhaust one also?
@@lilkgb477 It may be a stretched timing chain.
Hi my bmw x5m has got po012 and po022. Can clear the codes and get into boost but it shuts the car down. I changed the battery cause the other was a bit weak. But I’m in almost limp mode now
I have a 2010 ford expedition XLT EL with a 5.4 V8, popped this code up this morning. Did some research and it claims to point to camshaft position sensor, what are the odds of it being something different, was gonna change both sensors and see what happens but i know its likely that it can be something else
Hello, kindly make sure that the condition/viscosity of the oil is okay. Check also the wiring and timing chain.
Hi did you fix the issue? if you did how did you pls?
I replaced both vct sensors, checked oil (looks clean and full) and I’m still getting codes p0022 & p0012 please help
Hello, please provide us the year, make and model of your vehicle so we can address your concern specifically for your car's make/model.
@@nondainc I have an 09 f150 xlt 5.4 v8
Kindly check the engine timing chain tensioner if faulty and needs replacement.
@@nondainc should I just go ahead and order a new cloyes timing chain & component kit?
@@nondainc hello
I got P022 error but no check light and the engine is not starting , why there is no check light?
Hi Waseem, please provide us with your vehicle's year, make and model.
I have engine light on and code reader came
Up I just spent 3400 to rebuild my transmission
I replaced magnet, camshaft valve and wiring and oil and oil filter, I'm still getting the 0022 code after clearing code.
Hi David, there could be an issue with your timing chain and the PCM. Please also check if there's any other code that registers along with this code.
@@nondainc only codes are for the stereo because I have an aftermarket stereo. Only code is 0022. But I will take the car Saturday to Volkswagen and let them check. It drives normal besides white smoke from exhaust but coolant is still sitting at Max and no boost. But I will definitely have Volkswagen check it out. Thanks
I keep 5W-20 and 5W-30 oil for my two cars. Can using the wrong oil cause this code to pop up? I might have grabbed the wrong oil when I changed the oil last...🤷♂️
Hi Kyle, yes- please follow the viscosity recommendations for your vehicle make/model for proper lubrication.
I switched from synthetic 5w30 to 5w30 conventional and it's been 10k miles, no codes !! V6 Taco
@@GatesRapes interesting. Maybe I'll try that. For anyone who's following up on this for their own cars, I changed my oil again to eliminate the possibility that the wrong oil was in there, it ran smoother for a while but it's reverted to having the same issue. Although the check engine light does turn off every once in a while unlike before.
Oil was all ready changed a day prior I had a p2092 code change that now I have that p0022 code
Hello, as you are receiving more than one error code, we highly suggest getting your vehicle visually checked by your local mechanic for further diagnosis.
I have an 05 Audi Allroad Quattro 2.7t, I have the P0022, P0491, and P0492 codes. Car would crank but not start. I changed the oil and it started running again for about 4 days, just went to start it again and it won't start. I tried to search for the Camshaft Oil Control Valve online, but I cannot find it for this model. Is the part called something else on this car?
Hi Damon, since you are receiving multiple codes, we suggest getting your vehicle visually inspected by your local mechanic for further diagnosis.
Great 👌
We appreciate your feedback!
I have this code but my mechanic is saying i will have replace the engine. Is that true?
Hi Cameron, please provide us with your vehicle's year, make and model.
@@nondainc 04 ford f150 5.4L v8
Hi Cameron, an oil change is recommended and please follow which viscosity of oil you should use. Let us know if the issue will still persist after an oil change. Also, double check if there's any other trouble code that registers along with this code.
@@nondainc P0022
INT Cam Position Timing Over Ret Bank 2
P0171
System Too Lean (Bank 1)
P0302
Cylinder 2 Misfire Detected
P0345
CMP Sensor A Circuit Problem - Bank 2
P0420
Bank 1 Catalyst Efficiency Below Limit
P0430
Hi Cameron, since you are getting multiple error codes, it is best to get your vehicle visually inspected by your local mechanic. If you are not satisfied with the diagnosis of your first mechanic then I would suggest to get a second opinion. Have it visually checked by other mechanic.
Can you drive your car with a P0022 code
Hello, we suggest to fix this as soon as possible as this code can severely affect the drivability of your vehicle and extended driving with this can cause internal engine damage.
@@nondainc DOes it mean the chain jumped timing or just a cam sensor is bad or can it be just an oil change????
This ai training is silly. Good luck!