Lincoln 210MP FAQ's - What You Want To Know Before Making An Investment Into A Lincoln 210MP

In this video I answer commonly asked questions regarding the Lincoln Electric 210MP. Links below for more information.
Lincoln 210MP
amzn.to/3l8nlTU
Lincoln 210MP (One Pak)
amzn.to/3ytFzlT
Lincoln Pro100SG (Spool Gun)
amzn.to/3Jew3I4
Nova Tig Kit
amzn.to/3JwD8oW
Westinghouse WGEN9500DF
amzn.to/3LmgIb8
Westinghouse WGEN5300
amzn.to/3J8YFm9
Yeswelder LYG-M800H / HB
amzn.to/3Zufvmy
Yeswelder Cheater(magnifying) Lenses
amzn.to/3L1FLzZ
Note: The above links are Amazon affiliate links, which I earn from with qualifying purchases. Thank you for the support.
Visit my Amazon store
www.amazon.com/shop/challenge...
Links Below To Find Me On Social Media
C.T.B on Tiktok
/ challenge_the_build
C.T.B on Instagram
challenge_t...
C.T.B on Twitter
DieselViking60?s=01
C.T.B on Ebay
ebay.com/str/challengethebuild
#lincolnelectric #FAQs #Welding

[@wurlabyscott]

Thanks for doing the leg work for your questions.

[@ChallengeTheBuild]

Thanks for the watch and comment!

[@callaway633]

Thanks for the video!
How is the nova tig setup holding up. It’s so much less expensive than the Lincoln so I’m hoping it’s good.

[@ChallengeTheBuild]

The Nova Tig Kit is still holding up however ever since I got the ArcCaptain TIG200 I was introduced to HF start Tig welding and since then have not used the lift arc tig setup. And I bet the TIG200 is about the same price as the Nova kit... If you are looking to learn tig welding I would suggest the HF start... However if you are looking for additional options for your lincoln 210 then the nova kit is a good value and works fine. Hopefully this helps you... Good luck 👍

[@adamschmidt4387]

The plug on my lincoln 210 is the 230v 3 prong the one on the wgen9500df looks to be 240v 4 prong....how do you swap that out or can you just get an adaptor for my 3 prong to go to 4 prong?

[@ChallengeTheBuild]

Do you by any chance follow me on Instagram? Follow me there and I can post a picture... I am PRETTY sure the welder will plug in, its just the cord will sorta be upside down (ground up)... The nema 14-50 just has a neutral that the 210mp plug wont use. The welder when running 220v has two hots and the ground and if you flip the plug I THINK it will plug into the generator (looking at the picture) .. The reason I ask if you follow me on IG is I can test this out... I have my generator wired directly into my panel and then have an outlet wired to my panel for my welder/plasma cutter...

[@ChallengeTheBuild]

SO I was wrong.. The nema 14-50 is slightly larger in size🤦‍♂️ I did not know that until now, I tried plugging in my cord and it did not fit. So in this case you can see if there's an adapter or you may have to make a custom adapter extension cord using a 14-50 nema plug and the proper outlet making sure to use the proper ga wire... I made one using 6ga. Hope this helped.. Good luck👍 Side note the generator is awesome, I love mine the remote start is where it's at!

[@adamschmidt4387]

Haha it’s all good! I did find an adaptor for it so that should work! That’s remote idk how much I’ll use that I’m using it to go mobile in the summer when I’m off work for the most part unless we do have a power outage