Do you find any advantage to stacking the springs up on one end rather than spacing the springs out between each of the freezeplugs? Such as; spring-freezeplug-spring-freezeplug-spring-freezeplug etc...
nah, that makes the cup wobble. stacked springs are compressed into a steel coil with the aluminum tube, nice and strong that way. Springs go closest to the barrel to provide airspace (head space). Your cleaning brush goes into this area, since the bristles need to turn before pulling back up barrel.
Id never clean my barrel with a can on it....and I dont think if done properly, with enough springs between plugs, the plugs would wiggle unacceptably. And it would still have springs in the "headspace" section, just not as many, which I think would do wonders for noise reduction. But, im no rocket surgeon with a bunch of money to waste on tax stamps for experiments on youtube 🤷♂️🤣
Why not put springs between the freeze plugs, making a larger "chamber" for the gasses to calm down in, and then tighten em all up with a slightly smaller "headspace" area?
What is the current law regarding solvent traps? I keep reading different conflicting versions, some scary, some not. I've heard you need a form 1 for a solvent trap regardless if you want to modify it or actually use it to capture the solvent.
WTF - F - F ??? I went to their website. Virtually everything is out of stock. The tube length shown in this video doesn't even appear on their web pages.
There should be no issues with this legally As long as you don't complete your build, and wait until you make sure to pay your stamp and then build it and serialize, you should be fine. It's not illegal to build your own . Follow those rules and your legal to my understanding.
This has got to be the most janky "solvent trap" I've ever seen. Bunch of springs, all aluminum, flat baffles..."brought to you by 5 Second Firearms" which is appropriate because that's about how long it would take you to realize you made a huge mistake by buying this crap.
yep, too complex for simple folk. We prove our stuff in the field. It would be nice to upload those vids. But some folks still believe in Santa Claus.......
Did you know its illegal to publicly post how to manufacture a sawed off shotgun? You saw the barrel off. Thats illegal knowledge. Same with mufflers for your gun.
I can't see how these people pretend that this is a solvent trap. It is an obvious end run on suppressor classification. If you want a solvent trap, just slip an empty soda bottle over the end of your rifle. A Coleman fuel filter / funnel can be bought at any sporting goods store. Wala, filtered solvent to return to your container, as if anyone ever collected enough solvent and then returned it to the original container! LMAO. Consider this, $200 tax being constitutional when it comes to suppressors is a valid argument. But as the law stands now, a $200 tax is a molehill compared to the mountain the legal costs you will have when the ATF drops in to inspect your "Solvent Trap." I won't say, don't be stupid because stupid people do stupid things regardless of any warning.
My God you guys keep playing the solvent trap cleaning devices nobody is fooled nobody cleans their guns like that just call it what it is. I don't mean to sound like a ass or be disrespectful I'm just saying show me one video of someone actually cleaning their guns that way
@johnny jones that is hilarious considering there is nobody cleaning their weapons that way. And considering I break mine down and clean and oil each piece individually. And break them down and oil where it's needed when I have not used them in a while my weapons are cleaner than anyone's using that non existent method. I never have any kind of issues with mine. But to be fair show me a video of someone cleaning their weapons with that method and I will apologize and admit I was wrong. Otherwise they are unregistered suppressors and using a unfinished loophole to get around it. I don't care people can do whatever they want just call it what it is though
@@kschantz well honestly I have never had my weapons full of soap and water so there was nothing I couldn't get running a boresnake through. And because I clean them when I am done with them there is nothing caked on that is a problem to get out. I was taught that malfunctions can happen when powder sticks to oil so I don't feel like reducing my survival chances or being unsuccessful in the field. But I can't tell anyone what they should or shouldn't do it's not my life
Man brother I love your wording my friend!;)
I love the sales pitch
This reminds me of the HSN late night knifes sales lol
This is helpful, I like the solvent traps to see if my barrel is flaking any steel
What threads are the end caps? Same as D Cell?
Hahaha. It really does clean my solvent problem.
Do they have anything in stock?
How can he keep from laughing when he says "filtration"?
Do you still sell kits?
I want rhe barrel attaxhment. What were how to order that
Do you find any advantage to stacking the springs up on one end rather than spacing the springs out between each of the freezeplugs? Such as; spring-freezeplug-spring-freezeplug-spring-freezeplug etc...
this video will explain it all to you ruclips.net/video/8BLYF0oPD_M/видео.html
nah, that makes the cup wobble. stacked springs are compressed into a steel coil with the aluminum tube, nice and strong that way. Springs go closest to the barrel to provide airspace (head space). Your cleaning brush goes into this area, since the bristles need to turn before pulling back up barrel.
Id never clean my barrel with a can on it....and I dont think if done properly, with enough springs between plugs, the plugs would wiggle unacceptably. And it would still have springs in the "headspace" section, just not as many, which I think would do wonders for noise reduction. But, im no rocket surgeon with a bunch of money to waste on tax stamps for experiments on youtube 🤷♂️🤣
What the hell is it
@@joe735yup 👍
More videos plz!
This video is several years old. Updated products are on the website.
Which website sir
What caliber is it for?
Where do you bought it?
Looks awesome
Man that's awesome!Where can I find this product? I have a dirty gun that sends me subliminal messages I need to silence.
"The solvent" what should someone use to soke up "oil" ? I would put a bigger "drain" hole throw it to clean out.
Where can I get one?
I went on line and u r sold out when will they be back in stock
You can also find them on WISH & HOME. You can get both those apps on Google play store. Happy hunting.
Still available??
Perfect🤠👍
Why not put springs between the freeze plugs, making a larger "chamber" for the gasses to calm down in, and then tighten em all up with a slightly smaller "headspace" area?
What Gases? don't give it away ! it's a solvent filter !!! ha ha ha .
What is the current law regarding solvent traps? I keep reading different conflicting versions, some scary, some not. I've heard you need a form 1 for a solvent trap regardless if you want to modify it or actually use it to capture the solvent.
Some countries they're banned in the US they have to be registered with a fee payable.
What’s difference
@@yfelwulfso i have to pay 200 to clean my gun?
Cool
Im dying this is the best
WTF - F - F ??? I went to their website. Virtually everything is out of stock. The tube length shown in this video doesn't even appear on their web pages.
What's the web site
Why is there no link on where to buy ?
If you missed the link in the video, you have no business using a solvent trap...
"words Dolly. that what we're doing using words"
Hoffa
Where is the cup available
U can use freeze plugs too. Not nearly are thick though
Where can a cat purchase this solvent trap
EBAY
Step 1: you must be a dog
Aside from the bs comments, who here has used this with results?
@@GreenManLeather nice try ATF. 😝
99ss2759. Haha gotta Try harder then that nice try tho we do like to talk lol.
Is your company still in business because your website says you’re out of everything
Obviously an exotic series of al is worth mentioning when a job calls for a specialty alloy but why promote "T6"?
So how do these act as suppressors
Do you sell these filter kits ? If so how do I purchase
Shut up fed
How much were can I order this.
Dude please don’t
Are they still in business?
Nah
@@tamar17745 do you know who is?
ATF says I can spend time at club fed if my rifle comes within 50 feet of this
ATF HAS ENTERED THE CHAT
lol
Sounds like some atf fanboys in here...
FBI OPEN UP
Fuck the ATF and the rest of the alphabet boys
There should be no issues with this legally
As long as you don't complete your build, and wait until you make sure to pay your stamp and then build it and serialize, you should be fine. It's not illegal to build your own . Follow those rules and your legal to my understanding.
Aluminum..... If you would used steal and make them 6"-7" would sell many more
Out of business.
This design really makes little sense. I'll stick to k cups and 60 degree cones.
ya'll are an atf doorknock away
Fuck the ATF and the rest of the feds
Wait this isn't a suppressor
LMAO!
"Solvent trap" eh
I missed your address in Federal Prison.
Really?
trash can solvent trap. check out this really clean quality build ruclips.net/video/8BLYF0oPD_M/видео.html
5 Second Firearm.com
Just checked your site and all the kits are sold out. Any eta when they'll be in stock?
Nice try ATF.
Is this guy out of Federal Prison yet?
federal prison is fun
a 7 minute and 53 second tutorial on how to be under an extremely watchful eye of the aeronautics transportation federation.
😆🤣😂😉🤦
This has got to be the most janky "solvent trap" I've ever seen. Bunch of springs, all aluminum, flat baffles..."brought to you by 5 Second Firearms" which is appropriate because that's about how long it would take you to realize you made a huge mistake by buying this crap.
@@mathewmcdonald3657 *woosh*
yep, too complex for simple folk. We prove our stuff in the field. It would be nice to upload those vids. But some folks still believe in Santa Claus.......
Wouldn't the solivents just burst through the screens so would removing them be best
@@anthonydavis1545 wth are the springs for?
Did you know its illegal to publicly post how to manufacture a sawed off shotgun? You saw the barrel off. Thats illegal knowledge. Same with mufflers for your gun.
I can't see how these people pretend that this is a solvent trap. It is an obvious end run on suppressor classification. If you want a solvent trap, just slip an empty soda bottle over the end of your rifle. A Coleman fuel filter / funnel can be bought at any sporting goods store. Wala, filtered solvent to return to your container, as if anyone ever collected enough solvent and then returned it to the original container! LMAO. Consider this, $200 tax being constitutional when it comes to suppressors is a valid argument. But as the law stands now, a $200 tax is a molehill compared to the mountain the legal costs you will have when the ATF drops in to inspect your "Solvent Trap." I won't say, don't be stupid because stupid people do stupid things regardless of any warning.
some cleaning solvents will destroy a plastic bottle. And my missus gets really annoyed at dirty solvents dripping on the kitchen floor....
Hey John, shut the fuck up. Thanks.
-John
We know the terrorists use these to smuggle milk duds into a movi3 theater,shut up man,ur taxin my gig.
My God you guys keep playing the solvent trap cleaning devices nobody is fooled nobody cleans their guns like that just call it what it is. I don't mean to sound like a ass or be disrespectful I'm just saying show me one video of someone actually cleaning their guns that way
If you don't like don't watch jackass!
@@jasonvazquez1848 LMAO!!
@johnny jones that is hilarious considering there is nobody cleaning their weapons that way. And considering I break mine down and clean and oil each piece individually. And break them down and oil where it's needed when I have not used them in a while my weapons are cleaner than anyone's using that non existent method. I never have any kind of issues with mine. But to be fair show me a video of someone cleaning their weapons with that method and I will apologize and admit I was wrong. Otherwise they are unregistered suppressors and using a unfinished loophole to get around it. I don't care people can do whatever they want just call it what it is though
You have to clean your weapon this way if you want all the soap and water to come out efficiently and leave your weapon squeaky clean.
@@kschantz well honestly I have never had my weapons full of soap and water so there was nothing I couldn't get running a boresnake through. And because I clean them when I am done with them there is nothing caked on that is a problem to get out. I was taught that malfunctions can happen when powder sticks to oil so I don't feel like reducing my survival chances or being unsuccessful in the field. But I can't tell anyone what they should or shouldn't do it's not my life
I'm wondering how much time this guy got to ponder his next big thing or if he's actually ATF trying to "solvent" trap people? lol