If I have B1001 on my 04 silverado and my truck wont communicate with the vtd to do the relearn for that, If i send you the srs module under the drivers seat and you reset it will i be able to program the restraint id using the tech 2 into and get rid of the code that way?
@@SpartanAutoworx I can communicate with all modules except the vtd with the tech 2. I dont even know where to start. There are not any class 2 dtc codes either. everything else in my truck works correctly I just swapped in a loaded bcm when i did the heated memory seat swap and wanted to get rid of the airbag light that came with it
I took off the whole center console (on my Crew Cab 2009 Silverado 1500 LT Z71), and didn’t find the damn module! I have seen under the seats but it doesn’t seem to be there either! I’m left with pretty much no other option but to take off the seats and look under the carpet. Maybe? 😖. HELP!!! 😫😫😩😩
Found it! It was under the carpet under the driver seat. It wasn’t as hard as I thought to get to it. (And if you’re wondering), I sent it to MyAirbag.com to get it fixed for around $60 bucks. Pretty cool I’d say. 😉 😎 😃
My 03 GMC Yukon was in a collision and drivers side airbag deployed. Replaced air bag and SRS control module from another 03 Yukon. Still get B0051 code and light flashes 6 times and stays on.
Russell Johnson do you have the original airbag module? The new module needs to be seated via security relearn. If you have the old module we can just clear the crash.
Hello yes I had service airbag system on my icd display, I replaced impact sensor up front and it still there. Do I need to replace module under seat? There has been no crash or deployment. 2005 gmc 2500
Is this the same in the 2005? Mine has a different part number
If I have B1001 on my 04 silverado and my truck wont communicate with the vtd to do the relearn for that, If i send you the srs module under the drivers seat and you reset it will i be able to program the restraint id using the tech 2 into and get rid of the code that way?
No a reset on the bench would not fix that issue.
you have a communication issue you need to diagnose first
@@SpartanAutoworx I can communicate with all modules except the vtd with the tech 2. I dont even know where to start. There are not any class 2 dtc codes either. everything else in my truck works correctly I just swapped in a loaded bcm when i did the heated memory seat swap and wanted to get rid of the airbag light that came with it
I took off the whole center console (on my Crew Cab 2009 Silverado 1500 LT Z71), and didn’t find the damn module! I have seen under the seats but it doesn’t seem to be there either! I’m left with pretty much no other option but to take off the seats and look under the carpet. Maybe? 😖. HELP!!! 😫😫😩😩
Under the drivers seat carpet. What code do you have? We dont repair 07-09 metal modules that you will find in that truck
@@SpartanAutoworx B0052
@@SpartanAutoworx thanks for the help and for the heads up. Any idea where I can get this code clear up? Thanks again. 👌
Sometimes they are under the center console too. The one in my Tahoe is under there.
Found it! It was under the carpet under the driver seat. It wasn’t as hard as I thought to get to it. (And if you’re wondering), I sent it to MyAirbag.com to get it fixed for around $60 bucks. Pretty cool I’d say.
😉 😎 😃
My 03 GMC Yukon was in a collision and drivers side airbag deployed. Replaced air bag and SRS control module from another 03 Yukon. Still get B0051 code and light flashes 6 times and stays on.
Russell Johnson do you have the original airbag module? The new module needs to be seated via security relearn. If you have the old module we can just clear the crash.
Hello yes I had service airbag system on my icd display, I replaced impact sensor up front and it still there. Do I need to replace module under seat? There has been no crash or deployment. 2005 gmc 2500
What is the code?
There is no airbag light on, it’s just the display saying service airbag system 🤷🏻♂️
@@Jadair419 should still try and scan it . Even if the airbag light isn’t on ? Maybe there’s a history code.
I have a Buick lacrosse cxl 2011 can you reset it and how much does it cost
Dont think I can. If its a plastic module you can do it by good scanner and just clear codes.