I really don’t like the look of hiding the navigation screen whether I use it or not I don’t want it hidden. There is a simple alternative to the Krause set up and it is the FXR motorwitch bars they basically mimic the T bar set up they are 30 in wide and look great plus you don’t have to chop up your bike you can see your gauges and your navigation screen without relocating them.
I run the tall motorwitch bars. Love the look, feel, and the fact that I kept everything in original position without even having to extend my cables / wires. Way cheaper obviously too.
You don’t have any wires coming over the front of your triple tree do you? Do you run them through somewhere? Getting these installed at local Harley dealership and they currently have them over the top and I don’t like the look. Thanks.
WILL THESE FIT ON A 2008 HERITAGE SOFTAIL? YOUR 3 1/2 HOURS AWAY AND I GET MY BIKE BY MARCH 2023, HOW LONG DOES IT TAKE AND HOW MUCH, PLEASE, THANK YOU!
Ride a stock 2017 Road Glide Ultra.On long rides I get a burning knot at bottom of neck. Would you recommend those Kraus Bar setup or just go with taller bars I’m 6’1”
Vivid Black I would do the Kraus bars if you like the look. The white bike in the video is owned by a customer that around 6’2” - 6’3” and he loves the setup. Call the shop and ask for Aaron or me Jamie and we’ll go over the options 615-274-4170
Would a 10" riser instead of a 12" be comfortable for a similar sized person? I'm 6'3" looking at 10" riser w/1"1/2 pullback mounted to the wolf one triple tree? Do u think that's a comfortable setup or would I need more rise/pullback. Thanks for any feedback!
Would love to run the Kraus setup in my streetglide build. You guys run their setup with a bar I can keep my OEM HD heated grips? Their site says no ho on heated grips. Daily rider and definitely want to keep the heated grips for early commutes.
@@MoonshineHarley thank you for the quick reply. I’m 5’10 looking for chest height and don’t wanna be reaching forward. Laidlaw is pretty tall and I don’t think he’s complained about it being to close to him with the TRex plate. It would add another 2” in height though. This is tough without getting to sit on an actual bike.
Jason Williams depends on the setup. A good range would be $1,300 -$2,200 depending on bike & desired setup. Call the shop and ask for Jamie or Aaron 615-274-4170
Stock cables will do 12.5 total inches, so 10" riser with the fly bars. Stock wiring gets extended on almost every bar we do but the cost for the wire extensions are cheap.
Hi guys I'm searching the internet everywhere for answers but can't seem to find anything. I've installed the wolf top clamp on my 15 RGS I've removed fork lock and ignition switch and put everything back together but without the switch I'm not sure how I get my bike to switch to run position. I did see a forum saying someone took their bike to the dealer to have it flashed to bypass ignition switch and just fire up with the fob present (Like CVO). Is this what I need to do to run the Wolf top clamp without the ignition switch?
James Vance 7 hours with stock cables and 9 hours with cables. When we do the install we spend extra time running all the wires around the neck and into the frame so the install looks super clean.
@@MoonshineHarley wish you guys were my local dealer. I’m in New York. When I ask for pricing and the kraus set up the dealers here sound like they don’t know what they are talking about. Smh
It’s not just about the radio guys, its also about the navigation system? Yep u can set your mobile phone up, but isn’t thats why we pay the big bucks?
Can you do this to a 2022 Indian FTR Carbon? I’d love to get the bars up and back I’m also going to start bugging bmc/Corbin to build a taller widowmaker seat with a QD Large backrest if I do the Dub Performance 240rear and glass side overs no contrast all black only thing I would truthfully have to design would be a Heinrich/Paris-Dakar style tank sudo side covers that has a larger range I’m a disabled Veteran Father of four dreams are all I get for now but if I’m dreaming I want a bike that reminds me of my youth and the shit I wanted then lol (Someone just put my name on it) 2022 Indian FTR Carbon Bmc/Corbin Widowmaker seat with QD Backrest Isolation pullback riser for extra deep center pro taper mx bars Toce undertail exhaust Undertail plate kit Moto-X Front Fender Rear mud guard RWD TXR Fairing Kit Waterproof gps/jukebox Then paint the whole thing the darkest black possible and sugar coat it with lane marking crystals Throw some endurance adventure driver and passenger wide pegs/mini floorBoards amber led fog/flood/hazard bars front and rear A phone Mount I can’t afford And a rifle scabbard for a Ruger American Ranch rifle with a scope Dream bike now to get competitive brands to function on one project and still not be able to afford it
Steering lock is pointless, any human over the age of 14 can break a steering like by pulling in it anyways. If you want to lock your bike, get a disc lock or a bike U lock and put it through the arm holes of the rear sprocket.
I really don’t like the look of hiding the navigation screen whether I use it or not I don’t want it hidden. There is a simple alternative to the Krause set up and it is the FXR motorwitch bars they basically mimic the T bar set up they are 30 in wide and look great plus you don’t have to chop up your bike you can see your gauges and your navigation screen without relocating them.
I run the tall motorwitch bars. Love the look, feel, and the fact that I kept everything in original position without even having to extend my cables / wires. Way cheaper obviously too.
Hey what about the street glide
So many things I should do to my Road Glide. Krauss Bars being the next thing for sure. Bye Bye money
But you’ll love them!!!!!!!!!!!!!!!!
I’m in Toledo Ohio and I’m gonna ride down to y’all this spring to do these bars. No other Harley is like y’all 💪🏻💪🏻
Thank you and Awesome! Make sure you call us and get everything line up before you make the trip.
615-274-4170
Horsepower@moonshineharley.com
Cheers from NE OH
what height set up are you running on your bike? Looks very confortable regardless of the visibility on the gps. How tall are your as well ?
is this sets apply to CVO Road glide 2013 model
Will having a local Harley shop around me mess up my dyno tune you guys did having them flash the ecm to get rid of handle bar lock for these bars.?
Nice video, thanks 😊
I don't normally like Baggers, but these look awesome.
Thanks Slayer!
You don’t have any wires coming over the front of your triple tree do you? Do you run them through somewhere? Getting these installed at local Harley dealership and they currently have them over the top and I don’t like the look. Thanks.
what's the best set up for a Street Glide special so that you can see at least 3/4 of the stereo ?
If you eliminate the ignition and only run the key fob can you still start the bike with the pin code if you lose your key fob??
Correct.
WILL THESE FIT ON A 2008 HERITAGE SOFTAIL? YOUR 3 1/2 HOURS AWAY AND I GET MY BIKE BY MARCH 2023, HOW LONG DOES IT TAKE AND HOW MUCH, PLEASE, THANK YOU!
What kind of bars can I put on my street glide cvo
Ride a stock 2017 Road Glide Ultra.On long rides I get a burning knot at bottom of neck. Would you recommend those Kraus Bar setup or just go with taller bars I’m 6’1”
Vivid Black I would do the Kraus bars if you like the look. The white bike in the video is owned by a customer that around 6’2” - 6’3” and he loves the setup. Call the shop and ask for Aaron or me Jamie and we’ll go over the options 615-274-4170
Would a 10" riser instead of a 12" be comfortable for a similar sized person? I'm 6'3" looking at 10" riser w/1"1/2 pullback mounted to the wolf one triple tree? Do u think that's a comfortable setup or would I need more rise/pullback. Thanks for any feedback!
Would love to run the Kraus setup in my streetglide build. You guys run their setup with a bar I can keep my OEM HD heated grips? Their site says no ho on heated grips. Daily rider and definitely want to keep the heated grips for early commutes.
Does the wolf 1 top plate bring the bars back at all or do you still need the raptor or trex if you want to bring the kickback bars back even more?
You’ll need to pair the kickback with a Raptor or Trex if you need more pullback. The Wolf One top plate uses the factory riser mount location.
@@MoonshineHarley thank you for the quick reply. I’m 5’10 looking for chest height and don’t wanna be reaching forward. Laidlaw is pretty tall and I don’t think he’s complained about it being to close to him with the TRex plate. It would add another 2” in height though. This is tough without getting to sit on an actual bike.
how much is this full set up??, with the 10'' kickbacks, gage relocation and the ohlins suspension front and back installed ?
Do you cut the back of the gauge bezel when using Dakota digital gauges?
Full cost of setup and install?
Jason Williams depends on the setup. A good range would be $1,300 -$2,200 depending on bike & desired setup. Call the shop and ask for Jamie or Aaron 615-274-4170
Let's get this party started!
Hell yeah!
For clarification, does the stock ignition remain fully functional with the iso riser without the t rex?
It would be converted over to the CVO programming. With that setup you would just use the key fob to enable the ignition.
I definitely want you guys to build me a bike for sure .
Hell Yeah! Contact us when you are getting close.
I most definitely will . I like what you guys do .
What brand bushings do u recommend?
The Harley-Davidson poly bushings are the ones we run.
Do y’all keep these in stock ?
Ricky Bobby Yes, usually.
Will the 2020 lowrider s gauges fit inside the Kraus gauge bezel?
No. Rg gauges are not round
What’s the highest you can go with these bars using stock wiring and cables.
Stock cables will do 12.5 total inches, so 10" riser with the fly bars. Stock wiring gets extended on almost every bar we do but the cost for the wire extensions are cheap.
Hi guys I'm searching the internet everywhere for answers but can't seem to find anything. I've installed the wolf top clamp on my 15 RGS I've removed fork lock and ignition switch and put everything back together but without the switch I'm not sure how I get my bike to switch to run position. I did see a forum saying someone took their bike to the dealer to have it flashed to bypass ignition switch and just fire up with the fob present (Like CVO). Is this what I need to do to run the Wolf top clamp without the ignition switch?
Yes, If you are removing the ignition switch.
Hey, how did you install the top clamp? Did you have to remove the forks?
Mike - You're a riot!
Awesome video! Best Dealership and Motor Gurus ANYWHERE ! Got my 2016 road glide ultra from you guys a couple weeks ago and loving it.
Thank You! We greatly appreciate the business.
How long does an install take for the full krauss setup.
Are you referring to the inverted fork and brakes as the full Kraus setup?
Moonshine Harley was referring to the riser and bars with the wolf one top clamp.
James Vance 7 hours with stock cables and 9 hours with cables. When we do the install we spend extra time running all the wires around the neck and into the frame so the install looks super clean.
@@MoonshineHarley wish you guys were my local dealer. I’m in New York. When I ask for pricing and the kraus set up the dealers here sound like they don’t know what they are talking about. Smh
Love your pro content, style, and camera work! Just started a channel of my own, so taking cues from y'all's "bar". Subbed ;)
Thank you and...you’ll crush it!
@@MoonshineHarley Guys, I appreciate it!!!
It’s not just about the radio guys, its also about the navigation system? Yep u can set your mobile phone up, but isn’t thats why we pay the big bucks?
John Davies We have options for this setup and still be able to see and use the Nav/radio!!!
@@MoonshineHarley What’s the option?
Can you do this to a 2022 Indian FTR Carbon? I’d love to get the bars up and back I’m also going to start bugging bmc/Corbin to build a taller widowmaker seat with a QD Large backrest if I do the Dub Performance 240rear and glass side overs no contrast all black only thing I would truthfully have to design would be a Heinrich/Paris-Dakar style tank sudo side covers that has a larger range I’m a disabled Veteran Father of four dreams are all I get for now but if I’m dreaming I want a bike that reminds me of my youth and the shit I wanted then lol
(Someone just put my name on it)
2022 Indian FTR Carbon
Bmc/Corbin Widowmaker seat with QD Backrest
Isolation pullback riser for extra deep center pro taper mx bars
Toce undertail exhaust
Undertail plate kit
Moto-X Front Fender
Rear mud guard
RWD TXR Fairing Kit
Waterproof gps/jukebox
Then paint the whole thing the darkest black possible and sugar coat it with lane marking crystals
Throw some endurance adventure driver and passenger wide pegs/mini floorBoards
amber led fog/flood/hazard bars front and rear
A phone Mount I can’t afford
And a rifle scabbard for a Ruger American Ranch rifle with a scope
Dream bike now to get competitive brands to function on one project and still not be able to afford it
I want this setup but I don’t trust my local dealer to do it.
I have it and its a pain to do but worth it. where do you live? i can help you get a good shop to help you
Steering lock is pointless, any human over the age of 14 can break a steering like by pulling in it anyways.
If you want to lock your bike, get a disc lock or a bike U lock and put it through the arm holes of the rear sprocket.
Don't run in to that with bat wing
screw the radio it is gps for me. i could care less about the music or radio.
I'm sorry 😞, but not seeing the benefits of this very expensive setup. Outside of throwing money 💰 away!
🇺🇸🇺🇸🇺🇸