A little bit overpowered. Flashlights everywhere, PCB everywhere (do you need 3 PCB for the remote? Why not 3D printing a case?), but what I don't understand is why there are microcontrollers everywhere. Why all of this electronic? Why are you using relay? You showed at least 15 relays in your video. Why are you using a cable to power the robot while we can see batteries and what it seems to be a power regulator (fuse, capacitor, transistor)? How can you program all of your ships if they are already soldered to the PCB? Are they logic gates? Why are you using an Arduino Uno? (0:24)? Maybe a Mega for all this I/O? If you're using a camera, why not using a raspberri Pi?
Did that robot loaded with sensors and really cool wheels and all that gobbledygook just run into a wall? Seriously? How could you not program that distance a bit better?
nice robot, but why too many led? to make it cool? try something new dude!, and how about "multi functional?", i can't see any function on this robot!! maybe you can add some cool module, like flame sensor/pir/ldr or etc? maybe making project like me, i have idea to make my robot wake up after light cut and give us some light or adding alarm for flame or gas detection, and i have project to controlling my robot via web server anywhere, so i can see every room on my home when im travelling, only with the ip cam+ ethernet shield :D that's multi functional!!! sry but your robot is not a multi functional, someone comment "it's cool robot" because they don't know anything about arduino. i say "nice robot" because i like the wheels :v
i'll upload it if done, i need some component to make my robot ready. It simple, i can control my robot from anywhere with internet connection, not cheap, but i will keep buying. Till now, my robot can only detecting temerature, detecting hearth pulse, auto on 2x5v led when light out and the light+ gas detector with alarm(this all module is cheap dude, try it and your robot will be a multi functional stuff). I reassemble my robot for IoT project, wait till im done ok? sry if my english so bad
Cara Amar what Cara is trying to say is that he doesn’t actually have a bot that does all these things, and is just simply spouting out electronics buzzwords.
Man with all them goddamn electronics crowding the circuit boards I'd expect that thing to go fetch the morning paper, make a martini, and give the dog a bath...and you mean to show all it can do is roll around and avoid bumps and collisions and flash an led or two? What a piece of junk.
Hello my friend, how are you? Your job is fantastic. Impressive! Could you send me the step-by-step? Do you pass me the list of electronic components and the assembly of the PCB? The quantity and the measure of each? I would like to do this work for a science fair. Can you help me? My friend please.
I am certainly proud of you guys for being able to complete your design, however, I feel this is a grossly over-designed robot that will waste a tonne of power. That same automaton could've be made smaller and more power efficient with fewer IC's (waste heat): a single FPGA, coupled with a few level shifters could be used if low level logic was required for your assignment.
Should put the circuit diagram online and let an older person figure out how to subtract several circuit pathways. I would not mind working with you in the future. Send me an email for a reminder.
Hey Robo tronics your ptojects are just amazing. pls can u make a 6 in one car, which has 6 modes. m1- remote controlled ,m2- ir controlled, m3- obstackle avoiding robot ,m4- distance sensing robot, m5- hoverboat ( i mean a boat) which can run on water, and if u can m6- drone. Everything is controlled wirelessly (with nrf24l02 radio module) .The remote shiuld have a lcd which shows the mode number and the mode name ( i mean like m1- remote control , m2- ir control). It should have a push button to change the mode. It should be light weight. Everything should be made of geared dc motors. It should be based on arduino. The remote should contain two joysticks to move the robot. Pls it would be a great help for me if u could do this. Thank you
Nice project. I like those messages on the remote controller ("I see my master left you in charge") :) Apply for a job at Boston Dynamics or NASA asap.
Hey man do you think you could make a list of all the parts down to every last electronic component ? I see you have some relays in the remote what are they for ?
Dude that is awesome!!!! You are a genius!!! Please tell me what kind of communication did u use to send the data from the remote to the robot? You are a freaking GENIUS!!! Awesome!!
I have only one problem.....How did you send so much data over bluetooth and then read it? like how do you send 2 pot values and then separate them? what i am trying to say is that how do you control 2 servos with 2 pots over bluetooth? like i don't know....if you could help me that will be great! thank you! you the best
oks buddy keep it up.... but one thing i will like to say don't make it to glitch rather its awesome 👏. and as you said it's multifunctional still in this video i haven't seen any useful functions... if am i able let me know what will be the functions 👍🏼👍🏼
god too much complicated circuit design. my philosophy is make the circuit board small even though it's handmade. build your own PCB, using universal PCFB (printed circuit fuckedup board) is just going to make u realize later oh it's looks just like me [ugly]
You just took overcomplication to a whole new level...
A little bit overpowered.
Flashlights everywhere, PCB everywhere (do you need 3 PCB for the remote? Why not 3D printing a case?), but what I don't understand is why there are microcontrollers everywhere.
Why all of this electronic? Why are you using relay? You showed at least 15 relays in your video.
Why are you using a cable to power the robot while we can see batteries and what it seems to be a power regulator (fuse, capacitor, transistor)?
How can you program all of your ships if they are already soldered to the PCB? Are they logic gates?
Why are you using an Arduino Uno? (0:24)? Maybe a Mega for all this I/O?
If you're using a camera, why not using a raspberri Pi?
Alex Nitub your Comment is very logical
Bling. It's only for decoration.
Those relay, and other microC might be just gates, cuz he has a lot of LED, but I don't really know what the Us sensor did
I think you didn't make fully use of the Mecanum wheel
so the only one function is a lot of blinking leds? its not very difficult to do such robot. because there is no logic in its movements
check out the first generation: ruclips.net/video/jD-FT0QLwy4/видео.html and know that the second gen (ongoing project) will be significantly better
LOL I WAS WAITING FOR THOSE ""MULTI FUNCTIONS"" BUT THE VIDEO ENDED AS IT IS
magnometer
looks like a 10 years nasa project
Did that robot loaded with sensors and really cool wheels and all that gobbledygook just run into a wall? Seriously? How could you not program that distance a bit better?
this consists wirelessly operated designed and circuits, then why this is connected to wire..
😆😆😆😆😆
external power supply for testing purposes, its an on-going project .no yet finished
When you have a lot of Kits but you wanna use them all in the same time
that's me
nice robot, but why too many led? to make it cool? try something new dude!, and how about "multi functional?", i can't see any function on this robot!! maybe you can add some cool module, like flame sensor/pir/ldr or etc? maybe making project like me, i have idea to make my robot wake up after light cut and give us some light or adding alarm for flame or gas detection, and i have project to controlling my robot via web server anywhere, so i can see every room on my home when im travelling, only with the ip cam+ ethernet shield :D that's multi functional!!! sry but your robot is not a multi functional, someone comment "it's cool robot" because they don't know anything about arduino. i say "nice robot" because i like the wheels :v
Cara Amar OK, send me a link to ur own to ur own project
i'll upload it if done, i need some component to make my robot ready. It simple, i can control my robot from anywhere with internet connection, not cheap, but i will keep buying. Till now, my robot can only detecting temerature, detecting hearth pulse, auto on 2x5v led when light out and the light+ gas detector with alarm(this all module is cheap dude, try it and your robot will be a multi functional stuff). I reassemble my robot for IoT project, wait till im done ok? sry if my english so bad
just apreciate it anything he do dude, why so many judge its like ur robot r better?
Cara Amar what Cara is trying to say is that he doesn’t actually have a bot that does all these things, and is just simply spouting out electronics buzzwords.
dat music tho :(
Nice work
Client : How much microcontroller you use for your project?
This guy: yes
what is the function?
sry, but my robot still better then this :(
How about make it wireless? You can use a bluetooth or wifi shield. Congrats great project.
Man with all them goddamn electronics crowding the circuit boards I'd expect that thing to go fetch the morning paper, make a martini, and give the dog a bath...and you mean to show all it can do is roll around and avoid bumps and collisions and flash an led or two?
What a piece of junk.
mk
Good job! Song name 00:00?
Congratulation, it was hard job! The program will be under development if are ready the hardware..May you have a nice day at work!
Can you put that inside the rocket and build real rocket to Mars ?
why not. if I get paid to do so
thats impossible
I seriously cannot see any point of this robot with such complicated build.
Esta bueno el robot! pero ahí tenés mas que un arduino jeje. Muy bueno. Saludos!
Nice work!!!! Really impressive!
keep up bro do not stop keep uploading
Hello my friend, how are you? Your job is fantastic. Impressive! Could you send me the step-by-step? Do you pass me the list of electronic components and the assembly of the PCB? The quantity and the measure of each? I would like to do this work for a science fair. Can you help me? My friend please.
music name plz
a robot on wheels should be WIRELESS! you're dissapointing!
I am certainly proud of you guys for being able to complete your design, however, I feel this is a grossly over-designed robot that will waste a tonne of power. That same automaton could've be made smaller and more power efficient with fewer IC's (waste heat): a single FPGA, coupled with a few level shifters could be used if low level logic was required for your assignment.
Should put the circuit diagram online and let an older person figure out how to subtract several circuit pathways. I would not mind working with you in the future. Send me an email for a reminder.
Hey Robo tronics your ptojects are just amazing. pls can u make a 6 in one car, which has 6 modes. m1- remote controlled ,m2- ir controlled, m3- obstackle avoiding robot ,m4- distance sensing robot, m5- hoverboat ( i mean a boat) which can run on water, and if u can m6- drone. Everything is controlled wirelessly (with nrf24l02 radio module) .The remote shiuld have a lcd which shows the mode number and the mode name ( i mean like m1- remote control , m2- ir control).
It should have a push button to change the mode. It should be light weight. Everything should be made of geared dc motors. It should be based on arduino. The remote should contain two joysticks to move the robot. Pls it would be a great help for me if u could do this. Thank you
looks cool and looks like a 'Scorpian'. now since the mechanical. motions are fine, you can make it a autonomous bot with machine learning
i salute you
salute to you
Parabéns adorei o seu trabalho!
very nice... you can give me any robot project with arduino please ?
What is target!!!! This robot is very big.Not effective
remote control is not compatible with playstation players...
WTH big board with big DIP microschemes ???
Nice project. I like those messages on the remote controller ("I see my master left you in charge") :) Apply for a job at Boston Dynamics or NASA asap.
Where multi functional work? Why you make it critical? //
Килограмм говна напихали. Один STM32 заменил бы все барахло.
Damm you make too much complicated circuits
i can see every thing but there is a missing thing yes it is the robot hhh
Music is irritating
Otherwise it's ok
Congrats
How to code for the different modes
The music is just awful.
hi i am doing my college project . i made my project. but i dont know how to code the arduino can you help me please
DarkVally92 that's three words. 😆
What material do you use
i think you should make a video on how you build that controller. :D
Febulous
Thats amazing
please provides me the details like number of servo motors sensors etc
swati mohanty 4 motors and 7 servo motors
Идея нормальная , но очень много лишнего
нечто нелепое и безобразное...
Nice :)
AWESOME!
Hey man do you think you could make a list of all the parts down to every last electronic component ? I see you have some relays in the remote what are they for ?
joe bell yeah, everything was documented.
relay for switching the radio transceiver but has been upgraded now
Dude that is awesome!!!! You are a genius!!! Please tell me what kind of communication did u use to send the data from the remote to the robot? You are a freaking GENIUS!!! Awesome!!
Alexandru Goman radio transmitter, parallel communication at first but its been upgraded now to Bluetooth, radio and infrared using UART, spi, and pwm
I have only one problem.....How did you send so much data over bluetooth and then read it? like how do you send 2 pot values and then separate them? what i am trying to say is that how do you control 2 servos with 2 pots over bluetooth? like i don't know....if you could help me that will be great! thank you! you the best
Alexandru Goman send it as a string/array with a packet header
Ooooooh! That makes a lot of sense now! hahaha thank you!!!
i want to try to make my first robot soon, got any tips?
see it through
DON'T USE PI
awesome
oks buddy keep it up....
but one thing i will like to say don't make it to glitch rather its awesome 👏.
and as you said it's multifunctional still in this video i haven't seen any useful functions...
if am i able let me know what will be the functions
👍🏼👍🏼
Tejas Jadhav its a work in progress, subscribe for update
I was wondering what your doing nowadays, have you moved on from robotics?
it looks like the turtle from an anime?! and it looks overweight, needa get buff up on mechanical parts as well
god too much complicated circuit design. my philosophy is make the circuit board small even though it's handmade. build your own PCB, using universal PCFB (printed circuit fuckedup board) is just going to make u realize later oh it's looks just like me [ugly]
whats about its function???
How to make a remote controller(3:00) like that?
how much did it cost you
What do you call this type of wheels?
Amitai Medan Mecanum
huh......all u guys are just jealous