Kraus T Bar Install and Setup | Stage 4 | Build Series | Part 7
HTML-код
- Опубликовано: 10 июн 2021
- Following my 2020 Harley Davidson Street Glide Special build series - in this video I install 8" KRAUS ISOLATED RISERS , part number UN-ISO-26-A.
A KRAUS T-REX PULL BACK PLATE, which is a must if you have a 2020 Harley-Davidson Street Glide Special. The part number for the KRAUS T-REX PULL BACK PLATE is ST-PB-01-A.
Along with that I installed three other parts to complete my setup, the first is the FM FLY MOTO STYLE BARS, part number UN-HB-005. The second is the ODI V-TWIN LOCK-ON HART-LUCK SIGNATURE FULL-WAFFLE GRIP SET, part number V31HTW-BH-H.
The last part is the KRAUS PRO-LINE PERCH HALF CLAMPS, part number HD-HC-01-A.
To purchase any of the parts:
8" KRAUS ISOLATED RISERS:
www.krausmotorco.com/collecti...
KRAUS T-REX PULL BACK PLATE:
www.krausmotorco.com/collecti...
FM FLY MOTO STYLE BARS: www.krausmotorco.com/collecti...
ODI V-TWIN LOCK-ON GRIP: www.krausmotorco.com/products...
KRAUS PRO-LINE PERCH HALF CLAMPS:
www.krausmotorco.com/products...
I hope you guys continue to follow along in this journey to building the baddest Harley Davidson Street Glide Special. In this motorcycle build series, I'm going to spare no expense and build the cleanest Street Glide Special in Central Florida. I'll be looking for your inputs on what you think looks best too.
Don't forget to SUBSCRIBE to get in on my weekly CASH giveaways!
Music:
Feel U (By Zan)
Games (By Zan)
#BuildSeries #HarleyDavidson #StreetGlide #Kraus #Tbars #FlyMotoBars #Baggers #PerformanceBaggers
Twitter: / michaelbertinii
Instagram: @MichaelBertini Авто/Мото
good on you for doing it yourself, dealer wanted to charge me 12 hours labor to do my bars and cables, did it myself in 4.5 and saved a ton of money. I love your bars. well done
Exactly! It's crazy how much they try to get you for. I'm glad you decided to do it yourself. Now all that extra money could buy more parts. 😅😉🤘🏼Thanks!
The new bar matches the looks of whole bike.
That bar set up is really nice. i still have 50+ videos in this playlist to watch and enjoying them all so far.
Thanks, Torch! I appreciate the love and support 😬🤘🏼
I just went and watched the first build video and the before and after comparison is crazy, the bike looks so much better now. The handle and all of the other parts that you replaced with black colored ones/more beautiful ones look amazing.
Thanks Kiesgz!
Getting better and better.
Since you eliminated the switch panel at the fork lock switch what did you do with your switches. Completely gone?
I have all the other switches. The only one that was removed was the one on the fork.
@@MichaelBertini gotcha
@@MOTOPILOT6 🤘🏼
Love watching as always.
I got the 8" pullback risers on my 14 Street Glide. I like them better than the straight 10" risers, easier on my shoulders and I can see the screen of my infotainment system. Good job, this is a job that you can do on your own. Done mine and my friend's setups for both our street glides. Definitely way better handling than apes.
I think about exactly this all the time. Sometimes I wish I got the pullbacks, because I'll get shoulder fatigue if I try to ride in a more relaxed, less involved position. The pullbacks might've been perfect for me. I'm still happy with mine, but I think I would've be happy with the setup you went with. 🤘🏼
As expected, nice video!🤘🏼
Absolutely amazing!
Thank you for generousity.😍
Always a pleasure to watch you Michael! Keep good! Stay Happy!
Thank you. You to Toniii! 😊
Looks stunning.👍🏼
The bike is always clean, love it.
Thanks Mr. Clean. 🤘🏼
Always clean.
Love the new look of bike.
Love the new look
Enjoyed watching this.
Love and support as always.🥰
Be blessed as always man!
VERY nice video, definitely subscribing. Piecing this all together currently, just with 10” risers. This video, paired with a quick rundown of how to remove the fairing, and this job is very self explanatory!
Welcome to the Bertini fam! Thanks for showing love and support. Also, thank you for the feedback. 🤘🏼
Looks amazing.
love your passion
Always here to support the channel.
Awesome! Love this ❤️
Love the outcome of the handle.
It came out super clean; I'm really happy with the turnout. 👍🏼
Can't wait for the real time riding outdoors video
Great video, I have this set up. Love the feel of the bike.
Thanks Frank Jay! It really does make a big difference and it's hard to explain it to someone who doesn't have it yet. Glad to hear you love it too. 🤘🏼
Love this!!
As expected, another nice content...
Great vid🔥
Love it.😍
Much love!😍
Amazing 🔥🔥🔥
Entering again.🤘🏼
Hi, what was the overall ride for the setup. I know the risers are 8” but what were the mount and the bars in addition? I missed it if you said how tall you are. Great video! Thanks
Two thumbs up for this nice content.👍🏼👍🏼
Much love and support always.😊❤️
Smooth installation!
Yeah the installation was super smooth and easy for a DIY'er if they wanted to do it themselves. 👍🏼
Full support.💪🏼
Hi...what was your previous bar? Was it streetwitch?
Really love the black.
Goodluck on the process Michael!🔥
Thanks! 🤘🏼
Always support from philippines 🇵🇭
Absolutely wow 😊.
Job well done! 😊
Always support here!💪🏼
Awesome video including the torque specs
Thanks David! I appreciate the love and support. 🤘🏼
Awesome. The bike is cool
So cool bike.. love this kind of video.
Hey bro great info! I read through all your comments and have a question. Why do you regret NOT going with the Pull back risers? I called Kraus to order my set and they suggested I go with either a pull back riser or a pull back plate but not both. They said using both it might bring the bars too close and give you a cramp feeling. I am same height as you and just want to make sure I've ordered the right set up. Do you recommend using both the Raptor and the 8" Pull back risers?
Appreciate the help!
The T-Bar looks pretty good!
Yeah in my opinion this is the best t-bar setup money can buy. 🤘🏼
Great thanks for showing and talking through install
Thanks for the love and support! ❤️🤘🏼
Love the bike.
What a lucky ride 🏍️
So nice!
Congrats on your success!🎉
Thank you 😊
Take care always!
Love and support ❤️
So much Love ❤❤❤❤
I have the 10 inch on my 2020 SGS and what I will say is if all you are doing is going straight on the freeway then stock style bars are fine. But who wants to ride like that ? Get up in the canyons and go thru the turns and these bars handle so much better it's incredible.
You nailed it! 🍻
A very helpful and informative video
Awesome!!😎
That was dope
Outcome so nice.
How did you deactivate the ignition switch? Awesome built man! Thx!
Looks good.
That's so nice of you
Bike is 🔥🔥🔥
Awesome video! This really help me!
That's awesome! Thanks for the feedback. 👍🏼
@@MichaelBertini thank u man! This vid really helped me make my choice on what i am going with now. T bars it is .
@@beck1514 Let them know that Michael Bertini from RUclips sent you and they'll hook you up.
might have to try to install this myself. Local dealer wanting to charge like $1300 to install. Looks like the hardest part is running the cables in/out the bars.
Yeah, do it yourself. Hardest part is the cables.
Just curious. I have a ‘18 street glide,
The metal bushing do not fit from the bottom of the triple trees? Did your fit right in? I removed the factory washer, rubber style and trying to fit the large metal busing through the bottom up and it doesn’t seem to fit ?
Thank you,
Hi Robert, mine fit perfectly with ease. 👍🏼
Thank you for this!
Nice job!😁
Looks good
Thanks Glenn!
Love and support.
Amazing 🔥 you doing good
Awesome.😎
Now that you have added the T bars, and can see the top gauges. what is your viability on the infotainment screen?
So I removed the whole sound system off of the bike, see here: ruclips.net/video/Xbnp3AVV1is/видео.html
I wasn't able to see it very well with the 8.5" risers, unfortunately. But, depending on your height you might be able to see it ok. I'm 6' 0" tall.
I was wondering what your Hieght is as I don't think you mentioned it and was wanting to know if I went with 10'' straight risers and the same bars you have at 5'7'' would I be able to see the gauges OK?
I'm 6' 0" and I went with the 8" risers fine. My only regret is not getting the pullback version of the risers.
In terms of you being able to see the gauges at 5' 7" with 8" risers, I would say yes, but I'm no expert. I would call up Kraus and ask them.
They are much more knowledgeable than me on the subject. 👍🏼
Supporting always from 🇵🇭❤️
New handle bar is looks good
Dawn dish soap worked good getting wire out of the bars
That's good to know, thanks! 😬🤘🏼
Are the grips fly by wire if so where did u get them I can only find ones for the cable
Hey Braden, on all my videos I put links in the description box where you can buy the parts I've installed in the videos. Here is the link for the ODI V-Twin Lock-On grips: www.krausmotorco.com/products/v-twin-lock-on-grip-set
Thanks for all the love and support of my content and channel. 🤘🏼
Amazing.
The bike is dope. Wish to have it too
Amazing.. 😉
Nice video! Did you have to get that centre hole on your bars cut out or did they come that way? I only ask because I'm halfway through my bars and i just noticed they don't have one.
Thanks! My bars came with that cut out in them. 👍🏼
Thanks for sharing 👍
I may have missed it but did you use the stock cables? I'm looking into this exact setup.
Hey Jesse 🤘🏼 yeah I used the stock cables. Let me know what you think of the setup after you install it. I've been loving it. 👍🏼
So nice..😱
Great video, how much visibility of the screen do you lose with this setup? Thinking on doing the same set up but I use my GPS with apple carplay very often for long trips, that's the only thing holding me back.
Thanks Cesar! 🤘🏼 You do lose a bit of visibility of the screen... about 60%. But you could get about 80% visibility if you sit up taller for second.
I think the handling benefits made it worth it for me. Even if I lost some visibility of the screen. The performance gains are worth it.
So cool
what is it exactly called when taking off the Fork lock because my Harley dealership has NO IDEA what I am asking them to do??? thanks
Glenn, it's a "keyless lock" flash. I believe that's what they told me.
Early notifs 🔥
where do you set "acc switch" on old dash if bike have fan, auxiliary lights ????
Not sure I'm following. Would you mind elaborating?
Nice!
Great video. Do you think you had enough cable length left to fit 10" risers? I am about to install mine so this was super helpful!
Thanks! 🤘🏼you might be stretching it a bit, but it should be enough cable. Letting me know what you think about yours after you install them. I've been really happy with my setup.
Better late than never!🤘🏼
This is nice