George, I'm going to have my body shop contact you because the really need this! They not only have to reset my car, but they have another in the shop that's been sitting waiting for a module for a month now.
I have the two curtains deployed on my Ford Fiesta, to be clear, first I must remove the module and send it to reset, and I put the new curtains and that's it. I don't need to do anything else on the vehicle's computer. Thanks for your video.
Hi George, great job. You will save lots of money from many people. I have the same problem at my Honda crv. Could you please tell me how I get the software and the OBD2 cable? Thanks
Hi George great job I have a similar accident my curtain air bag left side Blow out please let me know how can I get the software end the obd2 wire or cable connector to my laptop ; keep posting more videos that really help people and will be rewarded of blessings
Hey George thanks for the share I really need to do this to my Chevy truck will the same stuff work for it? Where can I obtain the software and the tool that plugs into your obd2
Hi George this is a great video and a very good job well done thanks for telling us on how to do this i hope i could get the hard and soft copy from you. Thanks
Hello George, it's great having great people like you. Will the software work on every vehicle? Please I have interest in the software and the pass through device. Thanks.
Hey I like this procedure and thank you for posing it on RUclips. Can you tell me where I can download that software you used to rewrite the EPROM please?
You said in the video you can/will reprogram someone's module. What is your repair cost to reset a module? I have a 2008 nissan versa that had a deer accident. I replaced the steering airbag, both front seatbelt pretensioners, clock spring and put a brand new front crash sensor behind the bumper. I had sent my module to another company in Georgia who said they could clear my B1209 code, but after paying them, and receiving the module back, the code had not been removed.... so that was $100 i lost with shipping and unfinished repair.... Thanks!
Does this work on older BMW’s, like E39 520i? If so.. I would gladly know what kind of software you use!😃 And thanks alot for sharing this vid! Best regards from Norway!
Hi George, I have a 2015 Nissan Rogue & 2013 Nissan Maxima. They are both low milage and excellent mechanical condition. They both have had airbags deployed and repaired back to working order. Recently, both started having the airbag light on solid on the Rogue and flashing on the Maxima. Can you share where I can download the software. I see OBD2 wires that connects to USB on Amazon. I have laptops with window 10 & 11. Do I need any other devices other than the software to make this work and are there specific brands to purchase?
Hey George, great video. I just finished my rebuild of my 2015 Jaguar F-Type. All new drivers airbag and seatbelt but cannot get rid of the hard code. Can you message me and let me know how to get the cable and software to preform this data dump please. Thanks!
Can you do a 2004 Volvo XC70 module? Also, when you clear it can you send a report indicating if the seatbelt tensioner fired? Front right hit a curb, no passenger but dash airbag went off.
Hey George thanks for sharing this is really awesome i actually had a couple of questions about this i work alot alot of Honda and Toyota would this same process work for those cars as well and i wanted get more info on your software that your using
George would this set up work Removing the Air bag Crash Data thru the OBD2 Connector with out removing The Airbag Module ? On a 2003-2007 Honda Accord, And On a 2006-2011 Honda Civic ?
Wish he had prefaced the first few seconds of this video with "this is for professionals" or a "good investment for body shops". This is not for your average Joe who needs a one off airbag reset. It's not until several minutes into it that he gives that disclaimer.
Hi Mr. Melnik, I spoke with one of your sales men about this software and he said he did not have knowledge of the product you mentioned here. Could you just add a link in your comments of where to obtain the software and OBD2 cable. This is what your sales person asked me to do as he gets several calls per day of people asking where to get the software package. Thank-you.
Hi ! how do I get in contact with you I have a few questions before I purchase the system to make sure I'm buying the right one !!! thanks in advance .
Hello, I purchase a 2011 Ford Fusion about 6 years ago with the airbag light on. It has a salvage title and very likely experienced a crash. I would like to reset the airbag control module. What what you recommend?
I have a 2017 journey 3 curtain airbags are blown if I dont replace them and send you the module to be reset is the airbag light still coming on or no?
The total different system you have to remove the abs tire pressure traction control. How can I remove because I have it now on my car after I reset the crash module ?
I have a infinit jx35 I just brought from the auction will this work? all is changed but the light is on still flashing...also can I swap this with a 2018 pathfinder that some is selling as parts.
I have a 2017 c300 coupe4-Matic with 3 deployed air bags. I need the vehicle to run so I can move it around shop parking lot. How can I enable engine start?
Hi. If the diagnostic tool says no communication with the airbag module, what can I do in this instance ? It’s a fiat bravo 2008. I got a used module with the same codes and I’m waiting to arrive . Someone told me it’s plug and play . It’s that Wright or it needs to be programmed ?
What about Mercedes 05 do I need to change the module or can just buy a used driver air bag and crash sensor and do that reset. And if you can help me with what part number do I match to buy the right one for my car says Q08 and I see others that have the same first few number but they all end with different numbers. I see q01 Q02. And so on.
Hello, this is a great video. I have the same issue for Airbag Module as I replaced my seat Airbag and Seat belt. How can I get the software and to contact you? Where are you located? Also, new sub to your channel.
Hi George my name is Yuriy if it possible can you let me know what software you use and where I can get it? Also what tablet you use . Thank you have a good day.
I don't think. George answers his Followers 😔
What software do you use on your laptop? Also what diagnostic tablet do you use?
That's a launch obd2 scan tool about 250$
And the airbag software with the obd2 called diatronik about 1200$
😂1200$ 😅😅😅😅😅😅😅😅
George, I'm going to have my body shop contact you because the really need this! They not only have to reset my car, but they have another in the shop that's been sitting waiting for a module for a month now.
I have the two curtains deployed on my Ford Fiesta, to be clear, first I must remove the module and send it to reset, and I put the new curtains and that's it. I don't need to do anything else on the vehicle's computer. Thanks for your video.
hello George, thank you for sharing this! will you share what software you were using here?
Diatronik
@@algeriathelandofterrorists3329
Hi George, I love your work. Please let me know how to obtain the software.
Hi George, This is great. Can you share how I can download the software and where can I buy OBD2 wire that connects to USB
Hi George, been a avid follower of your channel. I'm wondering what scanner and what software you use?
I want to know too how do I get this computer program?
It’s a launch scanner / software
Hi. I would like to obtain this software and the interface cable. Thanks in advance
Hi George, great job. You will save lots of money from many people. I have the same problem at my Honda crv. Could you please tell me how I get the software and the OBD2 cable? Thanks
Not all cars can be cleared through obd2! Do research before buying any tool.
@@MarioHernandez-bn6pm where to research? google kinda loosy,
I need to learn something to get work
@@fayez6995 just take the module somewhere to get done. If you don’t know how to do this type of work you will damage the module
Hi George, this is a great rescue from you and a job well done. Thanks a lot for sharing and I hope I could get both the hard and soft copy from you.
Hi George great job I have a similar accident my curtain air bag left side
Blow out please let me know how can I get the software end the obd2 wire or cable connector to my laptop ; keep posting more videos that really help people and will be rewarded of blessings
Hey George thanks for the share I really need to do this to my Chevy truck will the same stuff work for it? Where can I obtain the software and the tool that plugs into your obd2
Hi George this is a great video and a very good job well done thanks for telling us on how to do this i hope i could get the hard and soft copy from you. Thanks
Great video! I’m not in the US but have just started to buy salvage cars and would like to learn all this process.
what country are you at ?
Hello George, it's great having great people like you. Will the software work on every vehicle? Please I have interest in the software and the pass through device. Thanks.
Beautiful stuff, George - very slick, and fantastic money saver, thank you!
Hi George I’m interested in this software could you let me know how to obtain it
Hi George I need your help to get the software and cable to OBD2 thank you,
Hey I like this procedure and thank you for posing it on RUclips. Can you tell me where I can download that software you used to rewrite the EPROM please?
You said in the video you can/will reprogram someone's module. What is your repair cost to reset a module? I have a 2008 nissan versa that had a deer accident. I replaced the steering airbag, both front seatbelt pretensioners, clock spring and put a brand new front crash sensor behind the bumper. I had sent my module to another company in Georgia who said they could clear my B1209 code, but after paying them, and receiving the module back, the code had not been removed.... so that was $100 i lost with shipping and unfinished repair.... Thanks!
Hi George, this is great video can you tell us what's the soft wear you use.
Does this work on older BMW’s, like E39 520i? If so.. I would gladly know what kind of software you use!😃 And thanks alot for sharing this vid! Best regards from Norway!
HI GEORGE THANKS FOR DOING THE VIDEO AND I WOULD LIKE TO OBTAIN THE SOFTWARE AND CABLE. THANKS
U r the best
But what is the tool
Hi George, I have a 2015 Nissan Rogue & 2013 Nissan Maxima. They are both low milage and excellent mechanical condition. They both have had airbags deployed and repaired back to working order. Recently, both started having the airbag light on solid on the Rogue and flashing on the Maxima. Can you share where I can download the software. I see OBD2 wires that connects to USB on Amazon. I have laptops with window 10 & 11. Do I need any other devices other than the software to make this work and are there specific brands to purchase?
Hey George, great video. I just finished my rebuild of my 2015 Jaguar F-Type. All new drivers airbag and seatbelt but cannot get rid of the hard code. Can you message me and let me know how to get the cable and software to preform this data dump please. Thanks!
Hi Tony. Did you ever get this sorted? I am looking to do the same for a 2015 F Type R
You never showed us the airbag light ON with the car running, Just with the ignition on LED light test in progress????
Hey george, What is the software you are using? I would like to buy it..
888999999f350 is o999
Hi can you please share the software and tools? Great video.
Great video.
I have a 2015 Mazda 3 and the air bag light is blinking. WhAt scanner tool would you recommend that I use to read the code for airbag?
Can you do a 2004 Volvo XC70 module? Also, when you clear it can you send a report indicating if the seatbelt tensioner fired? Front right hit a curb, no passenger but dash airbag went off.
What equipment do you need and programs to remove the airbag deploy light without replacing the airbag
Great vid. What software and vci do you use? Id like to buy 1
Hey George thanks for sharing this is really awesome i actually had a couple of questions about this i work alot alot of Honda and Toyota would this same process work for those cars as well and i wanted get more info on your software that your using
George would this set up work
Removing the Air bag Crash Data thru the OBD2 Connector with out removing
The Airbag Module ? On a 2003-2007 Honda Accord,
And On a 2006-2011 Honda Civic ?
Is there a difference between air bag module and air bag reset module?
Wish he had prefaced the first few seconds of this video with "this is for professionals" or a "good investment for body shops". This is not for your average Joe who needs a one off airbag reset. It's not until several minutes into it that he gives that disclaimer.
This is the comment that I was looking for. Thank you.
Hi George, great video. Can you send a download link to the software and does it work for Honda and Toyota as well. Thanks a lot
Did you have any answers yet?
@@marvin7gavarrete no
Awesome thanks
Fixed mine
Hello Farid, can you assist me, I need to clear crash data on my SRS module. Thanks
Great information
So I have a read that says its to the passenger seatbelt. I have a 2007 PT Cruiser. Is it identical to what you are showing on UTUBE?
Hi George, you video is very help full. Please help me with a link to this software. I need to work on my crashed 2017 Renault Koleos. Thanks.
Thank you George for this video....I am interested in this software... Where do i find it?
Can you also do dodge?
Hi Mr. Melnik, I spoke with one of your sales men about this software and he said he did not have knowledge of the product you mentioned here. Could you just add a link in your comments of where to obtain the software and OBD2 cable. This is what your sales person asked me to do as he gets several calls per day of people asking where to get the software package. Thank-you.
Why not just pull the cluster and pull out the air bag bulb?
Hi ! how do I get in contact with you I have a few questions before I purchase the system to make sure I'm buying the right one !!! thanks in advance .
yes
Message me I can help
TheWiseGuy what is the system/program used
@@thewiseguy7100 hey man. Do you know what is the software needed?
Hello, I purchase a 2011 Ford Fusion about 6 years ago with the airbag light on. It has a salvage title and very likely experienced a crash. I would like to reset the airbag control module. What what you recommend?
Hello mate. How can I download that software? Do you need to change the crash sensors or can you reset them too? Thanks in advanced
good job really amazing
Hello George I like what I see can you please tell me the software and where I can get one of those plugs?
Hi I see your video and I need the OBD2 with software can you tell me where can I find it to buy it or order thanks for the helpful video
I guess no response to this ?
How did you learn these stuff ! Any training??
chop shops baby
How do you know what ones can be done on bench or OBD
George hello i have my airbag light on from accident. What is the program to reset this
Hi George would like to obtain this software and the interface cable. Thank you
Hey George how do you download the software and does the software come with the 1200 package or no
I have a 2017 journey 3 curtain airbags are blown if I dont replace them and send you the module to be reset is the airbag light still coming on or no?
The total different system you have to remove the abs tire pressure traction control. How can I remove because I have it now on my car after I reset the crash module ?
Thank you for the great informative video, could I get information on how to obtain the software?
Top off the mrn George im in the Bahamas need to know were I could buy the software from
I have a infinit jx35 I just brought from the auction will this work? all is changed but the light is on still flashing...also can I swap this with a 2018 pathfinder that some is selling as parts.
If you don’t replace the airbags, will the light come back on?
Yes it will
You can hack it if you dont want to replace it
Hi George
Thank you for this amazing video. Can I get a copy of the software please?
can you get rid of the light if you only install the steering wheel airbag and not the curtain airbags?
I have a 2017 c300 coupe4-Matic with 3 deployed air bags. I need the vehicle to run so I can move it around shop parking lot. How can I enable engine start?
Great video ...Thanx
Looks like
Calkmaster
Probyte - software
With a passthrough cable
Think its 1700 euros ish
Dont think you can buy it at the moment
Hope this helps
Good morning George, is there a program to reset Volvo V60 2019? thanks.
any luck? I have a 2019 S60R
Hi. If the diagnostic tool says no communication with the airbag module, what can I do in this instance ? It’s a fiat bravo 2008. I got a used module with the same codes and I’m waiting to arrive . Someone told me it’s plug and play . It’s that Wright or it needs to be programmed ?
Hey George, I had the airbags deployed in my 2011 mustang, can my SRS module be rewritten as well?
I need this program can you give me more info to purchase it
Where can I get this software?
What software do you use & where did you get your diagnostics cable?
What about Mercedes 05 do I need to change the module or can just buy a used driver air bag and crash sensor and do that reset. And if you can help me with what part number do I match to buy the right one for my car says Q08 and I see others that have the same first few number but they all end with different numbers. I see q01 Q02. And so on.
Hi george .. id like the software that u use wonder if u can share info where i can get it..
Hello, this is a great video. I have the same issue for Airbag Module as I replaced my seat Airbag and Seat belt. How can I get the software and to contact you? Where are you located? Also, new sub to your channel.
Great well done
Where you located
I believe you can do it for f 150 2019
Hi George, how do I get software and obd cable?
Please my friend, I need that software
George i would like know where i can purchase this items to perform this in one on my car is honda civic ex 2015
Do you know if a similar process needs to be done with 2007 mb s550 4 matic?
Hey where can we get the cable and program?
I'm interesed in the software. I have a w205 merecedes. Will this work on it?
Hi which obd2 used in this video or the soft ware used I need to get this for my mechanic
Will this work for a 2008 Mercedes C300? Need to verify before I buy.
Will this work on a 2013 chevy silverado 1500
Hey George i need to have my air bag module what for software and scanner did you use
George, can you please let me know if you can reset my srs module? Or tell me how to get the software to do it.
Hi George my name is Yuriy if it possible can you let me know what software you use and where I can get it? Also what tablet you use . Thank you have a good day.
Hey George what’s the name of the obs2 to usb tool and the software you used does it work for Honda?
I have a 2008 infinity G37s coupe that all the airbags has been deployed and the car won't start any idea what happened ??
Hi George, can you tell me the software and what's needed as far as cable?
Thank you for sharing
Hi George
Where can i buy that white obd2 cable please?
Will it work on 2013 Kia optima 2.4l
? If so, what's the cost
any chance of getting the links for all the required software i have a 2020 lexus with the stupid pop up bonnet fault
Hi dear, i have 2016 f150 and i need to clear the fault code without removing the airbag module, is that possible?
wonderful