Nice. Most welcome. You will love the wheel. It is the best value at this price range for sure. Enjoy the build. I’ll be streaming another build here in a couple weeks or possibly sooner.
Wondering what height of wheel spacer height did you use? I am currently buying the parts to build mine and use the same type of quick release as yours. The 51mm mentioned in the guide seem quite excessive as my current wheel uses a 20mm spacer.
Hey mate. Glad you are going to be building yours. So you have a few options. The spacer I went with I had lying around was a 15mm spacer from Turn Racing that I had purchased w/ their button plate. If you have a 3D printer you can create one as well, 15 to 20mm would do perfectly fine, if not you can reach out to my sponsor Matt @ SimulationRUs on Etsy and he can create one for you along with any prints you may need for the wheel.
Great video series Ray! If you mentioned this I apologize, The parts you had printed, was that necessary because they aren't included or you just wanted different colors?
Hey Todd. Thanks man. You will have to print quite a few parts. They send you the BOM file and what prints you need. Than you will have to get some printed because Pokornyi does not supply it all. Using the directions than you would decide on what material you want.
Hi Ray, just started my journey with building this wheel and was curious about getting the aluminum Main Enclosure. Could I ask if I could use the same files to order it ? You mentioned it being in development in your video.
You would need to get some modification done to the file to get it printed in aluminum. I am not 100% sure but when I asked they said they are looking into giving the option for an aluminum enclosure. He was pretty sure it may be an option. However, not sure when. In order to do it on your own, modifying the current file would likely take a lot of work. I will reach out again and see if it is likely. Also MJF is an option as well as it is much harder than FDM.
Thx for your content. I just got the files today and will get the stuff soon hopefully. best regards from germany
Nice. Most welcome. You will love the wheel. It is the best value at this price range for sure. Enjoy the build. I’ll be streaming another build here in a couple weeks or possibly sooner.
Good stuff brother 👏🏾 appreciate all the tips.
Thx. Hope it helps.
Wondering what height of wheel spacer height did you use? I am currently buying the parts to build mine and use the same type of quick release as yours. The 51mm mentioned in the guide seem quite excessive as my current wheel uses a 20mm spacer.
Hey mate. Glad you are going to be building yours. So you have a few options. The spacer I went with I had lying around was a 15mm spacer from Turn Racing that I had purchased w/ their button plate. If you have a 3D printer you can create one as well, 15 to 20mm would do perfectly fine, if not you can reach out to my sponsor Matt @ SimulationRUs on Etsy and he can create one for you along with any prints you may need for the wheel.
Great video Ray. I can’t wait to build mine
Crazy how many people have ordered after my video. Super cool
The maybe PE should give you a discount code as well. Also I was a little lucky I got some discount due to the black Friday
Nice. That is super cool. Pokornyi has been cool. I cannot wait to build the Rally wheel. Going to get the plans here soon.
Great video series Ray! If you mentioned this I apologize, The parts you had printed, was that necessary because they aren't included or you just wanted different colors?
Hey Todd. Thanks man. You will have to print quite a few parts. They send you the BOM file and what prints you need. Than you will have to get some printed because Pokornyi does not supply it all. Using the directions than you would decide on what material you want.
Hi Ray, just started my journey with building this wheel and was curious about getting the aluminum Main Enclosure. Could I ask if I could use the same files to order it ? You mentioned it being in development in your video.
You would need to get some modification done to the file to get it printed in aluminum. I am not 100% sure but when I asked they said they are looking into giving the option for an aluminum enclosure. He was pretty sure it may be an option. However, not sure when. In order to do it on your own, modifying the current file would likely take a lot of work. I will reach out again and see if it is likely. Also MJF is an option as well as it is much harder than FDM.
@@Yunaun85 validated w/ Pokornyi, aluminum enclosures are still coming. I would say, be patient and soon it will be available.
How much this wheel costed with out job, only parts? Thx
For just the parts it cost me around $800 USD.