Great video as always! I have 2 things to say. The Volvo's instructions error isnt the first time this has happened, believe me. For example, In the 42043 Mercedes Arocs, after the 4th stage of building where the crane is added, the page shows the front bumper of the truck already in place, but the assembly of this begins on the next page. Secondly, the Chiron's suspension. This is a very common misinterpretation, but the reason it sags is not because the shock absorbers are too weak, it's because the wishbones are held in place with friction pins. If these pins are to be replaced with frictionless pins, the suspension actually works properly. The shock absorbers are strong enough for the weight of the car, but not for the friction pins as well.
When I saw the thumbnail and read "sagging suspension" I just immediately looked at my Ducati Panigale where the forks are just bent outwards by like 4 studs from where it's supposed to be xD
I always thought that the two stickers sheets of the 4x4 crawler, it was something intentional, I say it is an all-terrain Rc it makes sense that some stickers are damaged and have to be replaced
Some people already pointed it out, but the problem of the Chiron are not the shock absorbers, but the way they are connected. If you were to replace the pins used with axles or frictionless pins, the suspension works perfectly. I found a video some months ago of a guy who showed that you just need to use frictionless pins on the front suspension instead of the blue ones used (really easy mod, even after assembly is complete), and that on the rear you could replace again the blue pins with frictionless ones and also a grey piece with a 5 long axle. A little bit trickier if done after assembly, but truly fixes the Bugatti
As a Maya Animator I would say the issue was with the rigging. Sometimes it can be quite a tricky task to properly rig the mechanic parts and if it is just a very short display scene, within CGI people will often go "Naaah... no one will notice anyways. Lets just do it in a fraction of time and budget and hope no one will make a Top 5 biggest Errors of LEGO Technic Video..."
You should add the Airbus (42145).. the back wheels can barely support the weight of the finished model, also the battery box is inaccessible once the model is made - tough luck if the batteries run out and you want to replace them.
I agree about the wheels, but not about the battery box. The battery box is still very easily accessible, since you can just open the battery cover from the bottom without disassembling anything
the bugatti chiron`s suspension that you mentioned as 'not working correctly due to weak shock obsorbers' was actually supposed to do this, the real life vehicle also has this kind of suspension, where there is a button inside the car pushes the suspension back to normal.
I own the Volvo front end loader. Watch the wiring. The wire for my steering servo got chewed up by gears or turning somehow. I ended up taking the whole thing apart and replacing the servo. Official Lego servo motors are not cheap. Someday I might take two of the gears for raising the bucket and replace them with clutch gears to stop the grinding since I sometimes forget to stop the motion. Also, I might swap out the IR parts that come with the set for CADA 2.4GHz parts for better range. I enjoy this set, but I wish the steering was variable instead of "All Or None". It's still fun though.
I agree with LEGO including 2 sticker sheets so, so much. It would barely cost them anything and would give you a mulligan and also really keep the cost of retired sticker sheets down on the secondary market.
Possibly, the first runs containd these accidetial stickers. It had the second revision with corrected drive shafts embrasement (already applied in 41999 too), so the stickers number was also revisited.
The 8002 Destroyer Droid's instruction was a mess; some of the rubber band was placed on the wrong place, the 3D models in the manual collide with each other, the original rubber bands were too weak, and the pre-amendement way to transform it was ineffective. It ended up with two different versions of amendement instructions just to make it work properly.
I wish the Volvo dump truck would work better in 3rd gear and not stop during shifting. I read somewhere in a comment that the older version of the software does not do the stopping before shifting. Eric Trax MOC designs might work better. I don't know yet.
the lego bugatti error is very annoying. i used a video to fix it, but it is broken again. i am working on adding a third shock absorber to the front suspension.
A RUclipsr names JLT works made several videos on fixing the Bugatti’s suspension issue, haven’t tried it out yet but it seems promising. Basically, LEGO used the wrong pins for the suspension. They used blue friction pins instead of yellowish white non friction pins. Two shock absorbers for each wheel should be more than enough. P.S. unrelated but do you happen to have fixes for squeaky shock absorbers?
This might be a little harsh, but I don't think double sticker sheets or instructions mistakes should be included in video... When you look on second hand market, most stickers are missing or destroyed on old sets, and as someone who recently had to buy stickers for the William F1, hell that's expensive! Instruction's mistakes are quite common in Lego, even more for the appearance of something before building it, but it's almost never big deal to build... Still interesting about the animations and the power puller trick thought XD
Hey Unbrickme, Balaz from Racing Brick calculated that a white Technic Defender was possible. Can you build one and show how it looks? That would be cool 😎
The first 1,000 people to use this link will get a 1 month free trial of Skillshare: skl.sh/unbrickme08211
2:30 it is to not have the orange hose thingy behind the battery box.
@@darthrevan6130 yeah but I lost that piece
@@Unbrickme yeah, a lot of those pieces are loosable. I know it, I have this behemot.
@@Unbrickme I had a spare hose
@@Unbrickme i don.t actually have a problem with the suspension of the chiron i don.t mind pulling it back up or pushing it down
“Despite LEGO quality control”
LEGO City fans: I’m sorry could you repeat that
LEGO Star Wars Fans: You guys have quality control?
Great video as always! I have 2 things to say. The Volvo's instructions error isnt the first time this has happened, believe me. For example, In the 42043 Mercedes Arocs, after the 4th stage of building where the crane is added, the page shows the front bumper of the truck already in place, but the assembly of this begins on the next page.
Secondly, the Chiron's suspension. This is a very common misinterpretation, but the reason it sags is not because the shock absorbers are too weak, it's because the wishbones are held in place with friction pins. If these pins are to be replaced with frictionless pins, the suspension actually works properly. The shock absorbers are strong enough for the weight of the car, but not for the friction pins as well.
When I saw the thumbnail and read "sagging suspension" I just immediately looked at my Ducati Panigale where the forks are just bent outwards by like 4 studs from where it's supposed to be xD
I always thought that the two stickers sheets of the 4x4 crawler, it was something intentional, I say it is an all-terrain Rc it makes sense that some stickers are damaged and have to be replaced
I don't know why you say "No pressure, no pressure", but it's cool that you put you're own catch phrase in your videos, like a calling card.
He says that to remind people that they don’t have to sub but that they can do it if they want 😊
Yep I say it as a catchphrase at this point
When I was building the 6x6 hauler I did get really confused, despite being quite an experienced builder, due to the engine being able to time travel
I haven't built mine yet. I'm glad you and the video gave a heads up
Some people already pointed it out, but the problem of the Chiron are not the shock absorbers, but the way they are connected. If you were to replace the pins used with axles or frictionless pins, the suspension works perfectly.
I found a video some months ago of a guy who showed that you just need to use frictionless pins on the front suspension instead of the blue ones used (really easy mod, even after assembly is complete), and that on the rear you could replace again the blue pins with frictionless ones and also a grey piece with a 5 long axle. A little bit trickier if done after assembly, but truly fixes the Bugatti
As a Maya Animator I would say the issue was with the rigging. Sometimes it can be quite a tricky task to properly rig the mechanic parts and if it is just a very short display scene, within CGI people will often go "Naaah... no one will notice anyways. Lets just do it in a fraction of time and budget and hope no one will make a Top 5 biggest Errors of LEGO Technic Video..."
Thanks for sharing your insight as an animator! I greatly appreciate it
You should add the Airbus (42145).. the back wheels can barely support the weight of the finished model, also the battery box is inaccessible once the model is made - tough luck if the batteries run out and you want to replace them.
I agree about the wheels, but not about the battery box. The battery box is still very easily accessible, since you can just open the battery cover from the bottom without disassembling anything
the bugatti chiron`s suspension that you mentioned as 'not working correctly due to weak shock obsorbers' was actually supposed to do this, the real life vehicle also has this kind of suspension, where there is a button inside the car pushes the suspension back to normal.
I own the Volvo front end loader. Watch the wiring. The wire for my steering servo got chewed up by gears or turning somehow. I ended up taking the whole thing apart and replacing the servo. Official Lego servo motors are not cheap. Someday I might take two of the gears for raising the bucket and replace them with clutch gears to stop the grinding since I sometimes forget to stop the motion. Also, I might swap out the IR parts that come with the set for CADA 2.4GHz parts for better range. I enjoy this set, but I wish the steering was variable instead of "All Or None". It's still fun though.
I agree with LEGO including 2 sticker sheets so, so much. It would barely cost them anything and would give you a mulligan and also really keep the cost of retired sticker sheets down on the secondary market.
I did notice this error while building the Volvo dump truck
So my Lego Technic 9398 Crawler did not contain two Sticker Sheets.
Sorry to hear that
Possibly, the first runs containd these accidetial stickers. It had the second revision with corrected drive shafts embrasement (already applied in 41999 too), so the stickers number was also revisited.
Your videos are absolutely amazing! I think that you should make videos about the rarest beams, axles and mudguards.
Thank you very much, and great ideas!!!
The 8002 Destroyer Droid's instruction was a mess; some of the rubber band was placed on the wrong place, the 3D models in the manual collide with each other, the original rubber bands were too weak, and the pre-amendement way to transform it was ineffective.
It ended up with two different versions of amendement instructions just to make it work properly.
You should have included the printing error in the Mercedes zetros instructions
Definitely, but this video was actually made before august 1st
What's the error in that one?
The 8043 is the most insuring
This channel deserves WAY more subscribers
Thank you so much!!! I greatly appreciate your support!
Hey what’s the name of the song you use for the number one spot?
Can you please do some older lego reviews like 8430,8520 and 8530
8868 review will coming soon
3:58 thats the pain i Got after building it
0:10 something about the way you say two just makes me laugh
:)
I wish the Volvo dump truck would work better in 3rd gear and not stop during shifting. I read somewhere in a comment that the older version of the software does not do the stopping before shifting. Eric Trax MOC designs might work better. I don't know yet.
the lego bugatti error is very annoying. i used a video to fix it, but it is broken again. i am working on adding a third shock absorber to the front suspension.
Im not sure why but i have the chiron set and the suspension works perfectly fine on it
What is the top 5 biggest Lego set of all time
A RUclipsr names JLT works made several videos on fixing the Bugatti’s suspension issue, haven’t tried it out yet but it seems promising. Basically, LEGO used the wrong pins for the suspension. They used blue friction pins instead of yellowish white non friction pins. Two shock absorbers for each wheel should be more than enough.
P.S. unrelated but do you happen to have fixes for squeaky shock absorbers?
This might be a little harsh, but I don't think double sticker sheets or instructions mistakes should be included in video... When you look on second hand market, most stickers are missing or destroyed on old sets, and as someone who recently had to buy stickers for the William F1, hell that's expensive! Instruction's mistakes are quite common in Lego, even more for the appearance of something before building it, but it's almost never big deal to build... Still interesting about the animations and the power puller trick thought XD
Hopefully a pneumatic backhoe loader will be released in the future.
Before i buy... anything wrong with the airport rescue vehcile?
No
Do the Flex System!!
4:43 bruh what is whith that bicep on the top image
Hey Unbrickme, Balaz from Racing Brick calculated that a white Technic Defender was possible. Can you build one and show how it looks? That would be cool 😎
3:30 Lego heard your call but i think they understood it wrong =:
Yeah I should have worded that better
Do yoy think Bugatti's suspension could be fixed by using harder shock absorbers? :0
Most likely
I’m getting a rc car for my birthday should I get 42095,42124,or 42109 please reply
Nice
Thank you I appreciate it
Отлично!!
ok
Hypercar*
Hi
hello there
ello
hello there
:)